Re: [PATCH] lm63: Added thermal zone support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/5/21 5:55 AM, Azat Gismatov wrote:
> There are target systems where temperature sensor in the lm63
> is not the only temperature sensor in the system used to make
> thermal decisions. For example temperature sensors aren't
> connected to the lm63 (sensors are part of CPU and supported
> by own linux driver). 

The last sentence above can be removed. Or replace it all with
something like

"On some systems, temperature sensors not connected to the LM63
are used to make thermal decisions."

  So automatic fan control by the lm63 chip
> doesn't work for that systems.
> Using of thermal zone is much more convenient for embedded
> systems, than fan-control, or any other userspace software,
> because It allow to get smaller software footprint. Also with
> thermal zone we can store all cooling settings in devicetree,
> which is easier to maintain for embedded systems, than some
> userspace software.
> Added support to use manual pwm mode by  property  in device
> tree "#pwm-cells" (#pwm-cells = <2>). This property checkes

checks

> the presence of a pwm chip. If the property is set in the
> device tree, we will use the manual pwm mode by default. From
> the user mode it will not be possible to change automatical

change to automatic mode

> mode in the sysfs attributes. So pwm_chip_add () is used. In
> the device tree lable pwm_fan is used as a cooling device,

label

> it has a "pwms" property in description which is a link to
> the pwm device label. Driver pwm-fan registers thermal_zone
> cooling device.
> Example lm96163, pwm-fan device tree:
> pwm: lm96163@4c {
> 	compatible = "national,lm96163";
> 	reg = <0x4c>;
> 	#pwm-cells = <2>;
> 	/* 0 - one sensor, 1 - many sensors */
> 	#thermal-sensor-cells = <1>;
> };

This would need to be documented.

> fan: pwm_fan {
> 	compatible = "pwm-fan";
> 	/* arg 0 - pwm chip; arg 1 - pwm_id; arg 2 - period*/
> 	pwms = <&pwm 0 100>;
> 	#cooling-cells = <2>;
> 	cooling-levels = <0 25 128 255>;
> };
> 

This seems like an odd and unusual way to register a cooling device,
and it doesn't really explain why the lm63 driver doesn't register
itself as cooling device directly. This is true even more since it
requires that both CONFIG_PWM _and_ SENSORS_PWM_FAN have to be enabled,
which directly conflicts with the notion of limiting code size.
I don't see a technical reason for the current implementation.

Either case, new properties and their use needs to be documented in
Documentation/devicetree/bindings/hwmon/lm63.yaml.

> Cc: Jean Delvare <jdelvare@xxxxxxxx>
> Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
> Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
> Cc: linux-hwmon@xxxxxxxxxxxxxxx
> Signed-off-by: Azat Gismatov <gismatov.az@xxxxxxx>

Is that a new submission or a resubmit or a new version of a previous
patch ? I can't tell. Please explain. If it is a new version of a
previous patch, please version your patches and provide change logs.

> ---
>  drivers/hwmon/lm63.c | 121 ++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 120 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
> index 50f67265c71d..7d685cc4c0bc 100644
> --- a/drivers/hwmon/lm63.c
> +++ b/drivers/hwmon/lm63.c
> @@ -34,7 +34,9 @@
>  #include <linux/err.h>
>  #include <linux/mutex.h>
>  #include <linux/of_device.h>
> +#include <linux/pwm.h>
>  #include <linux/sysfs.h>
> +#include <linux/thermal.h>
>  #include <linux/types.h>
>  
>  /*
> @@ -97,6 +99,8 @@ static const unsigned short normal_i2c[] = { 0x18, 0x4c, 0x4e, I2C_CLIENT_END };
>  #define LM63_MAX_CONVRATE_HZ		32
>  #define LM96163_MAX_CONVRATE_HZ		26
>  
> +#define MAX_SENSORS	2
> +
>  /*
>   * Conversions and various macros
>   * For tachometer counts, the LM63 uses 16-bit values.
> @@ -131,6 +135,12 @@ static const unsigned short normal_i2c[] = { 0x18, 0x4c, 0x4e, I2C_CLIENT_END };
>  
>  enum chips { lm63, lm64, lm96163 };
>  
> +struct lm63_thermal_sensor {
> +	struct lm63_data *data;

This should not be needed. Something like

#define to_lm63_data(s, i)     container_of((s), struct lm63_data, thermal_sensor[i])

and

struct lm63_data *lm63_data = to_lm63_data(thermal_sensor,
                                           thermal_sensor->sensor_id);

should do.

