On Fri, Oct 22, 2021 at 11:00:29PM +0300, Denis Pauk wrote: > Linux HWMON sensors driver for ASUS motherboards to read > sensors from the embedded controller. > > Many ASUS motherboards do not publish all the available > sensors via the Super I/O chip but the missing ones are > available through the embedded controller (EC) registers. > > This driver implements reading those sensor data via the > WMI method BREC, which is known to be present in all ASUS > motherboards based on the AMD 500 series chipsets (and > probably is available in other models too). The driver > needs to know exact register addresses for the sensors and > thus support for each motherboard has to be added explicitly. > > The EC registers do not provide critical values for the > sensors and as such they are not published to the HWMON. > > Supported motherboards: > * PRIME X570-PRO > * Pro WS X570-ACE > * ROG CROSSHAIR VIII HERO > * ROG CROSSHAIR VIII DARK HERO > * ROG CROSSHAIR VIII FORMULA > * ROG STRIX X570-E GAMING > * ROG STRIX B550-E GAMING > > Signed-off-by: Denis Pauk <pauk.denis@xxxxxxxxx> > Co-developed-by: Eugene Shalygin <eugene.shalygin@xxxxxxxxx> > Signed-off-by: Eugene Shalygin <eugene.shalygin@xxxxxxxxx> > Tested-by: Tor Vic <torvic9@xxxxxxxxxxx> > Tested-by: Oleksandr Natalenko <oleksandr@xxxxxxxxxxxxxx> > > --- > Changes in v8: > - Fix codestyle in defines and comments. > - Fix buffer length calculation. > - Use hex2bin/bin2hex for convert values in buffers. > - Remove unrequired acpi_os_free usage. > - Call mutex_lock inside of functions. > > Changes in v7: > - Use dmi_first_match for directly get sensors list by board. > - Add depends on ACPI_WMI to Kconfig. > - Add response buffer size check in asus_wmi_ec_decode_reply_buffer. > - Clean up defines names. > > Changes in v6: > - Generate query for all sensors on sensors setup > - Move binary to sensor value logic to separate get_sensor_value > (by Eugene Shalygin) > - Add asus_wmi_ec_sensor to documentation index. > - Use acpi_os_free without NULL pointer check. > > Changes in v5: > - Fixes build issue reported by kernel test robot with disabled ACPI_WMI. > > Changes in v4: > - implement wmi driver instead platform driver. > > Changes in v3: > - Use MODULE_DEVICE_TABLE for match devices. > - Use get_unaligned_be32 instead incorrectly used get_unaligned_le32. > - Add documentaion for driver. > > Changes in v2: > - Use utf8s_to_utf16s/utf16s_to_utf8s instead handmade fuctions. > - Use post increment. > - Use get_unaligned* for convert values. > - Use PTR_ERR_OR_ZERO. > - Specify per-board sensors in a declarative way (by Eugene Shalygin). > --- > Documentation/hwmon/asus_wmi_ec_sensors.rst | 35 ++ > Documentation/hwmon/index.rst | 1 + > MAINTAINERS | 7 + > drivers/hwmon/Kconfig | 12 + > drivers/hwmon/Makefile | 1 + > drivers/hwmon/asus_wmi_ec_sensors.c | 618 ++++++++++++++++++++ > 6 files changed, 674 insertions(+) > create mode 100644 Documentation/hwmon/asus_wmi_ec_sensors.rst > create mode 100644 drivers/hwmon/asus_wmi_ec_sensors.c > > diff --git a/Documentation/hwmon/asus_wmi_ec_sensors.rst b/Documentation/hwmon/asus_wmi_ec_sensors.rst > new file mode 100644 > index 000000000000..7edf08579baa > --- /dev/null > +++ b/Documentation/hwmon/asus_wmi_ec_sensors.rst > @@ -0,0 +1,35 @@ > +Kernel driver asus_wmi_ec_sensors > +================================= > + > +Supported boards: > + * PRIME X570-PRO, > + * Pro WS X570-ACE, > + * ROG CROSSHAIR VIII DARK HERO, > + * ROG CROSSHAIR VIII FORMULA, > + * ROG CROSSHAIR VIII HERO, > + * ROG STRIX B550-E GAMING, > + * ROG STRIX X570-E GAMING. > + > +Authors: > + - Eugene Shalygin <eugene.shalygin@xxxxxxxxx> > + > +Description: > +------------ > +ASUS mainboards publish hardware monitoring information via Super I/O > +chip and the ACPI embedded controller (EC) registers. Some of the sensors > +are only available via the EC. > + > +ASUS WMI interface provides a method (BREC) to read data from EC registers, > +which is utilized by this driver to publish those sensor readings to the > +HWMON system. The driver is aware of and reads the following sensors: > + > +1. Chipset (PCH) temperature > +2. CPU package temperature > +3. Motherboard temperature > +4. Readings from the T_Sensor header > +5. VRM temperature > +6. CPU_Opt fan RPM > +7. Chipset fan RPM > +8. Readings from the "Water flow meter" header (RPM) > +9. Readings from the "Water In" and "Water Out" temperature headers > +10. CPU current > diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst > index 7046bf1870d9..23deb1a1202f 100644 > --- a/Documentation/hwmon/index.rst > +++ b/Documentation/hwmon/index.rst > @@ -43,6 +43,7 @@ Hardware Monitoring Kernel Drivers > asb100 > asc7621 > aspeed-pwm-tacho > + asus_wmi_ec_sensors > bcm54140 > bel-pfe > bpa-rs600 > diff --git a/MAINTAINERS b/MAINTAINERS > index cc5eaf4e65dc..05448435991d 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -2937,6 +2937,13 @@ W: http://acpi4asus.sf.net > F: drivers/platform/x86/asus*.c > F: drivers/platform/x86/eeepc*.c > > +ASUS WMI HARDWARE MONITOR DRIVER > +M: Eugene Shalygin <eugene.shalygin@xxxxxxxxx> > +M: Denis Pauk <pauk.denis@xxxxxxxxx> > +L: linux-hwmon@xxxxxxxxxxxxxxx > +S: Maintained > +F: drivers/hwmon/asus_wmi_ec_sensors.c > + > ASUS WIRELESS RADIO CONTROL DRIVER > M: João Paulo Rechi Vita <jprvita@xxxxxxxxx> > L: platform-driver-x86@xxxxxxxxxxxxxxx > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 7fde4c6e1e7f..01b6338d70ff 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -2215,6 +2215,18 @@ config SENSORS_ATK0110 > This driver can also be built as a module. If so, the module > will be called asus_atk0110. > > +config SENSORS_ASUS_WMI_EC > + tristate "ASUS WMI B550/X570" > + depends on ACPI_WMI > + help > + If you say yes here you get support for the ACPI embedded controller > + hardware monitoring interface found in B550/X570 ASUS motherboards. > + This driver will provide readings of fans, voltages and temperatures > + through the system firmware. > + > + This driver can also be built as a module. If so, the module > + will be called asus_wmi_sensors_ec. > + > endif # ACPI > > endif # HWMON > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index baee6a8d4dd1..aae2ff5c7335 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -9,6 +9,7 @@ obj-$(CONFIG_HWMON_VID) += hwmon-vid.o > # APCI drivers > obj-$(CONFIG_SENSORS_ACPI_POWER) += acpi_power_meter.o > obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o > +obj-$(CONFIG_SENSORS_ASUS_WMI_EC) += asus_wmi_ec_sensors.o > > # Native drivers > # asb100, then w83781d go first, as they can override other drivers' addresses. > diff --git a/drivers/hwmon/asus_wmi_ec_sensors.c b/drivers/hwmon/asus_wmi_ec_sensors.c > new file mode 100644 > index 000000000000..87bd32487926 > --- /dev/null > +++ b/drivers/hwmon/asus_wmi_ec_sensors.c > @@ -0,0 +1,618 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * HWMON driver for ASUS B550/X570 motherboards that publish sensor > + * values via the embedded controller registers. > + * > + * Copyright (C) 2021 Eugene Shalygin <eugene.shalygin@xxxxxxxxx> > + * Copyright (C) 2018-2019 Ed Brindley <kernel@xxxxxxxxxxxxx> > + * > + * EC provides: > + * Chipset temperature, > + * CPU temperature, > + * Motherboard temperature, > + * T_Sensor temperature, > + * VRM temperature, > + * Water In temperature, > + * Water Out temperature, > + * CPU Optional Fan RPM, > + * Chipset Fan RPM, > + * Water Flow Fan RPM, > + * CPU current. > + */ > + > +#include <linux/acpi.h> > +#include <linux/dmi.h> > +#include <linux/init.h> > +#include <linux/jiffies.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/mutex.h> > +#include <linux/nls.h> > +#include <linux/units.h> > +#include <linux/wmi.h> > +#include <asm/unaligned.h> > +#include <linux/hwmon.h> > +#include <linux/hwmon-sysfs.h> > + > +#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66" > +#define ASUSWMI_METHODID_BLOCK_READ_EC 0x42524543 /* BREC */ > +/* From the ASUS DSDT source */ > +#define ASUSWMI_BREC_REGISTERS_MAX 0x10 > +#define ASUSWMI_MAX_BUF_LEN 0x80 > +#define SENSOR_LABEL_LEN 0x10 > + > +static u32 hwmon_attributes[] = { > + [hwmon_chip] = HWMON_C_REGISTER_TZ, > + [hwmon_temp] = HWMON_T_INPUT | HWMON_T_LABEL, > + [hwmon_in] = HWMON_I_INPUT | HWMON_I_LABEL, > + [hwmon_curr] = HWMON_C_INPUT | HWMON_C_LABEL, > + [hwmon_fan] = HWMON_F_INPUT | HWMON_F_LABEL, > +}; > + > +struct asus_wmi_ec_sensor_address { > + u8 index; > + u8 bank; > + u8 size; > +}; > + > +#define MAKE_SENSOR_ADDRESS(size_i, bank_i, index_i) { \ > + .size = size_i, \ > + .bank = bank_i, \ > + .index = index_i \ > +} > + > +struct ec_sensor_info { > + char label[SENSOR_LABEL_LEN]; > + enum hwmon_sensor_types type; > + struct asus_wmi_ec_sensor_address addr; > +}; > + > +#define EC_SENSOR(sensor_label, sensor_type, size, bank, index) { \ > + .label = sensor_label, \ > + .type = sensor_type, \ > + .addr = MAKE_SENSOR_ADDRESS(size, bank, index) \ > +} > + > +enum known_ec_sensor { > + SENSOR_TEMP_CHIPSET, > + SENSOR_TEMP_CPU, > + SENSOR_TEMP_MB, > + SENSOR_TEMP_T_SENSOR, > + SENSOR_TEMP_VRM, > + SENSOR_FAN_CPU_OPT, > + SENSOR_FAN_CHIPSET, > + SENSOR_FAN_WATER_FLOW, > + SENSOR_CURR_CPU, > + SENSOR_TEMP_WATER_IN, > + SENSOR_TEMP_WATER_OUT, > + SENSOR_MAX > +}; > + > +/* All known sensors for ASUS EC controllers */ > +static const struct ec_sensor_info known_ec_sensors[] = { > + [SENSOR_TEMP_CHIPSET] = EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a), > + [SENSOR_TEMP_CPU] = EC_SENSOR("CPU", hwmon_temp, 1, 0x00, 0x3b), > + [SENSOR_TEMP_MB] = EC_SENSOR("Motherboard", hwmon_temp, 1, 0x00, 