On Wed, Nov 4, 2020 at 10:40 PM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>
> On Wed, Nov 04, 2020 at 03:09:23PM +0800, Yungteng Hsu wrote:
> > Add the pmbus driver for the STMicroelectronics pm6764 voltage regulator.
> >
> > the output voltage use the MFR_READ_VOUT 0xD4
> > vout value returned is linear11
> >
> > Signed-off-by: Charles Hsu <hsu.yungteng@xxxxxxxxx>
>
> Please use standard Linux kernel code formatting rules.
> Run checkpatch --strict on the patch and make sure it does not report
> any problems.
>
> total: 1 errors, 39 warnings, 3 checks, 96 lines checked
>
> is a bit much for a 74-line patch.
>
Okay, I got it.
> > ---
> > drivers/hwmon/pmbus/Kconfig | 8 ++++
> > drivers/hwmon/pmbus/Makefile | 1 +
> > drivers/hwmon/pmbus/pm6764tr.c | 74 ++++++++++++++++++++++++++++++++++
> > 3 files changed, 83 insertions(+)
> > create mode 100644 drivers/hwmon/pmbus/pm6764tr.c
> >
> > diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> > index a25faf69fce3..2b487c401a4e 100644
> > --- a/drivers/hwmon/pmbus/Kconfig
> > +++ b/drivers/hwmon/pmbus/Kconfig
> > @@ -220,6 +220,14 @@ config SENSORS_MP2975
> > This driver can also be built as a module. If so, the module will
> > be called mp2975.
> >
> > +config SENSORS_PM6764TR
> > + tristate "PM6764TR"
> > + help
> > + If you say yes here you get hardware monitoring support for PM6764TR.
> > +
> > + This driver can also be built as a module. If so, the module will
> > + be called pm6764tr.
> > +
> > config SENSORS_PXE1610
> > tristate "Infineon PXE1610"
> > help
> > diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> > index 4c97ad0bd791..31ebdef5d4a6 100644
> > --- a/drivers/hwmon/pmbus/Makefile
> > +++ b/drivers/hwmon/pmbus/Makefile
> > @@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_MAX31785) += max31785.o
> > obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
> > obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
> > obj-$(CONFIG_SENSORS_MP2975) += mp2975.o
> > +obj-$(CONFIG_SENSORS_PM6764TR) += pm6764tr.o
> > obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o
> > obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o
> > obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
> > diff --git a/drivers/hwmon/pmbus/pm6764tr.c b/drivers/hwmon/pmbus/pm6764tr.c
> > new file mode 100644
> > index 000000000000..b125a1cbfea5
> > --- /dev/null
> > +++ b/drivers/hwmon/pmbus/pm6764tr.c
> > @@ -0,0 +1,74 @@
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/init.h>
> > +#include <linux/err.h>
> > +#include <linux/slab.h>
> > +#include <linux/mutex.h>
> > +#include <linux/i2c.h>
> > +#include <linux/pmbus.h>
>
> Alphabetic include file order, please.
>
update include file order in v2.
> > +#include "pmbus.h"
> > +
> > +#define PM6764TR_PMBUS_READ_VOUT 0xD4
>
> tab after PM6764TR_PMBUS_READ_VOUT, please.
>
> I see you don't use any tabs in the patch. Please do.
>
> > +
> > +static int pm6764tr_read_word_data(struct i2c_client *client, int
> > page, int reg)
>
> Corrupted ?
>
> That makes me wonder if the patch was corrupted by your e-mail system,
> and if that system replaced tabs with spaces. Is that possible ?
>
This is corrupted by e-mail system,
and tabs are replaced with spaces.
I'll check the e-mail system setting and updated in v2.
> > +{
> > + int ret;
> > +
> > + switch (reg) {
> > + case PMBUS_VIRT_READ_VMON:
> > + ret = pmbus_read_word_data(client, page,
> > + PM6764TR_PMBUS_READ_VOUT);
>
> That can be one line (line limit is now 100 columns).
>
fix to one line in v2.
> > + break;
> > + default:
> > + ret = -ENODATA;
> > + break;
> > + }
> > + return ret;
> > +}
> > +
> > +static struct pmbus_driver_info pm6764tr_info = {
> > + .pages = 1,
> > + .format[PSC_VOLTAGE_IN] = linear,
> > + .format[PSC_VOLTAGE_OUT] = vid,
> > + .format[PSC_TEMPERATURE] = linear,
> > + .format[PSC_CURRENT_OUT] = linear,
> > + .format[PSC_POWER] = linear,
> > + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
> > + PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | PMBUS_HAVE_VMON |
> > + PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_VOUT |
> > + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> > + .read_word_data = pm6764tr_read_word_data,
> > +};
> > +
> > +static int pm6764tr_probe(struct i2c_client *client,
> > + const struct i2c_device_id *id)
>
> Please use the new style probe function (probe_new).
>
Change form .probe to .probe_new in v2.
> > +{
> > + return pmbus_do_probe(client, id, &pm6764tr_info);
> > +}
> > +
> > +static const struct i2c_device_id pm6764tr_id[] = {
> > + {"pm6764tr", 0},
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(i2c, pm6764tr_id);
> > +
> > +static const struct of_device_id pm6764tr_of_match[] = {
> > + {.compatible = "pm6764tr"},
> > + {}
> > +};
> > +/* This is the driver that will be inserted */
> > +static struct i2c_driver pm6764tr_driver = {
> > + .driver = {
> > + .name = "pm6764tr",
> > + .of_match_table = of_match_ptr(pm6764tr_of_match),
> > + },
> > + .probe = pm6764tr_probe,
> > + .remove = pmbus_do_remove,
>
> pmbus_do_remove no longer exists.
>
remove .remove = pmbus_do_remove in v2.
> > + .id_table = pm6764tr_id,
> > +};
> > +
> > +module_i2c_driver(pm6764tr_driver);
> > +
> > +MODULE_AUTHOR("Charles Hsu");
> > +MODULE_DESCRIPTION("PMBus driver for ST PM6764TR");
> > +MODULE_LICENSE("GPL");
> > --
> > 2.25.1
