On Mon, Jul 12, 2021 at 05:04:44PM CDT, Iwona Winiarska wrote:
>Add peci-cputemp driver for Digital Thermal Sensor (DTS) thermal
>readings of the processor package and processor cores that are
>accessible via the PECI interface.
>
>The main use case for the driver (and PECI interface) is out-of-band
>management, where we're able to obtain the DTS readings from an external
>entity connected with PECI, e.g. BMC on server platforms.
>
>Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
>Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
>Signed-off-by: Iwona Winiarska <iwona.winiarska@xxxxxxxxx>
>Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
>---
> MAINTAINERS | 7 +
> drivers/hwmon/Kconfig | 2 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/peci/Kconfig | 18 ++
> drivers/hwmon/peci/Makefile | 5 +
> drivers/hwmon/peci/common.h | 46 ++++
> drivers/hwmon/peci/cputemp.c | 503 +++++++++++++++++++++++++++++++++++
> 7 files changed, 582 insertions(+)
> create mode 100644 drivers/hwmon/peci/Kconfig
> create mode 100644 drivers/hwmon/peci/Makefile
> create mode 100644 drivers/hwmon/peci/common.h
> create mode 100644 drivers/hwmon/peci/cputemp.c
>
>diff --git a/MAINTAINERS b/MAINTAINERS
>index f47b5f634293..35ba9e3646bd 100644
>--- a/MAINTAINERS
>+++ b/MAINTAINERS
>@@ -14504,6 +14504,13 @@ L: platform-driver-x86@xxxxxxxxxxxxxxx
> S: Maintained
> F: drivers/platform/x86/peaq-wmi.c
>
>+PECI HARDWARE MONITORING DRIVERS
>+M: Iwona Winiarska <iwona.winiarska@xxxxxxxxx>
>+R: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
>+L: linux-hwmon@xxxxxxxxxxxxxxx
>+S: Supported
>+F: drivers/hwmon/peci/
>+
> PECI SUBSYSTEM
> M: Iwona Winiarska <iwona.winiarska@xxxxxxxxx>
> R: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
>diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
>index e3675377bc5d..61c0e3404415 100644
>--- a/drivers/hwmon/Kconfig
>+++ b/drivers/hwmon/Kconfig
>@@ -1507,6 +1507,8 @@ config SENSORS_PCF8591
> These devices are hard to detect and rarely found on mainstream
> hardware. If unsure, say N.
>
>+source "drivers/hwmon/peci/Kconfig"
>+
> source "drivers/hwmon/pmbus/Kconfig"
>
> config SENSORS_PWM_FAN
>diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
>index d712c61c1f5e..f52331f212ed 100644
>--- a/drivers/hwmon/Makefile
>+++ b/drivers/hwmon/Makefile
>@@ -202,6 +202,7 @@ obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
> obj-$(CONFIG_SENSORS_XGENE) += xgene-hwmon.o
>
> obj-$(CONFIG_SENSORS_OCC) += occ/
>+obj-$(CONFIG_SENSORS_PECI) += peci/
> obj-$(CONFIG_PMBUS) += pmbus/
>
> ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG
>diff --git a/drivers/hwmon/peci/Kconfig b/drivers/hwmon/peci/Kconfig
>new file mode 100644
>index 000000000000..e10eed68d70a
>--- /dev/null
>+++ b/drivers/hwmon/peci/Kconfig
>@@ -0,0 +1,18 @@
>+# SPDX-License-Identifier: GPL-2.0-only
>+
>+config SENSORS_PECI_CPUTEMP
>+ tristate "PECI CPU temperature monitoring client"
>+ depends on PECI
>+ select SENSORS_PECI
>+ select PECI_CPU
>+ help
>+ If you say yes here you get support for the generic Intel PECI
>+ cputemp driver which provides Digital Thermal Sensor (DTS) thermal
>+ readings of the CPU package and CPU cores that are accessible via
>+ the processor PECI interface.
>+
>+ This driver can also be built as a module. If so, the module
>+ will be called peci-cputemp.
>+
>+config SENSORS_PECI
>+ tristate
>diff --git a/drivers/hwmon/peci/Makefile b/drivers/hwmon/peci/Makefile
>new file mode 100644
>index 000000000000..e8a0ada5ab1f
>--- /dev/null
>+++ b/drivers/hwmon/peci/Makefile
>@@ -0,0 +1,5 @@
>+# SPDX-License-Identifier: GPL-2.0-only
>+
>+peci-cputemp-y := cputemp.o
>+
>+obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o
>diff --git a/drivers/hwmon/peci/common.h b/drivers/hwmon/peci/common.h
>new file mode 100644
>index 000000000000..54580c100d06
>--- /dev/null
>+++ b/drivers/hwmon/peci/common.h
>@@ -0,0 +1,46 @@
>+/* SPDX-License-Identifier: GPL-2.0-only */
>+/* Copyright (c) 2021 Intel Corporation */
>+
>+#include <linux/types.h>
>+
>+#ifndef __PECI_HWMON_COMMON_H
>+#define __PECI_HWMON_COMMON_H
>+
>+#define UPDATE_INTERVAL_DEFAULT HZ
>+
>+/**
>+ * struct peci_sensor_data - PECI sensor information
>+ * @valid: flag to indicate the sensor value is valid
>+ * @value: sensor value in milli units
>+ * @last_updated: time of the last update in jiffies
>+ */
>+struct peci_sensor_data {
>+ unsigned int valid;
>From what I can see it looks like the 'valid' member here is strictly a
one-shot has-this-value-ever-been-set indicator, which seems a bit
wasteful to keep around forever post initialization; couldn't the same
information be inferred from checking last_updated != 0 or something?
>+ s32 value;
>+ unsigned long last_updated;
>+};
>+
>+/**
>+ * peci_sensor_need_update() - check whether sensor update is needed or not
>+ * @sensor: pointer to sensor data struct
>+ *
>+ * Return: true if update is needed, false if not.
>+ */
>+
>+static inline bool peci_sensor_need_update(struct peci_sensor_data *sensor)
>+{
>+ return !sensor->valid ||
>+ time_after(jiffies, sensor->last_updated + UPDATE_INTERVAL_DEFAULT);
>+}
>+
>+/**
>+ * peci_sensor_mark_updated() - mark the sensor is updated
>+ * @sensor: pointer to sensor data struct
>+ */
>+static inline void peci_sensor_mark_updated(struct peci_sensor_data *sensor)
>+{
>+ sensor->valid = 1;
>+ sensor->last_updated = jiffies;
>+}
>+
>+#endif /* __PECI_HWMON_COMMON_H */
>diff --git a/drivers/hwmon/peci/cputemp.c b/drivers/hwmon/peci/cputemp.c
>new file mode 100644
>index 000000000000..56a526471687
>--- /dev/null
>+++ b/drivers/hwmon/peci/cputemp.c
>@@ -0,0 +1,503 @@
>+// SPDX-License-Identifier: GPL-2.0-only
>+// Copyright (c) 2018-2021 Intel Corporation
>+
>+#include <linux/auxiliary_bus.h>
>+#include <linux/bitfield.h>
>+#include <linux/bitops.h>
>+#include <linux/hwmon.h>
>+#include <linux/jiffies.h>
>+#include <linux/module.h>
>+#include <linux/peci.h>
>+#include <linux/peci-cpu.h>
>+#include <linux/units.h>
>+#include <linux/x86/intel-family.h>
>+
>+#include "common.h"
>+
>+#define CORE_NUMS_MAX 64
>+
>+#define DEFAULT_CHANNEL_NUMS 5
DEFAULT_ seems like a slightly odd prefix for this (it's not something
that can really be overridden or anything); would BASE_ perhaps be a bit
more appropriate?
>+#define CORETEMP_CHANNEL_NUMS CORE_NUMS_MAX
>+#define CPUTEMP_CHANNEL_NUMS (DEFAULT_CHANNEL_NUMS + CORETEMP_CHANNEL_NUMS)
>+
>+#define TEMP_TARGET_FAN_TEMP_MASK GENMASK(15, 8)
>+#define TEMP_TARGET_REF_TEMP_MASK GENMASK(23, 16)
>+#define TEMP_TARGET_TJ_OFFSET_MASK GENMASK(29, 24)
>+
>+#define DTS_MARGIN_MASK GENMASK(15, 0)
>+#define PCS_MODULE_TEMP_MASK GENMASK(15, 0)
>+
>+#define DTS_FIXED_POINT_FRACTION 64
>+
>+struct resolved_cores_reg {
>+ u8 bus;
>+ u8 dev;
>+ u8 func;
>+ u8 offset;
>+};
>+
>+struct cpu_info {
>+ struct resolved_cores_reg *reg;
>+ u8 min_peci_revision;
As with the dimmtemp driver, min_peci_revision appears unused here,
though in this case if it were removed there'd only be one (pointer)
member left in struct cpu_info, so we could perhaps remove it as well
and then also a level of indirection in peci_cputemp_ids/cpu_{hsx,icx}
too?
