From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
BCM6123 is an Fixed-Ratio DC-DC Converter.
Signed-off-by: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
Signed-off-by: Marcello Sylvester Bauer <sylv@xxxxxxx>
---
drivers/hwmon/pmbus/Kconfig | 9 ++++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/bcm6123.c | 90 +++++++++++++++++++++++++++++++++++
3 files changed, 100 insertions(+)
create mode 100644 drivers/hwmon/pmbus/bcm6123.c
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index c96f7b7338bd..62dac90631c5 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -48,6 +48,15 @@ config SENSORS_ADM1275
This driver can also be built as a module. If so, the module will
be called adm1275.
+config SENSORS_BCM6123
+ tristate "Vicor BCM6123 Compatible Power Supplies"
+ help
+ If you say yes here you get hardware monitoring support for Vicor
+ BCM6123 Power Supplies.
+
+ This driver can also be built as a module. If so, the module will
+ be called bcm6123.
+
config SENSORS_BEL_PFE
tristate "Bel PFE Compatible Power Supplies"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index e5935f70c9e0..2918c2ea7bc5 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_PMBUS) += pmbus_core.o
obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
+obj-$(CONFIG_SENSORS_BCM6123) += bcm6123.o
obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
obj-$(CONFIG_SENSORS_BPA_RS600) += bpa-rs600.o
obj-$(CONFIG_SENSORS_DELTA_AHE50DC_FAN) += delta-ahe50dc-fan.o
diff --git a/drivers/hwmon/pmbus/bcm6123.c b/drivers/hwmon/pmbus/bcm6123.c
new file mode 100644
index 000000000000..78fc259bc40f
--- /dev/null
+++ b/drivers/hwmon/pmbus/bcm6123.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Infineon bcm6123
+ *
+ * Copyright (c) 2021 9elements GmbH
+ *
+ * VOUT_MODE is not supported by the device. The driver fakes VOUT linear16
+ * mode with exponent value -8 as direct mode with m=256/b=0/R=0.
+ *
+ * The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however
+ * this driver does not currently support them.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+static struct pmbus_platform_data bcm6123_plat_data = {
+ .flags = PMBUS_NO_CAPABILITY,
+};
+
+static struct pmbus_driver_info bcm6123_info = {
+ .pages = 2,
+ .format[PSC_VOLTAGE_IN] = direct,
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .format[PSC_CURRENT_IN] = direct,
+ .format[PSC_CURRENT_OUT] = direct,
+ .format[PSC_POWER] = linear,
+ .format[PSC_TEMPERATURE] = linear,
+ .m[PSC_VOLTAGE_IN] = 1,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = 1,
+ .m[PSC_VOLTAGE_OUT] = 1,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = 1,
+ .m[PSC_CURRENT_IN] = 1,
+ .b[PSC_CURRENT_IN] = 0,
+ .R[PSC_CURRENT_IN] = 3,
+ .m[PSC_CURRENT_OUT] = 1,
+ .b[PSC_CURRENT_OUT] = 0,
+ .R[PSC_CURRENT_OUT] = 2,
+ .func[0] = 0, /* Summing page without voltage readings */
+ .func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_IIN | PMBUS_HAVE_POUT,
+};
+
+static int bcm6123_probe(struct i2c_client *client)
+{
+ client->dev.platform_data = &bcm6123_plat_data;
+
+ return pmbus_do_probe(client, &bcm6123_info);
+}
+
+static const struct i2c_device_id bcm6123_id[] = {
+ {"bcm6123", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, bcm6123_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id bcm6123_of_match[] = {
+ { .compatible = "vicor,bcm6123" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bcm6123_of_match);
+#endif
+
+/* This is the driver that will be inserted */
+static struct i2c_driver bcm6123_driver = {
+ .driver = {
+ .name = "bcm6123",
+ .of_match_table = of_match_ptr(bcm6123_of_match),
+ },
+ .probe_new = bcm6123_probe,
+ .id_table = bcm6123_id,
+};
+
+module_i2c_driver(bcm6123_driver);
+
+MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("PMBus driver for Vicor bcm6123");
+MODULE_LICENSE("GPL");
--
2.33.1
