This is a preparatory change. Upcoming patches will introduce more
per-channel parameters so it's worth organizing them into a struct.
Signed-off-by: Krzysztof Adamski <krzysztof.adamski@xxxxxxxxx>
---
drivers/hwmon/tmp421.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
index 2c9ba5fe5f2a..1068fe59df0b 100644
--- a/drivers/hwmon/tmp421.c
+++ b/drivers/hwmon/tmp421.c
@@ -87,6 +87,10 @@ static const struct of_device_id __maybe_unused tmp421_of_match[] = {
};
MODULE_DEVICE_TABLE(of, tmp421_of_match);
+struct tmp421_channel {
+ s16 temp;
+};
+
struct tmp421_data {
struct i2c_client *client;
struct mutex update_lock;
@@ -98,7 +102,7 @@ struct tmp421_data {
unsigned long last_updated;
unsigned long channels;
u8 config;
- s16 temp[MAX_CHANNELS];
+ struct tmp421_channel channel[MAX_CHANNELS];
};
static int temp_from_s16(s16 reg)
@@ -134,9 +138,9 @@ static struct tmp421_data *tmp421_update_device(struct device *dev)
TMP421_CONFIG_REG_1);
for (i = 0; i < data->channels; i++) {
- data->temp[i] = i2c_smbus_read_byte_data(client,
+ data->channel[i].temp = i2c_smbus_read_byte_data(client,
TMP421_TEMP_MSB[i]) << 8;
- data->temp[i] |= i2c_smbus_read_byte_data(client,
+ data->channel[i].temp |= i2c_smbus_read_byte_data(client,
TMP421_TEMP_LSB[i]);
}
data->last_updated = jiffies;
@@ -156,16 +160,16 @@ static int tmp421_read(struct device *dev, enum hwmon_sensor_types type,
switch (attr) {
case hwmon_temp_input:
if (tmp421->config & TMP421_CONFIG_RANGE)
- *val = temp_from_u16(tmp421->temp[channel]);
+ *val = temp_from_u16(tmp421->channel[channel].temp);
else
- *val = temp_from_s16(tmp421->temp[channel]);
+ *val = temp_from_s16(tmp421->channel[channel].temp);
return 0;
case hwmon_temp_fault:
/*
* The OPEN bit signals a fault. This is bit 0 of the temperature
* register (low byte).
*/
- *val = tmp421->temp[channel] & 0x01;
+ *val = tmp421->channel[channel].temp & 0x01;
return 0;
default:
return -EOPNOTSUPP;
--
2.31.1