>+};
>+
>+struct peci_cputemp {
>+ struct peci_device *peci_dev;
>+ struct device *dev;
>+ const char *name;
>+ const struct cpu_info *gen_info;
>+ struct {
>+ struct peci_sensor_data die;
>+ struct peci_sensor_data dts;
>+ struct peci_sensor_data tcontrol;
>+ struct peci_sensor_data tthrottle;
>+ struct peci_sensor_data tjmax;
>+ struct peci_sensor_data core[CORETEMP_CHANNEL_NUMS];
>+ } temp;
>+ const char **coretemp_label;
>+ DECLARE_BITMAP(core_mask, CORE_NUMS_MAX);
>+};
>+
>+enum cputemp_channels {
>+ channel_die,
>+ channel_dts,
>+ channel_tcontrol,
>+ channel_tthrottle,
>+ channel_tjmax,
>+ channel_core,
>+};
>+
>+static const char *cputemp_label[DEFAULT_CHANNEL_NUMS] = {
static const char * const cputemp_label? (That is, const pointer to
const char, rather than non-const pointer to const char.)
>+ "Die",
>+ "DTS",
>+ "Tcontrol",
>+ "Tthrottle",
>+ "Tjmax",
>+};
>+
>+static int get_temp_targets(struct peci_cputemp *priv)
>+{
>+ s32 tthrottle_offset, tcontrol_margin;
>+ u32 pcs;
>+ int ret;
>+
>+ /*
>+ * Just use only the tcontrol marker to determine if target values need
>+ * update.
>+ */
>+ if (!peci_sensor_need_update(&priv->temp.tcontrol))
>+ return 0;
>+
>+ ret = peci_pcs_read(priv->peci_dev, PECI_PCS_TEMP_TARGET, 0, &pcs);
>+ if (ret)
>+ return ret;
>+
>+ priv->temp.tjmax.value = FIELD_GET(TEMP_TARGET_REF_TEMP_MASK, pcs) * MILLIDEGREE_PER_DEGREE;
>+
>+ tcontrol_margin = FIELD_GET(TEMP_TARGET_FAN_TEMP_MASK, pcs);
>+ tcontrol_margin = sign_extend32(tcontrol_margin, 7) * MILLIDEGREE_PER_DEGREE;
>+ priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin;
>+
>+ tthrottle_offset = FIELD_GET(TEMP_TARGET_TJ_OFFSET_MASK, pcs) * MILLIDEGREE_PER_DEGREE;
>+ priv->temp.tthrottle.value = priv->temp.tjmax.value - tthrottle_offset;
>+
>+ peci_sensor_mark_updated(&priv->temp.tcontrol);
>+
>+ return 0;
>+}
>+
>+/*
>+ * Processors return a value of DTS reading in S10.6 fixed point format
>+ * (sign, 10 bits signed integer value, 6 bits fractional).
This parenthetical reads to me like it's describing 17 bits -- I'm not a
PECI expert, but from my reading of the (somewhat skimpy) docs I've got
on it I'd suggest a description more like "sign, 9-bit magnitude, 6-bit
fraction".
