Hello. On neděle 16. ledna 2022 21:18:38 CET Eugene Shalygin wrote: > This patchset replaces the HWMON asus_wmi_ec_sensors driver with > an implementation that does not use WMI but queries the embedded > controller directly. > > That provides two enhancements: sensor reading became quicker (on some > systems or kernel configuration it took almost a full second to read > all the sensors, that transfers less than 15 bytes of data), the driver > became more fexible. The driver now relies on ACPI mutex to lock access > to the EC, in the same way as the WMI DSDT code does. > > Changes in v6: > - Fixed hwmon device name replacing dashes with underscores. > - Removed module verion. > - Fixed condition for asus_wmi_ec_Sensors in KBuild. For the series: Tested-by: Oleksandr Natalenko <oleksandr@xxxxxxxxxxxxxx> > Changes in v5: > - Place the sensors bitset directly into the driver_data field of the > dmi_system_id struct. > - Replace doc comments with regular ones. > > Changes in v4: > - Deprecate the wmi driver rather than removing it. > > Changes in v3: > - Remove BIOS version checks and BIOS version dependent mutex path. > > Changes in v2: > - Replace sensor flags enum with bitset > - Replace module init/probe functions with module_platform_driver_probe > and ask the platform drivers framework to load the driver when ACPI > EC is found (ACPI ID "PNP0C09"). > - Extend board data with BIOS version attribute for the mutex path to be > BIOS version dependent. > - Add module parameter to override the mutex path. > > Eugene Shalygin (3): > hwmon: (asus-ec-sensors) add driver for ASUS EC > hwmon: (asus-ec-sensors) update documentation > hwmon: deprecate asis_wmi_ec_sensors driver > > Documentation/hwmon/asus_ec_sensors.rst | 51 ++ > Documentation/hwmon/asus_wmi_ec_sensors.rst | 38 -- > MAINTAINERS | 6 + > drivers/hwmon/Kconfig | 16 +- > drivers/hwmon/Makefile | 1 + > drivers/hwmon/asus-ec-sensors.c | 690 ++++++++++++++++++++ > 6 files changed, 763 insertions(+), 39 deletions(-) > create mode 100644 Documentation/hwmon/asus_ec_sensors.rst > delete mode 100644 Documentation/hwmon/asus_wmi_ec_sensors.rst > create mode 100644 drivers/hwmon/asus-ec-sensors.c Thanks. -- Oleksandr Natalenko (post-factum)
