On Tue, Jun 22, 2021 at 09:50:11AM +0800, ainux.wang@xxxxxxxxx wrote:
> From: "Ainux.Wang" <ainux.wang@xxxxxxxxx>
>
> Add support for MP2949A device from Monolithic Power Systems, Inc. (MPS).
> This is a triple-loop, digital, multi-phase controller.
> This device:
> - Supports up to three power rail.
> - Provides 6 pulse-width modulations (PWMs), and can be configured up
> to 6-phase operation for Rail A , up to 2-phase operation for Rail B
> and up to 1-phase operation for Rail C.
> - The PMBus registers are distributed into three pages: Page 0, Page 1,
> Page 2. Page 0 contains the registers for Rail A and most of the common
> settings for all of the rails. Page 1 contains register information for
> Rail B. Page 2 contains register information for Rail C.
> - The MP2949A supports both 5mV VID step and 10mv VID step for IMVP8 and
> IMVP9.
>
> Signed-off-by: Ainux.Wang <ainux.wang@xxxxxxxxx>
>
> v3:
> - Added change log here.
> - Errors in the document have been modified.
> - Fixed PMBUS_VOUT_MODE to MP2949A_MFR_VR_CONFIG.
> - Removed unnecessary vout_params and empty line.
>
> v2:
> - Reference has been added to Documentation/hwmon/index.rst.
> - Droped 'vendor'.
> - Removed change codes of the PMBus core and added mp2949a_identify()
> and mp2949a_read_byte_data() to this driver.
>
> v1:
> - Add support for MPS MP2949A.
> ---
> Documentation/hwmon/index.rst | 1 +
> Documentation/hwmon/mp2949a.rst | 44 ++++++++++++
> drivers/hwmon/pmbus/Kconfig | 9 +++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/mp2949a.c | 118 ++++++++++++++++++++++++++++++++
> 5 files changed, 173 insertions(+)
> create mode 100644 Documentation/hwmon/mp2949a.rst
> create mode 100644 drivers/hwmon/pmbus/mp2949a.c
>
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 9ed60fa84cbe..56aac3b1678d 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -137,6 +137,7 @@ Hardware Monitoring Kernel Drivers
> mcp3021
> menf21bmc
> mlxreg-fan
> + mp2949a
> mp2975
> nct6683
> nct6775
> diff --git a/Documentation/hwmon/mp2949a.rst b/Documentation/hwmon/mp2949a.rst
> new file mode 100644
> index 000000000000..0235dec70f63
> --- /dev/null
> +++ b/Documentation/hwmon/mp2949a.rst
> @@ -0,0 +1,44 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Kernel driver mp2949a
> +====================
> +
> +Supported chips:
> +
> + * MPS MP2949A
> +
> + Prefix: 'mp2949a'
> +
> +Author:
> +
> + Ainux Wang <ainux.wang@xxxxxxxxx>
> +
> +Description
> +-----------
> +
> +This driver implements support for Monolithic Power Systems, Inc. (MPS)
> +triple-loop, digital, multi-phase controller MP2949A.
> +
> +This device:
> +
> +- Supports up to three power rail.
> +- Provides 6 pulse-width modulations (PWMs), and can be configured for
> + to 6-phase operation for Rail A , up to 2-phase operation for Rail B,
> + and up to 1-phase operation for Rail C.
> +- The PMBus registers are distributed into three pages: Page 0, Page 1,
> + Page 2. Page 0 contains the registers for Rail A and most of the common
> + settings for all of the rails. Page 1 contains register information for
> + Rail B. Page 2 contains register information for Rail C.
> +- The MP2949A supports both 5mV VID step and 10mv VID step for IMVP8 and
> + IMVP9.
> +
> +Device supports:
> +
> +- SVID interface.
> +- PMBus rev 1.2 interface.
> +
> +Device supports direct format for reading output power.
> +Device supports linear format for reading input voltage, output current,
> +and temperature.
> +Device supports VID for reading output voltage.
> +The below VID modes are supported: VR12, VR13, IMVP8, IMVP9.
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 37a5c39784fa..b1344b265976 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -248,6 +248,15 @@ config SENSORS_MAX8688
> This driver can also be built as a module. If so, the module will
> be called max8688.
>
> +config SENSORS_MP2949A
> + tristate "MPS MP2949A"
> + help
> + If you say yes here you get hardware monitoring support for MPS
> + MP2949A Triple Loop Digital Multi-Phase Controller.
> +
> + This driver can also be built as a module. If so, the module will
> + be called mp2949a.
> +
> config SENSORS_MP2975
> tristate "MPS MP2975"
> help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index f8dcc27cd56a..bfb55ab12da1 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
> obj-$(CONFIG_SENSORS_MAX31785) += max31785.o
> obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
> obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
> +obj-$(CONFIG_SENSORS_MP2949A) += mp2949a.o
> obj-$(CONFIG_SENSORS_MP2975) += mp2975.o
> obj-$(CONFIG_SENSORS_PM6764TR) += pm6764tr.o
> obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o
> diff --git a/drivers/hwmon/pmbus/mp2949a.c b/drivers/hwmon/pmbus/mp2949a.c
> new file mode 100644
> index 000000000000..744c88b8ebca
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/mp2949a.c
> @@ -0,0 +1,118 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Hardware monitoring driver for Monolithic Power Systems MP2949A
> + *
> + * Copyright (c) 2021 Lemote Technologies. All rights reserved.
> + * Copyright (c) 2021 Ainux <ainux.wang@xxxxxxxxx>
> + */
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include "pmbus.h"
> +
> +#define MP2949A_PAGE_NUM 3
> +
> +#define MP2949A_MFR_VR_CONFIG 0xE4
> +
> +static int mp2949a_read_byte_data(struct i2c_client *client, int page, int reg)
> +{
> + switch (reg) {
> + case PMBUS_VOUT_MODE:
> + /*
> + * This chip do not support the VOUT_MODE command.
> + * There is not VOUT_MODE command in MP2949A datasheet P29~P31.
> + * So there is a EINVAL in here.
> + */
> + return -EINVAL;
This is not a reason to add this code. The PMBus core handles this situation.
Please explain why this is needed. "The chip does not support this command"
is not a reason.
> + default:
> + return -ENODATA;
> + }
> +}
> +
> +static int mp2949a_identify(struct i2c_client *client,
> + struct pmbus_driver_info *info)
> +{
> + int i, ret;
> +
> + for (i = 0; i < MP2949A_PAGE_NUM; i++) {
> + ret = pmbus_read_byte_data(client, i, MP2949A_MFR_VR_CONFIG);
> + if (ret < 0)
> + return ret;
> +
> + /*
> + * Rail A bit 5, Rail B bit 4, Rail C bit 3.
> + * 1'b1: 5mV (vr12/imvp8)
> + * 1'b0: 10mv (imvp9)
> + */
> + info->vrm_version[i] = (ret & ~BIT(5-i)) ? vr12 : imvp9;
Space before and after '-'.
Also, why ~ ? This evaluates all bits except the target bit.
> + }
> +
> + return 0;
> +}
> +
> +static struct pmbus_driver_info mp2949a_info = {
> + .pages = MP2949A_PAGE_NUM,
> + .format[PSC_VOLTAGE_IN] = linear,
> + .format[PSC_VOLTAGE_OUT] = vid,
> + .format[PSC_CURRENT_OUT] = linear,
> + .format[PSC_TEMPERATURE] = linear,
> + .format[PSC_POWER] = direct,
> + .m[PSC_POWER] = 1,
> + .b[PSC_POWER] = 0,
> + .R[PSC_POWER] = 0,
> + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
> + PMBUS_HAVE_TEMP | PMBUS_HAVE_POUT,
> + .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
> + PMBUS_HAVE_POUT,
> + .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
> + PMBUS_HAVE_POUT,
> + .identify = mp2949a_identify,
> + .read_byte_data = mp2949a_read_byte_data,
> +};
> +
> +static int mp2949a_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct pmbus_driver_info *info;
> +
> + info = devm_kmemdup(&client->dev, &mp2949a_info, sizeof(*info),
> + GFP_KERNEL);
> + if (!info)
> + return -ENOMEM;
> +
> + return pmbus_do_probe(client, info);
> +}
> +
> +static const struct i2c_device_id mp2949a_id[] = {
> + {"mp2949a", 0},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, mp2949a_id);
> +
> +static const struct of_device_id mp2949a_of_match[] = {
> + {.compatible = "mps,mp2949a"},
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, mp2949a_of_match);
> +
> +static struct i2c_driver mp2949a_driver = {
> + .driver = {
> + .name = "mp2949a",
> + .of_match_table = of_match_ptr(mp2949a_of_match),
> + },
> + .probe = mp2949a_probe,
> + .id_table = mp2949a_id,
> +};
> +
> +module_i2c_driver(mp2949a_driver);
> +
> +MODULE_AUTHOR("Ainux <ainux.wang@xxxxxxxxx>");
> +MODULE_DESCRIPTION("PMBus driver for Monolithic Power Systems MP2949A");
> +MODULE_LICENSE("GPL");
> --
> 2.18.1
>
