From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx> Dependencies required for DA9063 HWMON support. Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@xxxxxxxxxxx> Moved temperature offset reading to hwmon driver. Signed-off-by: Vincent Pelletier <plr.vincent@xxxxxxxxx> --- Changes in v3: - moved temperature offset reading to hwmon driver Changes in v2: - registers.h changes moved from patch 2 Originally submitted by Steve Twiss in 2014: https://marc.info/?l=linux-kernel&m=139560864709852&w=2 include/linux/mfd/da9063/registers.h | 34 ++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/include/linux/mfd/da9063/registers.h b/include/linux/mfd/da9063/registers.h index 6e0f66a2e727..297631ddda39 100644 --- a/include/linux/mfd/da9063/registers.h +++ b/include/linux/mfd/da9063/registers.h @@ -512,6 +512,7 @@ /* DA9063_REG_GPIO_0_1 (addr=0x15) */ #define DA9063_GPIO0_PIN_MASK 0x03 +#define DA9063_GPIO0_PIN_MASK_SHIFT 0 #define DA9063_GPIO0_PIN_ADCIN1 0x00 #define DA9063_GPIO0_PIN_GPI 0x01 #define DA9063_GPIO0_PIN_GPO_OD 0x02 @@ -523,6 +524,7 @@ #define DA9063_GPIO0_TYPE_GPO_VDD_IO2 0x04 #define DA9063_GPIO0_NO_WAKEUP 0x08 #define DA9063_GPIO1_PIN_MASK 0x30 +#define DA9063_GPIO1_PIN_MASK_SHIFT 4 #define DA9063_GPIO1_PIN_ADCIN2_COMP 0x00 #define DA9063_GPIO1_PIN_GPI 0x10 #define DA9063_GPIO1_PIN_GPO_OD 0x20 @@ -536,6 +538,7 @@ /* DA9063_REG_GPIO_2_3 (addr=0x16) */ #define DA9063_GPIO2_PIN_MASK 0x03 +#define DA9063_GPIO2_PIN_MASK_SHIFT 0 #define DA9063_GPIO2_PIN_ADCIN3 0x00 #define DA9063_GPIO2_PIN_GPI 0x01 #define DA9063_GPIO2_PIN_GPO_PSS 0x02 @@ -851,6 +854,7 @@ #define DA9063_VSYS_VAL_BASE 0x00 /* DA9063_REG_ADC_RES_L (addr=0x37) */ +#define DA9063_ADC_RES_L_SHIFT 6 #define DA9063_ADC_RES_L_BITS 2 #define DA9063_ADC_RES_L_MASK 0xC0 @@ -1014,6 +1018,36 @@ #define DA9063_GPIO_DIM 0x80 #define DA9063_GPIO_PWM_MASK 0x7F +/* DA9063_REG_ADC_CFG (addr=0xC9) */ +#define DA9063_REG_ADCIN1_CUR_MASK 0x03 +#define DA9063_REG_ADCIN1_CUR_SHIFT 0 +#define DA9063_ADCIN1_CUR_1UA 0x00 +#define DA9063_ADCIN1_CUR_2UA 0x01 +#define DA9063_ADCIN1_CUR_10UA 0x02 +#define DA9063_ADCIN1_CUR_40UA 0x03 +#define DA9063_REG_ADCIN2_CUR_MASK 0x0C +#define DA9063_REG_ADCIN2_CUR_SHIFT 2 +#define DA9063_ADCIN2_CUR_1UA 0x00 +#define DA9063_ADCIN2_CUR_2UA 0x01 +#define DA9063_ADCIN2_CUR_10UA 0x02 +#define DA9063_ADCIN2_CUR_40UA 0x03 +#define DA9063_REG_ADCIN3_CUR_MASK 0x10 +#define DA9063_REG_ADCIN3_CUR_SHIFT 4 +#define DA9063_ADCIN3_CUR_10UA 0x00 +#define DA9063_ADCIN3_CUR_40UA 0x01 +#define DA9063_REG_ADCIN1_DEB_MASK 0x20 +#define DA9063_REG_ADCIN1_DEB_SHIFT 5 +#define DA9063_ADCIN1_DEB_OFF 0x00 +#define DA9063_ADCIN1_DEB_ON 0x01 +#define DA9063_REG_ADCIN2_DEB_MASK 0x40 +#define DA9063_REG_ADCIN2_DEB_SHIFT 6 +#define DA9063_ADCIN2_DEB_OFF 0x00 +#define DA9063_ADCIN2_DEB_ON 0x01 +#define DA9063_REG_ADCIN3_DEB_MASK 0x80 +#define DA9063_REG_ADCIN3_DEB_SHIFT 7 +#define DA9063_ADCIN3_DEB_OFF 0x00 +#define DA9063_ADCIN3_DEB_ON 0x01 + /* DA9063_REG_CONFIG_H (addr=0x10D) */ #define DA9063_PWM_CLK_MASK 0x01 #define DA9063_PWM_CLK_PWM2MHZ 0x00 -- 2.32.0
