[PATCH RESEND 3/4] hwmon: (sch56xx-common) Replace msleep() with usleep_range()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



msleep(1) will often sleep more than 20ms, slowing down sensor
and watchdog reads/writes. Use usleep_range() as recommended
in timers-howto.rst to fix that.

Tested on a Fujitsu Esprimo P720.

Signed-off-by: Armin Wolf <W_Armin@xxxxxx>
---
 drivers/hwmon/sch56xx-common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/sch56xx-common.c b/drivers/hwmon/sch56xx-common.c
index 0172aa16dc0c..f66e1ed4b1aa 100644
--- a/drivers/hwmon/sch56xx-common.c
+++ b/drivers/hwmon/sch56xx-common.c
@@ -139,7 +139,7 @@ static int sch56xx_send_cmd(u16 addr, u8 cmd, u16 reg, u8 v)
 	/* EM Interface Polling "Algorithm" */
 	for (i = 0; i < max_busy_polls + max_lazy_polls; i++) {
 		if (i >= max_busy_polls)
-			msleep(1);
+			usleep_range(1, 2);
 		/* Read Interrupt source Register */
 		val = inb(addr + 8);
 		/* Write Clear the interrupt source bits */
--
2.30.2




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux