On Thu, Aug 26, 2021 at 01:40:56PM -0500, Mario Limonciello wrote: > Tdie is an offset calculation that should only be shown when temp_offset > is actually put into a table. This is useless to show for all CPU/APU. > Show it only when necessary. > > Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx> Applied. I won't apply the other patches of the series because they either have issues or need approval from x86/pci maintainers. No reason to hold up this one or the first patch of the series, though. Side note: I accepted this patch because it _seems_ like hwinfo64 does something similar. I do hope, though, that the assertion made in the patch description is correct and that this doesn't miss CPUs where there is a (logical or real) difference between Tctl and Tdie. Guenter > --- > drivers/hwmon/k10temp.c | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c > index 41d9c0c0a1f1..e8ec0e36fc3b 100644 > --- a/drivers/hwmon/k10temp.c > +++ b/drivers/hwmon/k10temp.c > @@ -435,7 +435,6 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id) > } else if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) { > data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK; > data->read_tempreg = read_tempreg_nb_zen; > - data->show_temp |= BIT(TDIE_BIT); /* show Tdie */ > data->is_zen = true; > > switch (boot_cpu_data.x86_model) { > @@ -457,7 +456,6 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id) > } else if (boot_cpu_data.x86 == 0x19) { > data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK; > data->read_tempreg = read_tempreg_nb_zen; > - data->show_temp |= BIT(TDIE_BIT); > data->is_zen = true; > > switch (boot_cpu_data.x86_model) { > @@ -478,6 +476,7 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id) > > if (boot_cpu_data.x86 == entry->model && > strstr(boot_cpu_data.x86_model_id, entry->id)) { > + data->show_temp |= BIT(TDIE_BIT); /* show Tdie */ > data->temp_offset = entry->offset; > break; > } > -- > 2.25.1 >