From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> [ Upstream commit 1eda52334e6d13eb1a85f713ce06dd39342b5020 ] With MAX_PWM being defined to 255 the code unsigned long period; ... period = ctx->pwm->args.period; state.duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM); calculates a too small value for duty_cycle if the configured period is big (either by discarding the 64 bit value ctx->pwm->args.period or by overflowing the multiplication). As this results in a too slow fan and so maybe an overheating machine better be safe than sorry and error out in .probe. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20201215092031.152243-1-u.kleine-koenig@xxxxxxxxxxxxxx Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/hwmon/pwm-fan.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c index c88ce77fe6763..df6f042fb605e 100644 --- a/drivers/hwmon/pwm-fan.c +++ b/drivers/hwmon/pwm-fan.c @@ -330,8 +330,18 @@ static int pwm_fan_probe(struct platform_device *pdev) ctx->pwm_value = MAX_PWM; - /* Set duty cycle to maximum allowed and enable PWM output */ pwm_init_state(ctx->pwm, &state); + /* + * __set_pwm assumes that MAX_PWM * (period - 1) fits into an unsigned + * long. Check this here to prevent the fan running at a too low + * frequency. + */ + if (state.period > ULONG_MAX / MAX_PWM + 1) { + dev_err(dev, "Configured period too big\n"); + return -EINVAL; + } + + /* Set duty cycle to maximum allowed and enable PWM output */ state.duty_cycle = ctx->pwm->args.period - 1; state.enabled = true; -- 2.27.0
