On 8/11/20 5:31 am, Henrik Rydberg wrote:
> On 2020-11-06 21:02, Henrik Rydberg wrote:
>>> So as it stands, it does not work at all. I will continue to check another machine, and see if I can get something working.
>>
>> On the MacBookAir3,1 the situation is somewhat better.
>>
>> The first three tree positions result in zero failures and 10 reads per second. The fourth yields zero failues and 11 reads per second, within the margin of similarity.
>>
>> So, the patch appears to have no apparent effect on the 3,1 series.
>>
>> Now onto fixing the 1,1 behavior.
>
> Hi again,
>
> This patch, v3, works for me, on both MBA1,1 and MBA3,1. Both machines yields 25 reads per second.
>
> It turns out that the origin code has a case that was not carried over to the v2 patch; the command byte needs to be resent upon the wrong status code. I added that back. Also, there seems to be a basic response time that needs to be respected, so I added back a small fixed delay after each write operation. I also took the liberty to reduce the number of status reads, and clean up error handling. Checkpatch is happy with this version.
>
> The code obviously needs to be retested on the other machines, but the logic still follows what you wrote, Brad, and I have also checked it against the VirtualSMC code. It appears to make sense, so hopefully there wont be additional issues.
>
> Thanks,
> Henrik
>
G'day Henrik,
Which kernel was this based on? It won't apply to my 5.9 tree.
I assume the sprinkling of udelay(APPLESMC_MIN_WAIT) means the SMC is
slow in getting its status register set up. Could we instead just put
a single one of those up-front in wait_status?
Any chance you could try this one? I've added a retry to send_command and
added a single global APPLESMC_MIN_WAIT before each status read.
>From looking at your modified send_command, it appears the trigger for a
retry is sending a command and the SMC doing absolutely nothing. This
should do the same thing.
Interestingly enough, by adding the udelay to wait_status on my machine I've
gone from 24 reads/s to 50 reads/s.
I've left out the remainder of the cleanups. Once we get a minimally working
patch I was going to look at a few cleanups, and I have some patches pending
to allow writing to the SMC from userspace (for setting BCLM and BFCL mainly)
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index a18887990f4a..2190de78b5f5 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -32,6 +32,7 @@
#include <linux/hwmon.h>
#include <linux/workqueue.h>
#include <linux/err.h>
+#include <linux/bits.h>
/* data port used by Apple SMC */
#define APPLESMC_DATA_PORT 0x300
@@ -42,6 +43,11 @@
#define APPLESMC_MAX_DATA_LENGTH 32
+/* Apple SMC status bits */
+#define SMC_STATUS_AWAITING_DATA BIT(0) /* SMC has data waiting */
+#define SMC_STATUS_IB_CLOSED BIT(1) /* Will ignore any input */
+#define SMC_STATUS_BUSY BIT(2) /* Command in progress */
+
/* wait up to 128 ms for a status change. */
#define APPLESMC_MIN_WAIT 0x0010
#define APPLESMC_RETRY_WAIT 0x0100
@@ -151,65 +157,73 @@ static unsigned int key_at_index;
static struct workqueue_struct *applesmc_led_wq;
/*
- * wait_read - Wait for a byte to appear on SMC port. Callers must
- * hold applesmc_lock.
+ * Wait for specific status bits with a mask on the SMC
+ * Used before and after writes, and before reads
*/
-static int wait_read(void)
+
+static int wait_status(u8 val, u8 mask)
{
unsigned long end = jiffies + (APPLESMC_MAX_WAIT * HZ) / USEC_PER_SEC;
u8 status;
int us;
+ udelay(APPLESMC_MIN_WAIT);
for (us = APPLESMC_MIN_WAIT; us < APPLESMC_MAX_WAIT; us <<= 1) {
- usleep_range(us, us * 16);
status = inb(APPLESMC_CMD_PORT);
- /* read: wait for smc to settle */
- if (status & 0x01)
+ if ((status & mask) == val)
return 0;
/* timeout: give up */
if (time_after(jiffies, end))
break;
+ usleep_range(us, us * 16);
}
-
- pr_warn("wait_read() fail: 0x%02x\n", status);
return -EIO;
}
/*
- * send_byte - Write to SMC port, retrying when necessary. Callers
+ * send_byte_data - Write to SMC data port. Callers
* must hold applesmc_lock.
+ * Parameter skip must be true on the last write of any
+ * command or it'll time out.
*/
-static int send_byte(u8 cmd, u16 port)
+
+static int send_byte_data(u8 cmd, u16 port, bool skip)
{
- u8 status;
- int us;
- unsigned long end = jiffies + (APPLESMC_MAX_WAIT * HZ) / USEC_PER_SEC;
+ int ret;
+ ret = wait_status(SMC_STATUS_BUSY, SMC_STATUS_BUSY | SMC_STATUS_IB_CLOSED);
+ if (ret)
+ return ret;
outb(cmd, port);
- for (us = APPLESMC_MIN_WAIT; us < APPLESMC_MAX_WAIT; us <<= 1) {
- usleep_range(us, us * 16);
- status = inb(APPLESMC_CMD_PORT);
- /* write: wait for smc to settle */
- if (status & 0x02)
- continue;
- /* ready: cmd accepted, return */
- if (status & 0x04)
- return 0;
- /* timeout: give up */
- if (time_after(jiffies, end))
- break;
- /* busy: long wait and resend */
- udelay(APPLESMC_RETRY_WAIT);
- outb(cmd, port);
- }
+ return wait_status(skip ? 0 : SMC_STATUS_BUSY, SMC_STATUS_BUSY);
+}
- pr_warn("send_byte(0x%02x, 0x%04x) fail: 0x%02x\n", cmd, port, status);
- return -EIO;
+static int send_byte(u8 cmd, u16 port)
+{
+ return send_byte_data(cmd, port, false);
}
+/*
+ * send_command - Write a command to the SMC. Callers must hold applesmc_lock.
+ * If SMC is in undefined state, any new command write resets the state machine.
+ */
+
static int send_command(u8 cmd)
{
- return send_byte(cmd, APPLESMC_CMD_PORT);
+ int ret;
+ int i;
+
+ for (i=0; i < 16; i++) {
+ ret = wait_status(0, SMC_STATUS_IB_CLOSED);
+ if (ret)
+ return ret;
+
+ outb(cmd, APPLESMC_CMD_PORT);
+ ret = wait_status(SMC_STATUS_BUSY, SMC_STATUS_BUSY);
+ if (!ret)
+ return ret;
+ }
+ return -EIO;
}
static int send_argument(const char *key)
@@ -239,7 +253,9 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len)
}
for (i = 0; i < len; i++) {
- if (wait_read()) {
+ if (wait_status(SMC_STATUS_AWAITING_DATA | SMC_STATUS_BUSY,
+ SMC_STATUS_AWAITING_DATA | SMC_STATUS_BUSY |
+ SMC_STATUS_IB_CLOSED)) {
pr_warn("%.4s: read data[%d] fail\n", key, i);
return -EIO;
}
@@ -250,7 +266,7 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len)
for (i = 0; i < 16; i++) {
udelay(APPLESMC_MIN_WAIT);
status = inb(APPLESMC_CMD_PORT);
- if (!(status & 0x01))
+ if (!(status & SMC_STATUS_AWAITING_DATA))
break;
data = inb(APPLESMC_DATA_PORT);
}
@@ -275,7 +291,7 @@ static int write_smc(u8 cmd, const char *key, const u8 *buffer, u8 len)
}
for (i = 0; i < len; i++) {
- if (send_byte(buffer[i], APPLESMC_DATA_PORT)) {
+ if (send_byte_data(buffer[i], APPLESMC_DATA_PORT, i == len - 1)) {
pr_warn("%s: write data fail\n", key);
return -EIO;
}
