Re: [PATCH v6 1/2] hwmon: (asus_wmi_ec_sensors) Support B550 Asus WMI.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-10-14T10:25+0300, Denis Pauk wrote:
> +static struct asus_wmi_data *board_sensors;
> +
> +static int __init asus_wmi_dmi_matched(const struct dmi_system_id *d)
> +{
> +	board_sensors = d->driver_data;
> +	return 0;
> +}
> +
> +#define DMI_EXACT_MATCH_ASUS_BOARD_NAME(name, sensors) \
> +	{ \
> +		.callback = asus_wmi_dmi_matched, \
> +		.matches = { \
> +			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, \
> +					"ASUSTeK COMPUTER INC."), \
> +			DMI_EXACT_MATCH(DMI_BOARD_NAME, name), \
> +		}, \
> +		.driver_data = sensors, \
> +	}
> +
> +static const struct dmi_system_id asus_wmi_ec_dmi_table[] = {
> +	DMI_EXACT_MATCH_ASUS_BOARD_NAME("PRIME X570-PRO", &sensors_board_PW_X570_P),
> +	DMI_EXACT_MATCH_ASUS_BOARD_NAME("Pro WS X570-ACE", &sensors_board_PW_X570_A),
> +	DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII DARK HERO", &sensors_board_R_C8DH),
> +	DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII FORMULA", &sensors_board_R_C8F),
> +	DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII HERO", &sensors_board_R_C8H),
> +	DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX B550-E GAMING", &sensors_board_RS_B550_E_G),
> +	DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX X570-E GAMING", &sensors_board_RS_X570_E_G),
> +	{}
> +};
> +MODULE_DEVICE_TABLE(dmi, asus_wmi_ec_dmi_table);
> +
> +/*
> + * The next four functions converts to/from BRxx string argument format
> + * The format of the string is as follows:
> + * The string consists of two-byte UTF-16 characters
> + * The value of the very first byte int the string is equal to the total length
> + * of the next string in bytes, thus excluding the first two-byte character
> + * The rest of the string encodes pairs of (bank, index) pairs, where both
> + * values are byte-long (0x00 to 0xFF)
> + * Numbers are encoded as UTF-16 hex values
> + */
> +static void asus_wmi_ec_decode_reply_buffer(const u8 *inp, u8 *out)
> +{
> +	unsigned int len = ACPI_MIN(ASUS_WMI_MAX_BUF_LEN, inp[0] / 4);

The general `min()` would be better.
(Or `min3()` when also validating the ACPI buffer, see below)

> +	char buffer[ASUS_WMI_MAX_BUF_LEN * 2];
> +	const char *pos = buffer;
> +	const u8 *data = inp + 2;
> +	unsigned int i;
> +
> +	utf16s_to_utf8s((wchar_t *)data, len * 2,  UTF16_LITTLE_ENDIAN, buffer, len * 2);
> +
> +	for (i = 0; i < len; i++, pos += 2)
> +		out[i] = (hex_to_bin(pos[0]) << 4) + hex_to_bin(pos[1]);
> +}
> +
> +static int asus_wmi_ec_block_read(u32 method_id, char *query, u8 *out)
> +{
> +#if IS_ENABLED(CONFIG_ACPI_WMI)
> +	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER,
> +				      NULL };
> +	struct acpi_buffer input;
> +	union acpi_object *obj;
> +	acpi_status status;
> +
> +	/* the first byte of the BRxx() argument string has to be the string size */
> +	input.length = (acpi_size)query[0] + 2;
> +	input.pointer = query;
> +	status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0, method_id, &input,
> +				     &output);
> +	if (ACPI_FAILURE(status))
> +		return -EIO;
> +
> +	obj = output.pointer;
> +	if (!obj || obj->type != ACPI_TYPE_BUFFER) {
> +		acpi_os_free(obj);
> +		return -EIO;
> +	}
> +	asus_wmi_ec_decode_reply_buffer(obj->buffer.pointer, out);

If this buffer is empty or the length in the first byte is incorrect then
out-of-bound memory will be accessed.

> +	acpi_os_free(obj);
> +	return 0;
> +#else
> +	return -EOPNOTSUPP;
> +#endif
> +}
> +
> +static int asus_wmi_ec_configure_sensor_setup(struct device *dev,
> +					      struct asus_wmi_sensors *sensor_data)
> +{
> [..]
> +}
> +
> +static int asus_wmi_probe(struct wmi_device *wdev, const void *context)
> +{
> +	struct asus_wmi_sensors *sensor_data;
> +	struct device *dev = &wdev->dev;
> +
> +	if (!dmi_check_system(asus_wmi_ec_dmi_table))
> +		return -ENODEV;

Instead of using the callback to assign the static variable `board_sensors` you
could use `dmi_first_match()` here and pass around the result explicitly.
This would remove the need for a static variable and should cut the code down a
bit.

> +	sensor_data = devm_kzalloc(dev, sizeof(struct asus_wmi_sensors),
> +				   GFP_KERNEL);
> +	if (!sensor_data)
> +		return -ENOMEM;
> +
> +	mutex_init(&sensor_data->lock);
> +
> +	dev_set_drvdata(dev, sensor_data);
> +
> +	/* ec init */
> +	return asus_wmi_ec_configure_sensor_setup(dev,
> +						  sensor_data);
> +}
> +



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux