Tdie is an offset calculation that should only be shown when temp_offset
is actually put into a table. This is useless to show for all CPU/APU.
Show it only when necessary.
Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx>
---
drivers/hwmon/k10temp.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 41d9c0c0a1f1..e8ec0e36fc3b 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -435,7 +435,6 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
} else if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) {
data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK;
data->read_tempreg = read_tempreg_nb_zen;
- data->show_temp |= BIT(TDIE_BIT); /* show Tdie */
data->is_zen = true;
switch (boot_cpu_data.x86_model) {
@@ -457,7 +456,6 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
} else if (boot_cpu_data.x86 == 0x19) {
data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK;
data->read_tempreg = read_tempreg_nb_zen;
- data->show_temp |= BIT(TDIE_BIT);
data->is_zen = true;
switch (boot_cpu_data.x86_model) {
@@ -478,6 +476,7 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (boot_cpu_data.x86 == entry->model &&
strstr(boot_cpu_data.x86_model_id, entry->id)) {
+ data->show_temp |= BIT(TDIE_BIT); /* show Tdie */
data->temp_offset = entry->offset;
break;
}
--
2.25.1
