Drop the doubled word "and". Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx> Cc: Jonathan Corbet <corbet@xxxxxxx> Cc: linux-doc@xxxxxxxxxxxxxxx Cc: Jean Delvare <jdelvare@xxxxxxxx> Cc: Guenter Roeck <linux@xxxxxxxxxxxx> Cc: linux-hwmon@xxxxxxxxxxxxxxx --- Documentation/hwmon/w83627ehf.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- linux-next-20200701.orig/Documentation/hwmon/w83627ehf.rst +++ linux-next-20200701/Documentation/hwmon/w83627ehf.rst @@ -96,7 +96,7 @@ sensors. The configured source for each in tempX_label. Temperatures are measured in degrees Celsius and measurement resolution is 1 -degC for temp1 and and 0.5 degC for temp2 and temp3. For temp4 and higher, +degC for temp1 and 0.5 degC for temp2 and temp3. For temp4 and higher, resolution is 1 degC for W83667HG-B and 0.0 degC for NCT6775F and NCT6776F. An alarm is triggered when the temperature gets higher than high limit; it stays on until the temperature falls below the hysteresis value.