0x3c), > + [SENSOR_TEMP_T_SENSOR] = EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d), > + [SENSOR_TEMP_VRM] = EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e), > + [SENSOR_FAN_CPU_OPT] = EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0), > + [SENSOR_FAN_CHIPSET] = EC_SENSOR("Chipset", hwmon_fan, 2, 0x00, 0xb4), > + [SENSOR_FAN_WATER_FLOW] = EC_SENSOR("Water_Flow", hwmon_fan, 2, 0x00, 0xbc), > + [SENSOR_CURR_CPU] = EC_SENSOR("CPU", hwmon_curr, 1, 0x00, 0xf4), > + [SENSOR_TEMP_WATER_IN] = EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x00), > + [SENSOR_TEMP_WATER_OUT] = EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01), > +}; > + > +struct asus_wmi_data { > + const enum known_ec_sensor known_board_sensors[SENSOR_MAX + 1]; > +}; > + > +/* boards with EC support */ > +static struct asus_wmi_data sensors_board_PW_X570_P = { > + .known_board_sensors = { > + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, SENSOR_TEMP_VRM, > + SENSOR_FAN_CHIPSET, > + SENSOR_MAX > + }, > +}; > + > +static struct asus_wmi_data sensors_board_PW_X570_A = { > + .known_board_sensors = { > + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, SENSOR_TEMP_VRM, > + SENSOR_FAN_CHIPSET, > + SENSOR_CURR_CPU, > + SENSOR_MAX > + }, > +}; > + > +static struct asus_wmi_data sensors_board_R_C8H = { > + .known_board_sensors = { > + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, > + SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM, > + SENSOR_TEMP_WATER_IN, SENSOR_TEMP_WATER_OUT, > + SENSOR_FAN_CPU_OPT, SENSOR_FAN_CHIPSET, SENSOR_FAN_WATER_FLOW, > + SENSOR_CURR_CPU, > + SENSOR_MAX > + }, > +}; > + > +/* Same as Hero but without chipset fan */ > +static struct asus_wmi_data sensors_board_R_C8DH = { > + .known_board_sensors = { > + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, > + SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM, > + SENSOR_TEMP_WATER_IN, SENSOR_TEMP_WATER_OUT, > + SENSOR_FAN_CPU_OPT, SENSOR_FAN_WATER_FLOW, > + SENSOR_CURR_CPU, > + SENSOR_MAX > + }, > +}; > + > +/* Same as Hero but without water */ > +static struct asus_wmi_data sensors_board_R_C8F = { > + .known_board_sensors = { > + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, > + SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM, > + SENSOR_FAN_CPU_OPT, SENSOR_FAN_CHIPSET, > + SENSOR_CURR_CPU, > + SENSOR_MAX > + }, > +}; > + > +static struct asus_wmi_data sensors_board_RS_B550_E_G = { > + .known_board_sensors = { > + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, > + SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM, > + SENSOR_FAN_CPU_OPT, > + SENSOR_MAX > + }, > +}; > + > +static struct asus_wmi_data sensors_board_RS_X570_E_G = { > + .known_board_sensors = { > + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, > + SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM, > + SENSOR_FAN_CHIPSET, > + SENSOR_CURR_CPU, > + SENSOR_MAX > + }, > +}; > + > +#define DMI_EXACT_MATCH_ASUS_BOARD_NAME(name, sensors) { \ > + .matches = { \ > + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, \ > + "ASUSTeK COMPUTER INC."), \ > + DMI_EXACT_MATCH(DMI_BOARD_NAME, name), \ > + }, \ > + .driver_data = sensors, \ > +} > + > +static const struct dmi_system_id asus_wmi_ec_dmi_table[] = { > + DMI_EXACT_MATCH_ASUS_BOARD_NAME("PRIME X570-PRO", &sensors_board_PW_X570_P), > + DMI_EXACT_MATCH_ASUS_BOARD_NAME("Pro WS X570-ACE", &sensors_board_PW_X570_A), > + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII DARK HERO", &sensors_board_R_C8DH), > + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII FORMULA", &sensors_board_R_C8F), > + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII HERO", &sensors_board_R_C8H), > + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX B550-E GAMING", &sensors_board_RS_B550_E_G), > + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX X570-E GAMING", &sensors_board_RS_X570_E_G), > + {} > +}; > +MODULE_DEVICE_TABLE(dmi, asus_wmi_ec_dmi_table); > + > +struct ec_sensor { > + enum known_ec_sensor info_index; > + u32 cached_value; > +}; > + > +/** > + * struct asus_wmi_ec_info - sensor info. > + * @sensors: list of sensors. > + * @read_arg: UTF-16 string to pass to BRxx() WMI function. > + * @read_buffer: decoded output from WMI result. > + * @nr_sensors: number of board EC sensors. > + * @nr_registers: number of EC registers to read (sensor might span more than > + * 1 register). > + * @last_updated: in jiffies. > + */ > +struct asus_wmi_ec_info { > + struct ec_sensor sensors[SENSOR_MAX]; > + char read_arg[(ASUSWMI_BREC_REGISTERS_MAX * 4 + 1) * 2]; > + u8 read_buffer[ASUSWMI_BREC_REGISTERS_MAX]; > + unsigned int nr_sensors; > + unsigned int nr_registers; > + unsigned long last_updated; > +}; > + > +struct asus_wmi_sensors { > + /* lock access to internal cache */ > + struct mutex lock; > + struct asus_wmi_ec_info ec; > +}; > + > +static int asus_wmi_ec_fill_board_sensors(struct asus_wmi_ec_info *ec, > + const enum known_ec_sensor *bsi) > +{ > + struct ec_sensor *s = ec->sensors; > + int i; > + > + ec->nr_sensors = 0; > + ec->nr_registers = 0; > + > + for (i = 0; i < SENSOR_MAX && bsi[i] != SENSOR_MAX; i++) { > + s[i].info_index = bsi[i]; > + ec->nr_sensors++; > + ec->nr_registers += known_ec_sensors[bsi[i]].addr.size; > + } > + > + return 0; > +} > + > +/* > + * The next four functions converts to/from BRxx string argument format. > + * The format of the string is as follows: > + * * The string consists of two-byte UTF-16 characters. > + * * The value of the very first byte int the string is equal to the total > + * length of the next string in bytes, thus excluding the first two-byte > + * character. > + * * The rest of the string encodes pairs of (bank, index) pairs, where both > + * values are byte-long (0x00 to 0xFF). > + * * Numbers are encoded as UTF-16 hex values. > + */ > +static int asus_wmi_ec_decode_reply_buffer(const u8 *inp, u8 *out, u32 length) > +{ > + char buffer[ASUSWMI_MAX_BUF_LEN * 2]; > + const char *pos = buffer; > + const u8 *data = inp + 2; > + u32 len; > + > + /* Minimum of size of response and size of ACPI result*/ > + len = min_t(u32, inp[0] / 4, (length - 2) / 4); > + len = min_t(u32, len, ASUSWMI_MAX_BUF_LEN); > + > + utf16s_to_utf8s((wchar_t *)data, len * 2, UTF16_LITTLE_ENDIAN, buffer, len * 2); > + > + return hex2bin(out, pos, len); > +} > + > +static void asus_wmi_ec_encode_registers(const u16 *registers, u8 len, char *out) > +{ > + char buffer[ASUSWMI_MAX_BUF_LEN * 2]; > + char *pos = buffer; > + unsigned int i; > + u8 byte; > + > + *out++ = len * 8; > + *out++ = 0; > + > + for (i = 0; i < len; i++) { > + byte = registers[i] >> 8; > + pos = bin2hex(pos, &byte, 1); > + byte = registers[i]; > + pos = bin2hex(pos, &byte, 1); > + } > + > + utf8s_to_utf16s(buffer, len * 4, UTF16_LITTLE_ENDIAN, (wchar_t *)out, len * 4); > +} > + > +static void asus_wmi_ec_make_block_read_query(struct asus_wmi_ec_info *ec) > +{ > + u16 registers[ASUSWMI_BREC_REGISTERS_MAX]; > + const struct ec_sensor_info *si; > + int i, j, register_idx = 0; > + > + for (i = 0; i < ec->nr_sensors; i++) { > + si = &known_ec_sensors[ec->sensors[i].info_index]; > + for (j = 0; j < si->addr.size; j++, register_idx++) > + registers[register_idx] = (si->addr.bank << 8) + si->addr.index + j; > + } > + > + asus_wmi_ec_encode_registers(registers, ec->nr_registers, ec->read_arg); > +} > + > +static int asus_wmi_ec_block_read(u32 method_id, char *query, u8 *out) > +{ > + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; > + struct acpi_buffer input; > + union acpi_object *obj; > + acpi_status status; > + > + /* The first byte of the BRxx() argument string has to be the string size. */ > + input.length = query[0] + 2; > + input.pointer = query; > + status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0, > + method_id, &input, &output); Presumably wmi_evaluate_method() allocates the response bufer since ACPI_ALLOCATE_BUFFER is set. How is it released ? If there is some infrastructure magic involved here, it should be documented in a comment, especially since other similar code does release the buffer, and I don't immediately see how this code is different. /* releasing the buffer is not needed because that is handed in ... */ > + if (ACPI_FAILURE(status)) > + return -EIO; > + > + obj = output.pointer; > + if (!obj || obj->type != ACPI_TYPE_BUFFER || obj->buffer.length < 2) > + return -EIO; > + > + return asus_wmi_ec_decode_reply_buffer(obj->buffer.pointer, out, obj->buffer.length); > +} > + > +static inline u32 get_sensor_value(const struct ec_sensor_info *si, u8 *data) > +{ > + switch (si->addr.size) { > + case 1: > + return *data; > + case 2: > + return get_unaligned_be16(data); > + case 4: > + return get_unaligned_be32(data); > + default: > + return 0; > + } > +} > + > +static void asus_wmi_ec_update_ec_sensors(struct asus_wmi_ec_info *ec) > +{ > + const struct ec_sensor_info *si; > + u8 i_sensor; > + struct ec_sensor *s; > + u8 *data; > + > + data = ec->read_buffer; > + for (i_sensor = 0; i_sensor < ec->nr_sensors; i_sensor++) { > + s = &ec->sensors[i_sensor]; > + si = &known_ec_sensors[s->info_index]; > + s->cached_value = get_sensor_value(si, data); > + data += si->addr.size; > + } > +} > + > +static int asus_wmi_ec_scale_sensor_value(u32 value, int data_type) > +{ > + switch (data_type) { > + case hwmon_curr: > + case hwmon_temp: > + case hwmon_in: > + return value * MILLI; > + default: > + return value; > + } > +} > + > +static int asus_wmi_ec_find_sensor_index(const struct asus_wmi_ec_info *ec, > + enum hwmon_sensor_types type, int channel) > +{ > + int i; > + > + for (i = 0; i < ec->nr_sensors; i++) { > + if (known_ec_sensors[ec->sensors[i].info_index].type == type) { > + if (channel == 0) > + return i; > + > + channel--; > + } > + } > + return -EINVAL; > +} > + > +static int asus_wmi_ec_get_cached_value_or_update(int sensor_index, > + struct asus_wmi_sensors *state, > + u32 *value) > +{ > + int ret; > + > + mutex_lock(&state->lock); > + > + if (time_after(jiffies, state->ec.last_updated + HZ)) { > + ret = asus_wmi_ec_block_read(ASUSWMI_METHODID_BLOCK_READ_EC, > + state->ec.read_arg, > + state->ec.read_buffer); > + if (ret) { > + mutex_unlock(&state->lock); > + return ret; > + } Why not follow coding style guidelines ? int ret = 0; ... if (ret) goto unlock: > + > + asus_wmi_ec_update_ec_sensors(&state->ec); > + state->ec.last_updated = jiffies; > + } > + > + *value = state->ec.sensors[sensor_index].cached_value; > + unlock: > + mutex_unlock(&state->lock); > + > + return 0; > +} > + > +/* Now follow the functions that implement the hwmon interface */ > + > +static int asus_wmi_ec_hwmon_read(struct device *dev, enum hwmon_sensor_types type, > + u32 attr, int channel, long *val) > +{ > + struct asus_wmi_sensors *sensor_data = dev_get_drvdata(dev); > + int ret, sidx, info_index; > + u32 value = 0; > + > + sidx = asus_wmi_ec_find_sensor_index(&sensor_data->ec, type, channel); > + if (sidx < 0) > + return sidx; > + > + ret = asus_wmi_ec_get_cached_value_or_update(sidx, sensor_data, &value); > + if (ret) > + return ret; > + > + info_index = sensor_data->ec.sensors[sidx].info_index; > + *val = asus_wmi_ec_scale_sensor_value(value, > + known_ec_sensors[info_index].type); > + > + return ret; > +} > + > +static int asus_wmi_ec_hwmon_read_string(struct device *dev, > + enum hwmon_sensor_types type, u32 attr, > + int channel, const char **str) > +{ > + struct asus_wmi_sensors *sensor_data = dev_get_drvdata(dev); > + int sensor_index; > + > + sensor_index = asus_wmi_ec_find_sensor_index(&sensor_data->ec, type, channel); > + *str = known_ec_sensors[sensor_data->ec.sensors[sensor_index].info_index].label; > + > + return 0; > +} > + > +static umode_t asus_wmi_ec_hwmon_is_visible(const void *drvdata, > + enum hwmon_sensor_types type, u32 attr, > + int channel) > +{ > + const struct asus_wmi_sensors *sensor_data = drvdata; > + int index; > + > + index = asus_wmi_ec_find_sensor_index(&sensor_data->ec, type, channel); > + > + return index < 0 ? 0 : 0444; > +} > + > +static int asus_wmi_hwmon_add_chan_info(struct hwmon_channel_info *asus_wmi_hwmon_chan, > + struct device *dev, int num, > + enum hwmon_sensor_types type, u32 config) > +{ > + u32 *cfg; > + > + cfg = devm_kcalloc(dev, num + 1, sizeof(*cfg), GFP_KERNEL); > + if (!cfg) > + return -ENOMEM; > + > + asus_wmi_hwmon_chan->type = type; > + asus_wmi_hwmon_chan->config = cfg; > + memset32(cfg, config, num); > + > + return 0; > +} > + > +static const struct hwmon_ops asus_wmi_ec_hwmon_ops = { > + .is_visible = asus_wmi_ec_hwmon_is_visible, > + .read = asus_wmi_ec_hwmon_read, > + .read_string = asus_wmi_ec_hwmon_read_string, > +}; > + > +static struct hwmon_chip_info asus_wmi_ec_chip_info = { > + .ops = &asus_wmi_ec_hwmon_ops, > +}; > + > +static int asus_wmi_ec_configure_sensor_setup(struct device *dev, > + struct asus_wmi_sensors *sensor_data, > + const enum known_ec_sensor *bsi) > +{ > + struct hwmon_channel_info *asus_wmi_hwmon_chan; > + const struct hwmon_channel_info **ptr_asus_wmi_ci; > + int nr_count[hwmon_max] = {}, nr_types = 0; > + const struct hwmon_chip_info *chip_info; > + const struct ec_sensor_info *si; > + enum hwmon_sensor_types type; > + struct device *hwdev; > + int i, ret; > + > + ret = asus_wmi_ec_fill_board_sensors(&sensor_data->ec, bsi); > + if (ret) > + return ret; > + > + if (!sensor_data->ec.nr_sensors) > + return -ENODEV; > + > + for (i = 0; i < sensor_data->ec.nr_sensors; i++) { > + si = &known_ec_sensors[sensor_data->ec.sensors[i].info_index]; > + if (!nr_count[si->type]) > + nr_types++; > + nr_count[si->type]++; > + } > + > + if (nr_count[hwmon_temp]) { > + nr_count[hwmon_chip]++; > + nr_types++; > + } > + > + /* > + * If we can get values for all the registers in a single query, > + * the query will not change from call to call. > + */ > + asus_wmi_ec_make_block_read_query(&sensor_data->ec); > + > + asus_wmi_hwmon_chan = devm_kcalloc(dev, nr_types, > + sizeof(*asus_wmi_hwmon_chan), > + GFP_KERNEL); > + if (!asus_wmi_hwmon_chan) > + return -ENOMEM; > + > + ptr_asus_wmi_ci = devm_kcalloc(dev, nr_types + 1, > + sizeof(*ptr_asus_wmi_ci), GFP_KERNEL); > + if (!ptr_asus_wmi_ci) > + return -ENOMEM; > + > + asus_wmi_ec_chip_info.info = ptr_asus_wmi_ci; > + chip_info = &asus_wmi_ec_chip_info; > + > + for (type = 0; type < hwmon_max; type++) { > + if (!nr_count[type]) > + continue; > + > + ret = asus_wmi_hwmon_add_chan_info(asus_wmi_hwmon_chan, dev, > + nr_count[type], type, > + hwmon_attributes[type]); > + if (ret) > + return ret; > + > + *ptr_asus_wmi_ci++ = asus_wmi_hwmon_chan++; > + } > + > + dev_dbg(dev, "board has %d EC sensors that span %d registers", > + sensor_data->ec.nr_sensors, > + sensor_data->ec.nr_registers); > + > + hwdev = devm_hwmon_device_register_with_info(dev, "asus_wmi_ec_sensors", > + sensor_data, chip_info, NULL); > + > + return PTR_ERR_OR_ZERO(hwdev); > +} > + > +static int asus_wmi_probe(struct wmi_device *wdev, const void *context) > +{ > + struct asus_wmi_sensors *sensor_data; > + struct asus_wmi_data *board_sensors; > + const enum known_ec_sensor *bsi; > + const struct dmi_system_id *dmi_id; > + struct device *dev = &wdev->dev; > + > + dmi_id = dmi_first_match(asus_wmi_ec_dmi_table); > + if (!dmi_id) > + return -ENODEV; > + > + board_sensors = dmi_id->driver_data; > + if (!board_sensors) > + return -ENODEV; > + > + bsi = board_sensors->known_board_sensors; > + > + sensor_data = devm_kzalloc(dev, sizeof(*sensor_data), GFP_KERNEL); > + if (!sensor_data) > + return -ENOMEM; > + > + mutex_init(&sensor_data->lock); > + > + dev_set_drvdata(dev, sensor_data); > + > + return asus_wmi_ec_configure_sensor_setup(dev, > + sensor_data, bsi); > +} > + > +static const struct wmi_device_id asus_ec_wmi_id_table[] = { > + { ASUSWMI_MONITORING_GUID, NULL }, > + { } > +}; > + > +static struct wmi_driver asus_sensors_wmi_driver = { > + .driver = { > + .name = "asus_wmi_ec_sensors", > + }, > + .id_table = asus_ec_wmi_id_table, > + .probe = asus_wmi_probe, > +}; > +module_wmi_driver(asus_sensors_wmi_driver); > + > +MODULE_AUTHOR("Ed Brindley <kernel@xxxxxxxxxxxxx>"); > +MODULE_AUTHOR("Eugene Shalygin <eugene.shalygin@xxxxxxxxx>"); > +MODULE_DESCRIPTION("Asus WMI Sensors Driver"); > +MODULE_LICENSE("GPL"); > -- > 2.33.0 >
