I didn't properly test the driver for YH-5151E, so it was completely
broken. Firstly, the log/real mapping was incorrect in one case.
Secondly, PMBus specifies that output voltages should be in the linear16
encoding. However, the YH-5151E is non-compliant and uses linear11.
YM-2151E isn't affected by this. Fix this by converting the values
inside the read functions. linear16 gets the exponent from the VOUT_MODE
command. The device doesn't support it, so I have to manually supply the
value for it.
Both supported devices have now been tested to report correct vout
values.
Fixes: 1734b4135a62 ("hwmon: Add driver for fsp-3y PSUs and PDUs")
Signed-off-by: Václav Kubernát <kubernat@xxxxxxxxx>
---
drivers/hwmon/pmbus/fsp-3y.c | 27 +++++++++++++++++++++++++--
1 file changed, 25 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/pmbus/fsp-3y.c b/drivers/hwmon/pmbus/fsp-3y.c
index 564649e87e34..655690dde4d7 100644
--- a/drivers/hwmon/pmbus/fsp-3y.c
+++ b/drivers/hwmon/pmbus/fsp-3y.c
@@ -57,7 +57,7 @@ static int page_log_to_page_real(int page_log, enum chips chip)
case YH5151E_PAGE_12V_LOG:
return YH5151E_PAGE_12V_REAL;
case YH5151E_PAGE_5V_LOG:
- return YH5151E_PAGE_5V_LOG;
+ return YH5151E_PAGE_5V_REAL;
case YH5151E_PAGE_3V3_LOG:
return YH5151E_PAGE_3V3_REAL;
}
@@ -103,8 +103,18 @@ static int set_page(struct i2c_client *client, int page_log)
static int fsp3y_read_byte_data(struct i2c_client *client, int page, int reg)
{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct fsp3y_data *data = to_fsp3y_data(info);
int rv;
+ /*
+ * YH5151-E outputs vout in linear11. The conversion is done when
+ * reading. Here, we have to inject pmbus_core with the correct
+ * exponent (it is -6).
+ */
+ if (data->chip == yh5151e && reg == PMBUS_VOUT_MODE)
+ return 0x1A;
+
rv = set_page(client, page);
if (rv < 0)
return rv;
@@ -114,6 +124,8 @@ static int fsp3y_read_byte_data(struct i2c_client *client, int page, int reg)
static int fsp3y_read_word_data(struct i2c_client *client, int page, int phase, int reg)
{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct fsp3y_data *data = to_fsp3y_data(info);
int rv;
/*
@@ -144,7 +156,18 @@ static int fsp3y_read_word_data(struct i2c_client *client, int page, int phase,
if (rv < 0)
return rv;
- return i2c_smbus_read_word_data(client, reg);
+ rv = i2c_smbus_read_word_data(client, reg);
+ if (rv < 0)
+ return rv;
+
+ /*
+ * YH-5151E is non-compliant and outputs output voltages in linear11
+ * instead of linear16.
+ */
+ if (data->chip == yh5151e && reg == PMBUS_READ_VOUT)
+ rv = sign_extend32(rv, 10) & 0xffff;
+
+ return rv;
}
struct pmbus_driver_info fsp3y_info[] = {
--
2.31.1
