Re: [PATCH] hwmon:q54sj108a2: the PMBUS_MFR_ID is actually 6 chars instead of 5

[Guenter Roeck <linux@xxxxxxxxxxxx>]

On 5/17/21 3:32 PM, Chu Lin wrote:
> On Mon, May 17, 2021 at 3:28 PM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
> > On 5/17/21 3:26 PM, Chu Lin wrote:
> > > The PMBUS_MFR_ID block is actually 6 chars for q54sj108a2.
> > > /sys/bus/i2c/drivers/q54sj108a2_test# iotools smbus_read8 $BUS $ADDR 0x99
> > > 0x06
> >
> > What is the 6th character ? Should it be checked as well ?
> The 6th char is \0. Do you suggest we check that as well?
No, that would be a bit pointless. I'll apply the patch.

Thanks,
Guenter


> Thanks,
> Chu
>
> > > Tested: Devices are able to bind to the q54sj108a2 driver successfully.
> > >
> > > Signed-off-by: Chu Lin <linchuyuan@xxxxxxxxxx>
> > > ---
> > >    drivers/hwmon/pmbus/q54sj108a2.c | 2 +-
> > >    1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/hwmon/pmbus/q54sj108a2.c b/drivers/hwmon/pmbus/q54sj108a2.c
> > > index aec512766c31..0976268b2670 100644
> > > --- a/drivers/hwmon/pmbus/q54sj108a2.c
> > > +++ b/drivers/hwmon/pmbus/q54sj108a2.c
> > > @@ -299,7 +299,7 @@ static int q54sj108a2_probe(struct i2c_client *client)
> > >                dev_err(&client->dev, "Failed to read Manufacturer ID\n");
> > >                return ret;
> > >        }
> > > -     if (ret != 5 || strncmp(buf, "DELTA", 5)) {
> > > +     if (ret != 6 || strncmp(buf, "DELTA", 5)) {
> > >                buf[ret] = '\0';
> > >                dev_err(dev, "Unsupported Manufacturer ID '%s'\n", buf);
> > >                return -ENODEV;