>+ * Error codes:
>+ * 0x8000: General sensor error
>+ * 0x8001: Reserved
>+ * 0x8002: Underflow on reading value
>+ * 0x8003-0x81ff: Reserved
>+ */
>+static bool dts_valid(s32 val)
>+{
>+ return val < 0x8000 || val > 0x81ff;
>+}
>+
>+static s32 dts_to_millidegree(s32 val)
>+{
>+ return sign_extend32(val, 15) * MILLIDEGREE_PER_DEGREE / DTS_FIXED_POINT_FRACTION;
>+}
>+
>+static int get_die_temp(struct peci_cputemp *priv)
>+{
>+ s16 temp;
>+ int ret;
>+
>+ if (!peci_sensor_need_update(&priv->temp.die))
>+ return 0;
>+
>+ ret = peci_temp_read(priv->peci_dev, &temp);
>+ if (ret)
>+ return ret;
>+
>+ if (!dts_valid(temp))
>+ return -EIO;
>+
>+ /* Note that the tjmax should be available before calling it */
>+ priv->temp.die.value = priv->temp.tjmax.value + dts_to_millidegree(temp);
>+
>+ peci_sensor_mark_updated(&priv->temp.die);
>+
>+ return 0;
>+}
>+
>+static int get_dts(struct peci_cputemp *priv)
>+{
>+ s32 dts_margin;
>+ u32 pcs;
>+ int ret;
>+
>+ if (!peci_sensor_need_update(&priv->temp.dts))
>+ return 0;
>+
>+ ret = peci_pcs_read(priv->peci_dev, PECI_PCS_THERMAL_MARGIN, 0, &pcs);
>+ if (ret)
>+ return ret;
>+
>+ dts_margin = FIELD_GET(DTS_MARGIN_MASK, pcs);
>+ if (!dts_valid(dts_margin))
>+ return -EIO;
>+
>+ /* Note that the tcontrol should be available before calling it */
>+ priv->temp.dts.value = priv->temp.tcontrol.value - dts_to_millidegree(dts_margin);
>+
>+ peci_sensor_mark_updated(&priv->temp.dts);
>+
>+ return 0;
>+}
>+
>+static int get_core_temp(struct peci_cputemp *priv, int core_index)
>+{
>+ s32 core_dts_margin;
>+ u32 pcs;
>+ int ret;
>+
>+ if (!peci_sensor_need_update(&priv->temp.core[core_index]))
>+ return 0;
>+
>+ ret = peci_pcs_read(priv->peci_dev, PECI_PCS_MODULE_TEMP, core_index, &pcs);
>+ if (ret)
>+ return ret;
>+
>+ core_dts_margin = FIELD_GET(PCS_MODULE_TEMP_MASK, pcs);
>+ if (!dts_valid(core_dts_margin))
>+ return -EIO;
>+
>+ /* Note that the tjmax should be available before calling it */
>+ priv->temp.core[core_index].value =
>+ priv->temp.tjmax.value + dts_to_millidegree(core_dts_margin);
>+
>+ peci_sensor_mark_updated(&priv->temp.core[core_index]);
>+
>+ return 0;
>+}
>+
>+static int cputemp_read_string(struct device *dev, enum hwmon_sensor_types type,
>+ u32 attr, int channel, const char **str)
>+{
>+ struct peci_cputemp *priv = dev_get_drvdata(dev);
>+
>+ if (attr != hwmon_temp_label)
>+ return -EOPNOTSUPP;
>+
>+ *str = channel < channel_core ?
>+ cputemp_label[channel] : priv->coretemp_label[channel - channel_core];
>+
>+ return 0;
>+}
>+
>+static int cputemp_read(struct device *dev, enum hwmon_sensor_types type,
>+ u32 attr, int channel, long *val)
>+{
>+ struct peci_cputemp *priv = dev_get_drvdata(dev);
>+ int ret, core_index;
>+
>+ ret = get_temp_targets(priv);
>+ if (ret)
>+ return ret;
>+
>+ switch (attr) {
>+ case hwmon_temp_input:
>+ switch (channel) {
>+ case channel_die:
>+ ret = get_die_temp(priv);
>+ if (ret)
>+ return ret;
>+
>+ *val = priv->temp.die.value;
>+ break;
>+ case channel_dts:
>+ ret = get_dts(priv);
>+ if (ret)
>+ return ret;
>+
>+ *val = priv->temp.dts.value;
>+ break;
>+ case channel_tcontrol:
>+ *val = priv->temp.tcontrol.value;
>+ break;
