On Mon, Sep 14, 2020 at 03:07:15PM -0500, Wei Huang wrote:
> Zen3 thermal info is supported via a new PCI device ID. Also the voltage
> telemetry registers and the current factors need to be defined. k10temp
> driver then searches for CPU family 0x19 and configures k10temp_data
> accordingly.
>
> Signed-off-by: Wei Huang <wei.huang2@xxxxxxx>
Applied.
Thanks,
Guenter
> ---
> drivers/hwmon/k10temp.c | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
> index 49e8ebf8da32..a250481b5a97 100644
> --- a/drivers/hwmon/k10temp.c
> +++ b/drivers/hwmon/k10temp.c
> @@ -95,6 +95,13 @@ static DEFINE_MUTEX(nb_smu_ind_mutex);
> #define F17H_M31H_CFACTOR_ICORE 1000000 /* 1A / LSB */
> #define F17H_M31H_CFACTOR_ISOC 310000 /* 0.31A / LSB */
>
> +/* F19h thermal registers through SMN */
> +#define F19H_M01_SVI_TEL_PLANE0 (ZEN_SVI_BASE + 0x14)
> +#define F19H_M01_SVI_TEL_PLANE1 (ZEN_SVI_BASE + 0x10)
> +
> +#define F19H_M01H_CFACTOR_ICORE 1000000 /* 1A / LSB */
> +#define F19H_M01H_CFACTOR_ISOC 310000 /* 0.31A / LSB */
> +
> struct k10temp_data {
> struct pci_dev *pdev;
> void (*read_htcreg)(struct pci_dev *pdev, u32 *regval);
> @@ -527,6 +534,22 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> k10temp_get_ccd_support(pdev, data, 8);
> break;
> }
> + } else if (boot_cpu_data.x86 == 0x19) {
> + data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK;
> + data->read_tempreg = read_tempreg_nb_zen;
> + data->show_temp |= BIT(TDIE_BIT);
> + data->is_zen = true;
> +
> + switch (boot_cpu_data.x86_model) {
> + case 0x0 ... 0x1: /* Zen3 */
> + data->show_current = true;
> + data->svi_addr[0] = F19H_M01_SVI_TEL_PLANE0;
> + data->svi_addr[1] = F19H_M01_SVI_TEL_PLANE1;
> + data->cfactor[0] = F19H_M01H_CFACTOR_ICORE;
> + data->cfactor[1] = F19H_M01H_CFACTOR_ISOC;
> + k10temp_get_ccd_support(pdev, data, 8);
> + break;
> + }
> } else {
> data->read_htcreg = read_htcreg_pci;
> data->read_tempreg = read_tempreg_pci;
> @@ -564,6 +587,7 @@ static const struct pci_device_id k10temp_id_table[] = {
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F3) },
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M60H_DF_F3) },
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) },
> + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_DF_F3) },
> { PCI_VDEVICE(HYGON, PCI_DEVICE_ID_AMD_17H_DF_F3) },
> {}
> };
