Re: [PATCH v2 1/7] dt-bindings: Add iEi vendor prefix and iEi WT61P803 PUZZLE driver bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 26 Sep 2020 15:55:08 +0200
Luka Kovacic <luka.kovacic@xxxxxxxxxx> wrote:

> diff --git a/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
> new file mode 100644
> index 000000000000..502d97630ecc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
> @@ -0,0 +1,48 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/iei,wt61p803-puzzle-leds.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: iEi WT61P803 PUZZLE MCU LED module from IEI Integration Corp.
> +
> +maintainers:
> +  - Luka Kovacic <luka.kovacic@xxxxxxxxxx>
> +
> +description: |
> +  This module is a part of the iEi WT61P803 PUZZLE MFD device. For more details
> +  see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
> +
> +  The LED module is a sub-node of the MCU node in the Device Tree.
> +
> +properties:
> +  compatible:
> +    const: iei,wt61p803-puzzle-leds
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +patternProperties:
> +  "^led@0$":
> +    type: object

Here should be a ref to LED common.yaml:
	$ref: common.yaml#

> +    description: |
> +      Properties for a single LED.
> +
> +    properties:
> +      reg:
> +        description:
> +          Index of the LED. Only one LED is supported at the moment.
> +        minimum: 0
> +        maximum: 0
> +
> +      label: true
> +
> +      linux,default-trigger: true
> +

label is obsolete, linux,default-trigger as well. 

> +required:
> +  - compatible
> +  - "#address-cells"
> +  - "#size-cells"
> diff --git a/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
> new file mode 100644
> index 000000000000..38846c758372
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
> @@ -0,0 +1,82 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/iei,wt61p803-puzzle.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: iEi WT61P803 PUZZLE MCU from IEI Integration Corp.
> +
> +maintainers:
> +  - Luka Kovacic <luka.kovacic@xxxxxxxxxx>
> +
> +description: |
> +  iEi WT61P803 PUZZLE MCU is embedded in some iEi Puzzle series boards.
> +  It's used for controlling system power states, fans, LEDs and temperature
> +  sensors.
> +
> +  For Device Tree bindings of other sub-modules (HWMON, LEDs) refer to the
> +  binding documents under the respective subsystem directories.
> +
> +properties:
> +  compatible:
> +    const: iei,wt61p803-puzzle
> +
> +  current-speed:
> +    description:
> +      Serial bus speed in bps
> +    maxItems: 1

What does this mean? Is this connected via uart? Why not name it
`baud`? I realize that `current-speed` is used in other device trees
(and `baud` as well), but what "current" is this? I don't suppose this
means electric current :)

Have you passed these via dt_binding_check?

Marek



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux