On Tue, Sep 21, 2021 at 7:58 AM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>
> On Mon, Sep 20, 2021 at 05:24:09PM -0500, Rob Herring wrote:
> > On Tue, Sep 07, 2021 at 03:46:14PM +0200, Krzysztof Adamski wrote:
> > > Add binding description for the per temperature channel configuration
> > > like labels and n-factor.
> > >
> > > Signed-off-by: Krzysztof Adamski <krzysztof.adamski@xxxxxxxxx>
> > > ---
> > > .../devicetree/bindings/hwmon/tmp421.yaml | 66 +++++++++++++++++++
> > > 1 file changed, 66 insertions(+)
> >
> > I'd keep this separate...
> >
> > >
> > > diff --git a/Documentation/devicetree/bindings/hwmon/tmp421.yaml b/Documentation/devicetree/bindings/hwmon/tmp421.yaml
> > > index 53940e146ee6..56085fdf1b57 100644
> > > --- a/Documentation/devicetree/bindings/hwmon/tmp421.yaml
> > > +++ b/Documentation/devicetree/bindings/hwmon/tmp421.yaml
> > > @@ -24,12 +24,49 @@ properties:
> > > reg:
> > > maxItems: 1
> > >
> > > + '#address-cells':
> > > + const: 1
> > > +
> > > + '#size-cells':
> > > + const: 0
> > > +
> > > required:
> > > - compatible
> > > - reg
> > >
> > > additionalProperties: false
> > >
> > > +patternProperties:
> > > + "^input@([0-4])$":
> > > + type: object
> > > + description: |
> > > + Represents channels of the device and their specific configuration.
> > > +
> > > + properties:
> > > + reg:
> > > + description: |
> > > + The channel number. 0 is local channel, 1-4 are remote channels
> > > + items:
> > > + minimum: 0
> > > + maximum: 4
> > > +
> > > + label:
> > > + description: |
> > > + A descriptive name for this channel, like "ambient" or "psu".
> > > +
> > > + n-factor:
> >
> > ti,n-factor
>
> n-factor isn't just supported by TI sensors, though it isn't always called
> n-factor. Maxim (eg MAX6581) uses the term "ideality factor", though they
> also refer to the factor as "N" in the datasheet.
>
> So question is if we make this ti,n-factor and maxim,n-factor, or if we make
> it generic and define some kind of generic units. Thoughts ? My personal
> preference would be a generic definition, but is not a strong preference.
generic if the units are generic. Though if the register value is
opaque to s/w, then maybe register value is fine.
> In regard to units, the n-factor is, as the name says, a factor. Default
> value is 1.008. The value range for MAX6581 is 0.999 to 1.030. For TMP421
> it is 0.706542 to 1.747977. So the scondary question is if the value
> written should be the register value (as proposed here) or the absolute
> factor (eg in micro-units).
A range, but the register value can only be 0 or 1?
>
> >
> > Needs a type reference too.
> >
> > > + description: |
> > > + The value (two's complement) to be programmed in the channel specific N correction register.
> > > + For remote channels only.
> > > + items:
> > > + minimum: 0
> > > + maximum: 1
> > > +
> > > + required:
> > > + - reg
> > > +
> > > + additionalProperties: false
> > > +
> > > examples:
> > > - |
> > > i2c {
> > > @@ -41,3 +78,32 @@ examples:
> > > reg = <0x4c>;
> > > };
> > > };
> > > + - |
> > > + i2c {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + sensor@4c {
> > > + compatible = "ti,tmp422";
> > > + reg = <0x4c>;
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + input@0 {
> > > + reg = <0x0>;
> > > + n-factor = <0x1>;
> > > + label = "local";
> > > + };
>
> In the context or other sensors, question here is if we can make the
> bindings generic. We have been discussing this for NCT7802Y. The main
> question for me is how to handle different sensor types. TMP421 is
> easy because it only has one type of sensors, but there are other
> devices which also have, for example, voltage and/or current sensors.
> NCT7802 is an example for that. We just had a set of bindings for that
> chip proposed at
> https://patchwork.kernel.org/project/linux-hwmon/patch/20210921004627.2786132-1-osk@xxxxxxxxxx/
>
> Would it be possible to determine a generic scheme that works for all
> chips ? I can see two problems:
> - How to express sensor types. The NCT7802 submission proposes another level
> of indirection, ie
>
> temperature-sensors {
> > > +
> > > + input@1 {
> > > + reg = <0x1>;
> > > + n-factor = <0x0>;
> > > + label = "somelabel";
> > > + };
> > > +
> > > + input@2 {
> > > + reg = <0x2>;
> > > + status = "disabled";
> > > + };
> > > + };
> > > + };
> };
I think the function should be within the node. Otherwise, the
addressing becomes weird (e.g. input@3 is under current-sensors or
something) with seemingly separate address spaces.
> The second question is how to express sensor index. One option is the solution
> suggested here, ie to use reg=<> as sensor index. The second is the solution
> suggested in the 7802 bindings, where the (chip specific) name is used as
> sensor index.
>
> + temperature-sensors {
> + ltd {
> + status = "disabled";
> + };
> +
> + rtd1 {
> + status = "okay";
> + type = <4> /* thermistor */;
'type' is a bit generic. We don't want the same property name to
possibly have multiple definitions.
> + };
> + };
>
> I personally don't have a strong opinion either way, but I would like to see
> a single solution for all sensor chips.
>
> Rob, do you have a preference ?
If it is how you address an instance of something which seems to be
the case here, then 'reg' should be used.
Rob
