This is a preparatory change. Upcoming patches will introduce more
per-channel parameters so it's worth organizing them into a struct.
Signed-off-by: Krzysztof Adamski <krzysztof.adamski@xxxxxxxxx>
---
drivers/hwmon/tmp421.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
index a4ac6e16d592..f3d59ea347e3 100644
--- a/drivers/hwmon/tmp421.c
+++ b/drivers/hwmon/tmp421.c
@@ -87,6 +87,10 @@ static const struct of_device_id __maybe_unused tmp421_of_match[] = {
};
MODULE_DEVICE_TABLE(of, tmp421_of_match);
+struct tmp421_channel {
+ s16 temp;
+};
+
struct tmp421_data {
struct i2c_client *client;
struct mutex update_lock;
@@ -98,7 +102,7 @@ struct tmp421_data {
unsigned long last_updated;
unsigned long channels;
u8 config;
- s16 temp[MAX_CHANNELS];
+ struct tmp421_channel channel[MAX_CHANNELS];
};
static int temp_from_raw(u16 reg, bool extended)
@@ -133,12 +137,12 @@ static int tmp421_update_device(struct tmp421_data *data)
ret = i2c_smbus_read_byte_data(client, TMP421_TEMP_MSB[i]);
if (ret < 0)
goto exit;
- data->temp[i] = ret << 8;
+ data->channel[i].temp = ret << 8;
ret = i2c_smbus_read_byte_data(client, TMP421_TEMP_LSB[i]);
if (ret < 0)
goto exit;
- data->temp[i] |= ret;
+ data->channel[i].temp |= ret;
}
data->last_updated = jiffies;
data->valid = 1;
@@ -167,7 +171,7 @@ static int tmp421_read(struct device *dev, enum hwmon_sensor_types type,
switch (attr) {
case hwmon_temp_input:
- *val = temp_from_raw(tmp421->temp[channel],
+ *val = temp_from_raw(tmp421->channel[channel].temp,
tmp421->config & TMP421_CONFIG_RANGE);
return 0;
case hwmon_temp_fault:
@@ -175,7 +179,7 @@ static int tmp421_read(struct device *dev, enum hwmon_sensor_types type,
* Any of OPEN or /PVLD bits indicate a hardware mulfunction
* and the conversion result may be incorrect
*/
- *val = !!(tmp421->temp[channel] & 0x03);
+ *val = !!(tmp421->channel[channel].temp & 0x03);
return 0;
default:
return -EOPNOTSUPP;
--
2.31.1
