This patch series adds hardware monitoring support for the ST STPDDC60 chip. The driver has been tested with a Flex BMR481 converter. The checkpatch script complains about an unneeded paranthesis in an if-statement but gcc gives a warning if it is removed. v3 stpddc60_get_offset: -Change type from u8 to int for "offset" to avoid potential overflow in calculation -Simplify if-expression for checking limits v2 -Remove "chips" enum since it is not used -Remove stpddc60_vid2mv function -Remove stpddc60_mv2l function -Add stpddc60_get_offset function -Add stpddc60_adjust_linear function stpddc60_read_word_data: -Return the value reported by MFR_READ_VOUT to avoid having to convert from VID -Add explanation why only 11 bits are used stpddc60_write_word_data: -Rewrite comment -Add support writing vout limits -Adjust linear exponent to match read value -Use the probe_new function callback Erik Rosen (2): Add pmbus_set_update() function to set update flag on selected sensors Add ST STPDDC60 pmbus driver Documentation/hwmon/index.rst | 1 + Documentation/hwmon/stpddc60.rst | 90 +++++++++++ MAINTAINERS | 7 + drivers/hwmon/pmbus/Kconfig | 10 ++ drivers/hwmon/pmbus/Makefile | 2 + drivers/hwmon/pmbus/pmbus.h | 1 + drivers/hwmon/pmbus/pmbus_core.c | 11 ++ drivers/hwmon/pmbus/stpddc60.c | 248 +++++++++++++++++++++++++++++++ 8 files changed, 370 insertions(+) create mode 100644 Documentation/hwmon/stpddc60.rst create mode 100644 drivers/hwmon/pmbus/stpddc60.c base-commit: 6ee1d745b7c9fd573fba142a2efdad76a9f1cb04 -- 2.20.1