>+ case channel_tthrottle:
>+ *val = priv->temp.tthrottle.value;
>+ break;
>+ case channel_tjmax:
>+ *val = priv->temp.tjmax.value;
>+ break;
>+ default:
>+ core_index = channel - channel_core;
>+ ret = get_core_temp(priv, core_index);
>+ if (ret)
>+ return ret;
>+
>+ *val = priv->temp.core[core_index].value;
>+ break;
>+ }
>+ break;
>+ case hwmon_temp_max:
>+ *val = priv->temp.tcontrol.value;
>+ break;
>+ case hwmon_temp_crit:
>+ *val = priv->temp.tjmax.value;
>+ break;
>+ case hwmon_temp_crit_hyst:
>+ *val = priv->temp.tjmax.value - priv->temp.tcontrol.value;
>+ break;
>+ default:
>+ return -EOPNOTSUPP;
>+ }
>+
>+ return 0;
>+}
>+
>+static umode_t cputemp_is_visible(const void *data, enum hwmon_sensor_types type,
>+ u32 attr, int channel)
>+{
>+ const struct peci_cputemp *priv = data;
>+
>+ if (channel > CPUTEMP_CHANNEL_NUMS)
>+ return 0;
>+
>+ if (channel < channel_core)
>+ return 0444;
>+
>+ if (test_bit(channel - channel_core, priv->core_mask))
>+ return 0444;
>+
>+ return 0;
>+}
>+
>+static int init_core_mask(struct peci_cputemp *priv)
>+{
>+ struct peci_device *peci_dev = priv->peci_dev;
>+ struct resolved_cores_reg *reg = priv->gen_info->reg;
>+ u64 core_mask;
>+ u32 data;
>+ int ret;
>+
>+ /* Get the RESOLVED_CORES register value */
>+ switch (peci_dev->info.model) {
>+ case INTEL_FAM6_ICELAKE_X:
>+ case INTEL_FAM6_ICELAKE_D:
>+ ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,
>+ reg->func, reg->offset + 4, &data);
>+ if (ret)
>+ return ret;
>+
>+ core_mask = (u64)data << 32;
>+
>+ ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,
>+ reg->func, reg->offset, &data);
>+ if (ret)
>+ return ret;
>+
>+ core_mask |= data;
>+
>+ break;
>+ default:
>+ ret = peci_pci_local_read(peci_dev, reg->bus, reg->dev,
>+ reg->func, reg->offset, &data);
>+ if (ret)
>+ return ret;
>+
>+ core_mask = data;
>+
>+ break;
>+ }
>+
>+ if (!core_mask)
>+ return -EIO;
>+
>+ bitmap_from_u64(priv->core_mask, core_mask);
>+
>+ return 0;
>+}
>+
>+static int create_temp_label(struct peci_cputemp *priv)
>+{
>+ unsigned long core_max = find_last_bit(priv->core_mask, CORE_NUMS_MAX);
>+ int i;
>+
>+ priv->coretemp_label = devm_kzalloc(priv->dev, core_max * sizeof(char *), GFP_KERNEL);
>+ if (!priv->coretemp_label)
>+ return -ENOMEM;
>+
>+ for_each_set_bit(i, priv->core_mask, CORE_NUMS_MAX) {
>+ priv->coretemp_label[i] = devm_kasprintf(priv->dev, GFP_KERNEL, "Core %d", i);
>+ if (!priv->coretemp_label[i])
>+ return -ENOMEM;
>+ }
>+
>+ return 0;
>+}
>+
>+static void check_resolved_cores(struct peci_cputemp *priv)
>+{
>+ int ret;
>+
>+ ret = init_core_mask(priv);
>+ if (ret)
>+ return;
>+
>+ ret = create_temp_label(priv);
>+ if (ret)
>+ bitmap_zero(priv->core_mask, CORE_NUMS_MAX);
>+}
>+
>+static const struct hwmon_ops peci_cputemp_ops = {
>+ .is_visible = cputemp_is_visible,
>+ .read_string = cputemp_read_string,
>+ .read = cputemp_read,
>+};
>+
>+static const u32 peci_cputemp_temp_channel_config[] = {
>+ /* Die temperature */
>+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | HWMON_T_CRIT_HYST,
>+ /* DTS margin */
>+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | HWMON_T_CRIT_HYST,
>+ /* Tcontrol temperature */
