Den 28.11.2020 kl. 12:35, skrev Wilken Gottwalt:
On Sat, 28 Nov 2020 02:37:38 -0300
Jonas Malaco <jonas@xxxxxxxxxxxx> wrote:
On Thu, Nov 26, 2020 at 8:43 AM Wilken Gottwalt
<wilken.gottwalt@xxxxxxxxxx> wrote:
Adds support for another Corsair PSUs series: AX760i, AX860i, AX1200i,
AX1500i and AX1600i. The first 3 power supplies are supported through
the Corsair Link USB Dongle which is some kind of USB/Serial/TTL
converter especially made for the COM ports of these power supplies.
There are 3 known revisions of these adapters. The AX1500i power supply
has revision 3 built into the case and AX1600i is the only one in that
series, which has an unique usb hid id like the RM/RX series.
Can I ask what AXi power supplies were tested?
I ask because, based on the user-space implementations I am aware of,
the AXi dongle protocol appears to be different from the RMi/HXi series.
I was not able to test this against the AX power supplies, they are really
hard to find (and are far to expensive). But I went through all these tools
and stuck to the most common commands, which all 3 series support. Not every
series supports all commands (there also seem to be different firmwares in
the micro-conrollers). But this is fine, some sensors will show up as N/A.
Even my HX850i does not support all commands covered in this driver.
What kind of tests do you want / need ?
I have an AX860i here.
--
Regards
Thomas Backlund
