Right now, when sch56xx-common has detected a SCH5627/SCH5636
superio chip, the corresponding module is not automatically
loaded.
Fix that by adding the necessary device tables to both modules.
Tested on a Fujitsu Esprimo P720.
Signed-off-by: Armin Wolf <W_Armin@xxxxxx>
---
drivers/hwmon/sch5627.c | 9 +++++++++
drivers/hwmon/sch5636.c | 9 +++++++++
2 files changed, 18 insertions(+)
diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c
index 8f1b569c69e7..bfff27d6c736 100644
--- a/drivers/hwmon/sch5627.c
+++ b/drivers/hwmon/sch5627.c
@@ -7,6 +7,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
@@ -456,6 +457,14 @@ static int sch5627_probe(struct platform_device *pdev)
return 0;
}
+static const struct platform_device_id sch5627_device_ids[] __initconst = {
+ {
+ .name = "sch5627",
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, sch5627_device_ids);
+
static struct platform_driver sch5627_driver = {
.driver = {
.name = DRVNAME,
diff --git a/drivers/hwmon/sch5636.c b/drivers/hwmon/sch5636.c
index 39ff1c9b1df5..9ef43cbfc830 100644
--- a/drivers/hwmon/sch5636.c
+++ b/drivers/hwmon/sch5636.c
@@ -7,6 +7,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
@@ -501,6 +502,14 @@ static int sch5636_probe(struct platform_device *pdev)
return err;
}
+static const struct platform_device_id sch5636_device_ids[] __initconst = {
+ {
+ .name = "sch5636",
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, sch5636_device_ids);
+
static struct platform_driver sch5636_driver = {
.driver = {
.name = DRVNAME,
--
2.30.2
