On Fri, 9 Apr 2021, Wu, Hao wrote:
On Fri, Apr 09, 2021 at 12:02:47PM +0800, Wu, Hao wrote:
+
+static void dfl_spi_altera_remove(struct dfl_device *dfl_dev)
+{
+struct dfl_altera_spi *aspi = dev_get_drvdata(&dfl_dev->dev);
+
+platform_device_unregister(aspi->altr_spi);
+}
+
+#define FME_FEATURE_ID_MAX10_SPI 0xe
+
+static const struct dfl_device_id dfl_spi_altera_ids[] = {
+{ FME_ID, FME_FEATURE_ID_MAX10_SPI },
+{ }
+};
Maybe you can extend the Altera SPI driver with this part?
The file, drivers/spi/spi-altera.c, already has platform MODULE_
related
code. Wouldn't moving this code to that file produce conflicts?
I've seen other drivers support multiple busses, so it should be
possible, there might be nuances I'm missing in my brief look at this,
though.
I think one of them would be MODULE_DEVICE_TABLE(platform, ...)
and the other one MODULE_DEVICE_TABLE(dfl, ...)
See drivers/i2c/busses/i2c-designware-platdrv.c for an example
(though
they might be guarding against what you describe with CONFIG_OF vs
CONFIG_ACPI)
If that doesn't work we could split it up into
altera-spi-plat.c and altera-spi-dfl.c and altera-spi-core.c
or something of that sort?
My point being, now that we have a bus, let's use it and develop
drivers
according to the Linux device model where possible :)
Agree. This does make sense from my side too. DFL core provides the
mechanism
to enumerate different IPs on FPGA, but each function driver needs to
go
to
related subsystem for review. : )
I understand that for FPGA case, it may have some additional logics for
specific
purposes based on common altera spi master IP, then additional code
for
I'm wondering if the additional logics are extensions for common spi-
altera.
Like
the
SPI_CORE_PARAMETER register, it is not within the register space of
spi-altera,
| | +-------------+
|DFL|------| +--------+ |
|BUS| | |SPI CORE| |
| | | |PARAM | |
| | | +--------+ |
| | | |
| | | +--------+ | +-------+
| |Indirect| | |spi |
| |access +--+---|altera |
| |master | | +-------+
| +--------+ |
+-------------+
a specific product still can be put into altera-spi-xxxx.c or altera-spi-dfl-
xxxx.c
So is it proper we integrate this feature into spi-altera? Previously
we have merged the dfl-n3000-nios, its spi part is very similar as
this driver. The dfl-n3000-nios make the spi-altera as a sub device.
Could we borrow the idea, or could we just integrate this driver in
dfl-n3000-nios?
Looks like those are enhancements of the IP. They can be applied even
I don't think the extra registers are the enhancement of the IP. They
are not part of the IP because they are not within the IP's register
space. They are like some external way of describing the IP like
Devicetree or ACPI.
Why adding new registers can't be consider as enhancement, those
changes serve the original IP and make it better, right? small mmio
footprint and parameter registers?
other buses are used, not only for DFL, like PCI device or platform device,
right? then why not put related code together with the original IP?
The code of devicetree or ACPI parsing are integrated in the IP drivers,
but for this case, it may not be proper for now, cause this style is not
formally introduced by any standard. IP specific parameters description
are not within the scope of DFL now.
Not sure if I get your point, but it's possible that we add some enhancements
to one IP then driver could be simplified and doesn't need devicetree any more.
For sure, it's IP specific thing, not the scope of DFL.
Then things become this: extension to IP to allow this IP to be used without
device tree, so that this IP can be used in DFL or PCI or other buses without
device tree?
It's good to extend an IP, but it needs a published SPEC and stable
register interfaces. For now, the spi-altera driver conforms to the
"SPI Core" chapter of the following spec:
https://www.intel.com/content/www/us/en/programmable/documentation/sf
o1400787952932.html
There is no info about the core parameter register and this specific
indirect access bus. That's why I don't see these additional parts as
the enhancements to spi-altera. This DFL feature is like a wrapper for
the spi-altera sub device.
It really doesn't matter, even if you consider this as an new IP, it's still a SPI
Master, it's driver still need to be reviewed in drivers/spi subsystem. The
worst case is that we need to write a new spi-xxx.c driver, that's it.
From DFL part, DFL only can enumerate the common hardware resources,
but no good way to help thing like this, specific IP parameters (which handle
by devicetree in platform driver). So for some IPs , they still need some
extensions to avoid such dependency (on device tree for parameters). I guess
we may see more similar cases in the future.
Anyway, I think we reached agreement that for device drivers on DFL bus, it
needs to be reviewed in its own subsystem. : )
Yes, I agree that device drivers on the DFL bus should go in the
appropriate the directory of the appropriate framework. As Moritz has
pointed out there are already examples bus specific driver code, for
multiple buses, being the driver framework directory (e.g. Designware
I2C).
In this particular case, the Device Feature is wraps a particular
instantiation of an Altera SPI Master controller. As Yilun pointed out, this
wrapper has a SPI_CORE_PARAMETER register which contains the values
of all the configuration parameters of the Altera SPI Master IP block.
This kind of information would also be included in a Device Tree
description of the instantiation. The Device Feature also implements
indirect register access to the actual registers of the Altera SPI Master
that provides a bridge from the PCIe bus to the Avalon Slave containing
the registers of the Altera SPI Master.
Given the Device Feature wraps an Altera SPI Master, it might still make
sense for the DFL driver to instantiate a sub driver instance for the
Altera SPI Master. I will resubmit the current patches with
drivers/fpga/dfl-spi-altera.c moved to drivers/spi/spi-altera-dfl.c for
feedback from the SPI maintainers and continue investigating collapsing
the DFL driver and the platform sub-driver into a single DFL driver. My
first attempt did not go well.
Matthew
directory of the app >
Thanks
Hao
Thanks
Yilun