> +	struct thermal_zone_device *tz;
> +	unsigned int sensor_id;
> +};
> +
>  /*
>   * Client data (each client gets its own)
>   */
> @@ -173,8 +183,15 @@ struct lm63_data {
>  	bool lut_temp_highres;
>  	bool remote_unsigned; /* true if unsigned remote upper limits */
>  	bool trutherm;
> +	struct pwm_chip chip;
> +	struct lm63_thermal_sensor thermal_sensor[MAX_SENSORS];
>  };
>  
> +static inline struct lm63_data *to_pwm(struct pwm_chip *chip)
> +{
> +	return container_of(chip, struct lm63_data, chip);
> +}
> +
>  static inline int temp8_from_reg(struct lm63_data *data, int nr)
>  {
>  	if (data->remote_unsigned)
> @@ -421,6 +438,9 @@ static ssize_t pwm1_enable_store(struct device *dev,
>  	unsigned long val;
>  	int err;
>  
> +	if (of_get_property(dev->of_node, "#pwm-cells", NULL))
> +		return -EPERM;
> +
>  	err = kstrtoul(buf, 10, &val);
>  	if (err)
>  		return err;
> @@ -1018,6 +1038,8 @@ static void lm63_init_client(struct lm63_data *data)
>  	u8 convrate;
>  
>  	data->config = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1);
> +	if (of_get_property(dev->of_node, "#pwm-cells", NULL))
> +		i2c_smbus_write_byte_data(client, LM63_REG_CONFIG_FAN, 0x20);
>  	data->config_fan = i2c_smbus_read_byte_data(client,
>  						    LM63_REG_CONFIG_FAN);
>  
> @@ -1087,6 +1109,96 @@ static void lm63_init_client(struct lm63_data *data)
>  		(data->config_fan & 0x20) ? "manual" : "auto");
>  }
>  
> +static int lm63_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> +				const struct pwm_state *state)
> +{
> +	struct lm63_data *data = to_pwm(chip);
> +	struct i2c_client *client = data->client;
> +	int ret = -EINVAL;
> +	u8 pwm_mode;
> +	u8 val;
> +
> +	mutex_lock(&data->update_lock);
> +	pwm_mode = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG_FAN);
> +	if (!(pwm_mode >> 5)) {
> +		mutex_unlock(&data->update_lock);
> +		return -EPERM;
> +	}
> +
> +	if (state->period > 1) {
> +		val = state->duty_cycle * 255 / (state->period - 1);
> +		val = clamp_val(val, 0, 255);
> +		val = data->pwm_highres ? val :
> +				(val * data->pwm1_freq * 2 + 127) / 255;
> +		ret = i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, val);
> +	}
> +
> +	mutex_unlock(&data->update_lock);
> +	return ret;
> +}
> +
> +static const struct pwm_ops lm63_pwm_ops = {
> +	.apply = lm63_pwm_apply,
> +	.owner = THIS_MODULE,
> +};
> +
> +static void lm63_pwm_remove(void *arg)
> +{
> +	struct lm63_data *data = arg;
> +
> +	pwmchip_remove(&data->chip);
> +}
> +
> +static void lm63_init_pwm(struct lm63_data *data)
> +{
> +	struct i2c_client *client = data->client;
> +	int ret;
> +
> +	/* Initialize chip */
> +
> +	data->chip.dev = &client->dev;
> +	data->chip.ops = &lm63_pwm_ops;
> +	data->chip.base = -1;
> +	data->chip.npwm = 1;
> +
> +	ret = pwmchip_add(&data->chip);
> +	if (ret < 0) {
> +		dev_warn(&client->dev, "pwmchip_add() failed: %d\n", ret);
> +		return;
> +	}
> +
> +	devm_add_action_or_reset(&client->dev, lm63_pwm_remove, data);
> +}
> +
> +static int lm63_get_temp(void *data, int *temp)
> +{
> +	struct lm63_thermal_sensor *thermal_sensor = data;
> +
> +	*temp = i2c_smbus_read_byte_data(thermal_sensor->data->client,
> +			LM63_REG_LOCAL_TEMP + thermal_sensor->sensor_id) * 1000;
> +
> +	return 0;
> +}
> +
> +static const struct thermal_zone_of_device_ops lm63_tz_ops = {
> +	.get_temp = lm63_get_temp,
> +};
> +
> +static void lm63_init_thermal(struct lm63_data *data)
> +{
> +	struct i2c_client *client = data->client;
> +	struct lm63_thermal_sensor *thermal_sensor;
> +	unsigned int i;
> +
> +	thermal_sensor = data->thermal_sensor;
> +	for (i = 0; i < MAX_SENSORS; i++, thermal_sensor++) {
> +		thermal_sensor->data = data;
> +		thermal_sensor->sensor_id = i;
> +		thermal_sensor->tz = devm_thermal_zone_of_sensor_register(&client->dev,
> +						 i, thermal_sensor, &lm63_tz_ops);
> +	}
> +}
> +
>  static const struct i2c_device_id lm63_id[];
>  
>  static int lm63_probe(struct i2c_client *client)
> @@ -1126,7 +1238,14 @@ static int lm63_probe(struct i2c_client *client)
>  
>  	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
>  							   data, data->groups);
> -	return PTR_ERR_OR_ZERO(hwmon_dev);
> +	if (IS_ERR(hwmon_dev))
> +		return PTR_ERR(hwmon_dev);
> +
> +	lm63_init_thermal(data);
> +	if (IS_ENABLED(CONFIG_PWM))
> +		lm63_init_pwm(data);
> +
> +	return 0;
>  }
>  
>  /*
> 




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux