On Wed, Jun 23, 2021 at 07:22:31AM +0300, Dmitry Osipenko wrote:
> Support set_trips() callback of thermal device ops. This allows HWMON
> device to operatively notify thermal core about temperature changes, which
> is very handy to have in a case where HWMON sensor is used by CPU thermal
> zone that performs passive cooling and emergency shutdown on overheat.
> Thermal core will be able to react faster to temperature changes.
>
> The set_trips() callback is entirely optional. If HWMON sensor doesn't
> support setting thermal trips, then the callback is a NO-OP. The dummy
> callback has no effect on the thermal core. The temperature trips are
> either complement the temperature polling mechanism of thermal core or
> replace the polling if sensor can set the trips and polling is disabled
> by a particular device in a device-tree.
>
> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
Applied.
Thanks,
Guenter
> ---
> drivers/hwmon/hwmon.c | 36 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
> index fd47ab4e6892..8d3b1dae31df 100644
> --- a/drivers/hwmon/hwmon.c
> +++ b/drivers/hwmon/hwmon.c
> @@ -153,8 +153,44 @@ static int hwmon_thermal_get_temp(void *data, int *temp)
> return 0;
> }
>
> +static int hwmon_thermal_set_trips(void *data, int low, int high)
> +{
> + struct hwmon_thermal_data *tdata = data;
> + struct hwmon_device *hwdev = to_hwmon_device(tdata->dev);
> + const struct hwmon_chip_info *chip = hwdev->chip;
> + const struct hwmon_channel_info **info = chip->info;
> + unsigned int i;
> + int err;
> +
> + if (!chip->ops->write)
> + return 0;
> +
> + for (i = 0; info[i] && info[i]->type != hwmon_temp; i++)
> + continue;
> +
> + if (!info[i])
> + return 0;
> +
> + if (info[i]->config[tdata->index] & HWMON_T_MIN) {
> + err = chip->ops->write(tdata->dev, hwmon_temp,
> + hwmon_temp_min, tdata->index, low);
> + if (err && err != -EOPNOTSUPP)
> + return err;
> + }
> +
> + if (info[i]->config[tdata->index] & HWMON_T_MAX) {
> + err = chip->ops->write(tdata->dev, hwmon_temp,
> + hwmon_temp_max, tdata->index, high);
> + if (err && err != -EOPNOTSUPP)
> + return err;
> + }
> +
> + return 0;
> +}
> +
> static const struct thermal_zone_of_device_ops hwmon_thermal_ops = {
> .get_temp = hwmon_thermal_get_temp,
> + .set_trips = hwmon_thermal_set_trips,
> };
>
> static void hwmon_thermal_remove_sensor(void *data)
