Hi!
> Add support for the iEi WT61P803 PUZZLE LED driver.
> Currently only the front panel power LED is supported.
>
> This driver depends on the iEi WT61P803 PUZZLE MFD driver.
> +static int iei_wt61p803_puzzle_led_brightness_set_blocking(struct led_classdev *cdev,
> + enum led_brightness brightness)
> +{
> + struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev);
> + unsigned char *resp_buf = priv->response_buffer;
> + unsigned char led_power_cmd[5] = {
> + IEI_WT61P803_PUZZLE_CMD_HEADER_START,
> + IEI_WT61P803_PUZZLE_CMD_LED,
> + IEI_WT61P803_PUZZLE_CMD_LED_POWER,
> + (char)IEI_LED_OFF
> + };
> + size_t reply_size;
> +
> + mutex_lock(&priv->lock);
> + if (brightness == LED_OFF) {
> + led_power_cmd[3] = (char)IEI_LED_OFF;
> + priv->led_power_state = LED_OFF;
> + } else {
> + led_power_cmd[3] = (char)IEI_LED_ON;
> + priv->led_power_state = LED_ON;
> + }
> + mutex_unlock(&priv->lock);
Are you sure you need the mutex?
> + ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
> + if (ret) {
> + dev_err(dev, "Could not register LED\n");
> + goto err_child_node;
> + }
> + return 0;
> +err_child_node:
> + fwnode_handle_put(child);
> + return ret;
> +}
Is the fwnode_handle_put(child); missing in non-error path somewhere?
> +MODULE_LICENSE("GPL");
Make sure this is consistent with file header. GPLv2+, if you can.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: PGP signature
