Add a devicetree binding to optionally force a different IIO channel type. This is useful in cases where ADC channels are connected to a circuit that represent another unit such as a temperature or a current. `channel-types` was chosen instead of `io-channel-types` as this is not part of the iio consumer bindings. In the current form, this patch does what it's intended to do: change the unit displayed by `sensors`, but feels like the wrong way to address the problem. Would it be possible to force the type of different IIO channels for this kind of use case with a devicetree binding from the IIO subsystem? It would be convenient to do it within the IIO subsystem to have the right unit there too. Thanks for your time, Liam Liam Beguin (2): hwmon: (iio_hwmon) optionally force iio channel type dt-bindings: hwmon: add iio-hwmon bindings .../devicetree/bindings/hwmon/iio-hwmon.yaml | 41 +++++++++++++++++++ drivers/hwmon/iio_hwmon.c | 2 + 2 files changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml base-commit: 9f4ad9e425a1d3b6a34617b8ea226d56a119a717 -- 2.30.1.489.g328c10930387
