The scpi hwmon shows the sub-zero temperature in an unsigned integer, which would confuse the users when the machine works in low temperature environment. This shows the sub-zero temperature in an signed value and users can get it properly from sensors. Signed-off-by: Riwen Lu <luriwen@xxxxxxxxxx> Tested-by: Xin Chen <chenxin@xxxxxxxxxx> --- Changes since v1: - Add judgment for sensor->info.class. If it is TEMPERATURE situation, return the sensor value as a signed value, otherwise return it as a unsigned value. Changes since v2: - Add a typecast u64 to s64 when it is a temperature value. - Add a comment ahead of the if statement. - Remove the unnecessary 'else' statement. --- drivers/hwmon/scpi-hwmon.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c index 25aac40f2764..919877970ae3 100644 --- a/drivers/hwmon/scpi-hwmon.c +++ b/drivers/hwmon/scpi-hwmon.c @@ -99,6 +99,15 @@ scpi_show_sensor(struct device *dev, struct device_attribute *attr, char *buf) scpi_scale_reading(&value, sensor); + /* + * Temperature sensor values are treated as signed values based on + * observation even though that is not explicitly specified, and + * because an unsigned u64 temperature does not really make practical + * sense especially when the temperature is below zero degrees Celsius. + */ + if (sensor->info.class == TEMPERATURE) + return sprintf(buf, "%lld\n", (s64)value); + return sprintf(buf, "%llu\n", value); } -- 2.25.1 No virus found Checked by Hillstone Network AntiVirus
