On Sat, 09 Oct 2021 23:31:11 -0400, Oskar Senft wrote: > This change documents the device tree bindings for the Nuvoton > NCT7802Y driver. > > Signed-off-by: Oskar Senft <osk@xxxxxxxxxx> > --- > Changes from PATCH v5: > - Refactored to use patternProperties. > - Added validation for sensor-type and temperature-mode. > --- > .../bindings/hwmon/nuvoton,nct7802.yaml | 144 ++++++++++++++++++ > 1 file changed, 144 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml:41:13: [warning] wrong indentation: expected 14 but found 12 (indentation) ./Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml:48:13: [warning] wrong indentation: expected 14 but found 12 (indentation) ./Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml:53:13: [warning] wrong indentation: expected 14 but found 12 (indentation) ./Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml:66:19: [warning] wrong indentation: expected 20 but found 18 (indentation) ./Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml:85:19: [warning] wrong indentation: expected 20 but found 18 (indentation) ./Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml:90:19: [warning] wrong indentation: expected 20 but found 18 (indentation) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1538966 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
