Problem: We use voltage dividers so that the voltage presented at the voltage sense pins is confusing. We might need to convert these readings to more meaningful readings given the voltage divider. Solution: Read the voltage divider resistance from dts and convert the voltage reading to a more meaningful reading. Testing: max20730 with voltage divider Signed-off-by: Chu Lin <linchuyuan@xxxxxxxxxx> --- drivers/hwmon/pmbus/max20730.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/hwmon/pmbus/max20730.c b/drivers/hwmon/pmbus/max20730.c index a151a2b588a5..fbf2f1e6c969 100644 --- a/drivers/hwmon/pmbus/max20730.c +++ b/drivers/hwmon/pmbus/max20730.c @@ -31,6 +31,7 @@ struct max20730_data { struct pmbus_driver_info info; struct mutex lock; /* Used to protect against parallel writes */ u16 mfr_devset1; + u32 vout_voltage_divider[2]; }; #define to_max20730_data(x) container_of(x, struct max20730_data, info) @@ -114,6 +115,14 @@ static int max20730_read_word_data(struct i2c_client *client, int page, max_c = max_current[data->id][(data->mfr_devset1 >> 5) & 0x3]; ret = val_to_direct(max_c, PSC_CURRENT_OUT, info); break; + case PMBUS_READ_VOUT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret > 0 && data->vout_voltage_divider[0] && data->vout_voltage_divider[1]) { + u64 temp = DIV_ROUND_CLOSEST_ULL((u64)ret * data->vout_voltage_divider[1], + data->vout_voltage_divider[0]); + ret = clamp_val(temp, 0, 0xffff); + } + break; default: ret = -ENODATA; break; @@ -364,6 +373,15 @@ static int max20730_probe(struct i2c_client *client, data->id = chip_id; mutex_init(&data->lock); memcpy(&data->info, &max20730_info[chip_id], sizeof(data->info)); + if (of_property_read_u32_array(client->dev.of_node, "vout-voltage-divider", + data->vout_voltage_divider, + ARRAY_SIZE(data->vout_voltage_divider)) != 0) + memset(data->vout_voltage_divider, 0, sizeof(data->vout_voltage_divider)); + if (data->vout_voltage_divider[1] < data->vout_voltage_divider[0]) { + dev_err(dev, + "The total resistance of voltage divider is less than output resistance\n"); + return -ENODEV; + } ret = i2c_smbus_read_word_data(client, MAX20730_MFR_DEVSET1); if (ret < 0) -- 2.28.0.681.g6f77f65b4e-goog