>+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT,
>+ /* Tthrottle temperature */
>+ HWMON_T_LABEL | HWMON_T_INPUT,
>+ /* Tjmax temperature */
>+ HWMON_T_LABEL | HWMON_T_INPUT,
>+ /* Core temperature - for all core channels */
>+ [channel_core ... CPUTEMP_CHANNEL_NUMS - 1] = HWMON_T_LABEL | HWMON_T_INPUT,
>+ 0
>+};
>+
>+static const struct hwmon_channel_info peci_cputemp_temp_channel = {
>+ .type = hwmon_temp,
>+ .config = peci_cputemp_temp_channel_config,
>+};
>+
>+static const struct hwmon_channel_info *peci_cputemp_info[] = {
>+ &peci_cputemp_temp_channel,
>+ NULL
>+};
>+
>+static const struct hwmon_chip_info peci_cputemp_chip_info = {
>+ .ops = &peci_cputemp_ops,
>+ .info = peci_cputemp_info,
>+};
>+
>+static int peci_cputemp_probe(struct auxiliary_device *adev,
>+ const struct auxiliary_device_id *id)
>+{
>+ struct device *dev = &adev->dev;
>+ struct peci_device *peci_dev = to_peci_device(dev->parent);
>+ struct peci_cputemp *priv;
>+ struct device *hwmon_dev;
>+
>+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>+ if (!priv)
>+ return -ENOMEM;
>+
>+ priv->name = devm_kasprintf(dev, GFP_KERNEL, "peci_cputemp.cpu%d",
>+ peci_dev->info.socket_id);
>+ if (!priv->name)
>+ return -ENOMEM;
>+
>+ dev_set_drvdata(dev, priv);
>+ priv->dev = dev;
>+ priv->peci_dev = peci_dev;
>+ priv->gen_info = (const struct cpu_info *)id->driver_data;
>+
>+ check_resolved_cores(priv);
>+
>+ hwmon_dev = devm_hwmon_device_register_with_info(priv->dev, priv->name,
>+ priv, &peci_cputemp_chip_info, NULL);
>+
>+ return PTR_ERR_OR_ZERO(hwmon_dev);
>+}
>+
>+static struct resolved_cores_reg resolved_cores_reg_hsx = {
>+ .bus = 1,
>+ .dev = 30,
>+ .func = 3,
>+ .offset = 0xb4,
>+};
>+
>+static struct resolved_cores_reg resolved_cores_reg_icx = {
>+ .bus = 14,
>+ .dev = 30,
>+ .func = 3,
>+ .offset = 0xd0,
>+};
>+
>+static const struct cpu_info cpu_hsx = {
>+ .reg = &resolved_cores_reg_hsx,
>+ .min_peci_revision = 0x30,
>+};
>+
>+static const struct cpu_info cpu_icx = {
>+ .reg = &resolved_cores_reg_icx,
>+ .min_peci_revision = 0x40,
>+};
>+
>+static const struct auxiliary_device_id peci_cputemp_ids[] = {
>+ {
>+ .name = "peci_cpu.cputemp.hsx",
>+ .driver_data = (kernel_ulong_t)&cpu_hsx,
>+ },
>+ {
>+ .name = "peci_cpu.cputemp.bdx",
>+ .driver_data = (kernel_ulong_t)&cpu_hsx,
>+ },
>+ {
>+ .name = "peci_cpu.cputemp.bdxd",
>+ .driver_data = (kernel_ulong_t)&cpu_hsx,
>+ },
>+ {
>+ .name = "peci_cpu.cputemp.skx",
>+ .driver_data = (kernel_ulong_t)&cpu_hsx,
>+ },
>+ {
>+ .name = "peci_cpu.cputemp.icx",
>+ .driver_data = (kernel_ulong_t)&cpu_icx,
>+ },
>+ {
>+ .name = "peci_cpu.cputemp.icxd",
>+ .driver_data = (kernel_ulong_t)&cpu_icx,
>+ },
>+ { }
>+};
>+MODULE_DEVICE_TABLE(auxiliary, peci_cputemp_ids);
>+
>+static struct auxiliary_driver peci_cputemp_driver = {
>+ .probe = peci_cputemp_probe,
>+ .id_table = peci_cputemp_ids,
>+};
>+
>+module_auxiliary_driver(peci_cputemp_driver);
>+
>+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>");
>+MODULE_AUTHOR("Iwona Winiarska <iwona.winiarska@xxxxxxxxx>");
>+MODULE_DESCRIPTION("PECI cputemp driver");
>+MODULE_LICENSE("GPL");
>+MODULE_IMPORT_NS(PECI_CPU);
>--
>2.31.1
>
