[PATCH 2/3] hwmon: axi-fan-control: handle irqs in natural order

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The core will now start out of reset at boot as soon as clocking is
available. Hence, by the time we unmask the interrupts we already might
have some of them set. Thus, it's important to handle them in the
natural order the core generates them. Otherwise, we could process
'ADI_IRQ_SRC_PWM_CHANGED' before 'ADI_IRQ_SRC_TEMP_INCREASE' and
erroneously set 'update_tacho_params' to true.

Signed-off-by: Nuno Sá <nuno.sa@xxxxxxxxxx>
---
 drivers/hwmon/axi-fan-control.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/hwmon/axi-fan-control.c b/drivers/hwmon/axi-fan-control.c
index 901d1588234d..c898ad121dc7 100644
--- a/drivers/hwmon/axi-fan-control.c
+++ b/drivers/hwmon/axi-fan-control.c
@@ -283,18 +283,9 @@ static irqreturn_t axi_fan_control_irq_handler(int irq, void *data)
 	u32 irq_pending = axi_ioread(ADI_REG_IRQ_PENDING, ctl);
 	u32 clear_mask;
 
-	if (irq_pending & ADI_IRQ_SRC_NEW_MEASUR) {
-		if (ctl->update_tacho_params) {
-			u32 new_tach = axi_ioread(ADI_REG_TACH_MEASUR, ctl);
-
-			/* get 25% tolerance */
-			u32 tach_tol = DIV_ROUND_CLOSEST(new_tach * 25, 100);
-			/* set new tacho parameters */
-			axi_iowrite(new_tach, ADI_REG_TACH_PERIOD, ctl);
-			axi_iowrite(tach_tol, ADI_REG_TACH_TOLERANCE, ctl);
-			ctl->update_tacho_params = false;
-		}
-	}
+	if (irq_pending & ADI_IRQ_SRC_TEMP_INCREASE)
+		/* hardware requested a new pwm */
+		ctl->hw_pwm_req = true;
 
 	if (irq_pending & ADI_IRQ_SRC_PWM_CHANGED) {
 		/*
@@ -310,9 +301,18 @@ static irqreturn_t axi_fan_control_irq_handler(int irq, void *data)
 		}
 	}
 
-	if (irq_pending & ADI_IRQ_SRC_TEMP_INCREASE)
-		/* hardware requested a new pwm */
-		ctl->hw_pwm_req = true;
+	if (irq_pending & ADI_IRQ_SRC_NEW_MEASUR) {
+		if (ctl->update_tacho_params) {
+			u32 new_tach = axi_ioread(ADI_REG_TACH_MEASUR, ctl);
+			/* get 25% tolerance */
+			u32 tach_tol = DIV_ROUND_CLOSEST(new_tach * 25, 100);
+
+			/* set new tacho parameters */
+			axi_iowrite(new_tach, ADI_REG_TACH_PERIOD, ctl);
+			axi_iowrite(tach_tol, ADI_REG_TACH_TOLERANCE, ctl);
+			ctl->update_tacho_params = false;
+		}
+	}
 
 	if (irq_pending & ADI_IRQ_SRC_TACH_ERR)
 		ctl->fan_fault = 1;
-- 
2.32.0




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux