On 7/2/20 8:48 PM, Chris Ruehl wrote: > Add documentation for the newly added DTS support in the shtc1 driver. > > Signed-off-by: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx> > --- > .../bindings/hwmon/sensirion,shtc1.yaml | 53 +++++++++++++++++++ > 1 file changed, 53 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml > > diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml > new file mode 100644 > index 000000000000..e3e292bc6d7d > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml > @@ -0,0 +1,53 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Sensirion SHTC1 Humidity and Temperature Sensor IC > + > +maintainers: > + - jdelvare@xxxxxxxx > + > +description: | > + The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor > + designed especially for battery-driven high-volume consumer electronics > + applications. > + For further information refere to Documentation/hwmon/shtc1.rst > + > + This binding document describes the binding for the hardware monitor > + portion of the driver. > + > +properties: > + compatible: > + enum: > + - sensirion,shtc1 > + - sensirion,shtw1 > + - sensirion,shtc3 > + > + reg: I2C address 0x70 > + > +Optional properties: > + sensirion,blocking_io: | > + u8, if > 0 the i2c bus hold until measure finished (default 0) > + sensirion,high_precision: | > + u8, if > 0 aquire data with high precision (default 1) > + Why u8 and not boolean ? Guenter > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +Example: > + &i2c1 { > + status = "okay"; > + clock-frequency = <400000>; > + > + shtc3@70 { > + compatible = "sensirion,shtc3"; > + reg = <0x70> > + sensirion,blocking_io = <1>; > + status = "okay"; > + }; > + }; >
