If the watchdog was already enabled by the BIOS after booting, the watchdog infrastructure needs to regularly send keepalives to prevent a unexpected reset. WDOG_ACTIVE only serves as an status indicator for userspace, we want to use WDOG_HW_RUNNING instead. Since my Fujitsu Esprimo P720 does not support the watchdog, this change is compile-tested only. Suggested-by: Guenter Roeck <linux@xxxxxxxxxxxx> Fixes: fb551405c0f8 (watchdog: sch56xx: Use watchdog core) Signed-off-by: Armin Wolf <W_Armin@xxxxxx> --- drivers/hwmon/sch56xx-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/sch56xx-common.c b/drivers/hwmon/sch56xx-common.c index f66e1ed4b1aa..2cd146fd0562 100644 --- a/drivers/hwmon/sch56xx-common.c +++ b/drivers/hwmon/sch56xx-common.c @@ -427,7 +427,7 @@ void sch56xx_watchdog_register(struct device *parent, u16 addr, u32 revision, data->wddev.max_timeout = 255 * 60; watchdog_set_nowayout(&data->wddev, nowayout); if (output_enable & SCH56XX_WDOG_OUTPUT_ENABLE) - set_bit(WDOG_ACTIVE, &data->wddev.status); + set_bit(WDOG_HW_RUNNING, &data->wddev.status); /* Since the watchdog uses a downcounter there is no register to read the BIOS set timeout from (if any was set at all) -> -- 2.30.2
