On Fri, Jun 26, 2020 at 07:59:36AM +0200, Marius Zachmann wrote:
> This is v7 of a driver for the Corsair Commander Pro.
Note to self: Reword when applying.
> It provides sysfs attributes for:
> - Reading fan speed
> - Reading temp sensors
> - Reading voltage values
> - Writing pwm and reading last written pwm
> - Reading fan and temp connection status
>
> It is an usb driver, so it needs to be ignored by usbhid.
> The Corsair Commander Pro is a fan controller and provides
> no means for user interaction.
> The two device numbers are there, because there is a slightly
> different version of the same device. (Only difference
> seem to be in some presets.)
>
> This is based on the staging/hwmon tree.
>
> Signed-off-by: Marius Zachmann <mail@xxxxxxxxxxxxxxxxx>
Looks good. For my reference:
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
We'll have to wait for an ACK from a HID maintainer before I can apply it.
Thanks,
Guenter
> ---
>
> Changes from v6
> - used break after connection checks in ccp_is_visible
>
> Changes from v5
> - added bitmaps for temp_cnct and fan_cnct
> - ccp_visible returns 0 when there is no connection
> and removed tests for connection in other functions
> - removed temp labels
> - add define for fan and temp sensor count
> - removed unneccesary mutex from get_temp_cnct and get_fan_cnct
> and moved these functions directly above ccp_probe
> - no more setting return values in ccp_read, ccp_read_string, ccp_write
> just return directly instead of break
> - get_data returns values (always >= 0) directly
> - inlined get_temp
> - removed first two error messages in send_usb_cmd and
> changed last one to dev_dbg
> - comment alignments and clarifications
> - renamed goto label to "out_unlock"
>
> Changes from v4
> - squashed 3 commits into one.
>
> Changes from v3
> - add device ids to hid_ignore_list in hid-quirks.h
> - removed unused update_interval
> - ccp_disconnect is static
> ---
> Documentation/hwmon/corsair-cpro.rst | 39 +++
> Documentation/hwmon/index.rst | 1 +
> MAINTAINERS | 6 +
> drivers/hid/hid-quirks.c | 2 +
> drivers/hwmon/Kconfig | 10 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/corsair-cpro.c | 456 +++++++++++++++++++++++++++
> 7 files changed, 515 insertions(+)
> create mode 100644 Documentation/hwmon/corsair-cpro.rst
> create mode 100644 drivers/hwmon/corsair-cpro.c
>
> diff --git a/Documentation/hwmon/corsair-cpro.rst b/Documentation/hwmon/corsair-cpro.rst
> new file mode 100644
> index 000000000000..5913e23d764c
> --- /dev/null
> +++ b/Documentation/hwmon/corsair-cpro.rst
> @@ -0,0 +1,39 @@
> +.. SPDX-License-Identifier: GPL-2.0-or-later
> +
> +Kernel driver corsair-cpro
> +==========================
> +
> +Supported devices:
> +
> + * Corsair Commander Pro
> + * Corsair Commander Pro (1000D)
> +
> +Author: Marius Zachmann
> +
> +Description
> +-----------
> +
> +This driver implements the sysfs interface for the Corsair Commander Pro.
> +The Corsair Commander Pro is a USB device with 6 fan connectors,
> +4 temperature sensor connectors and 2 Corsair LED connectors.
> +It can read the voltage levels on the SATA power connector.
> +
> +Usage Notes
> +-----------
> +
> +Since it is a USB device, hotswapping is possible. The device is autodetected.
> +
> +Sysfs entries
> +-------------
> +
> +======================= =====================================================================
> +in0_input Voltage on SATA 12v
> +in1_input Voltage on SATA 5v
> +in2_input Voltage on SATA 3.3v
> +temp[1-4]_input Temperature on connected temperature sensors
> +fan[1-6]_input Connected fan rpm.
> +fan[1-6]_label Shows fan type as detected by the device.
> +pwm[1-6] Sets the fan speed. Values from 0-255.
> + When reading, it reports the last value if it was set by the driver.
> + Otherwise returns 0.
> +======================= =====================================================================
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 55ff4b7c5349..750d3a975d82 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -47,6 +47,7 @@ Hardware Monitoring Kernel Drivers
> bel-pfe
> bt1-pvt
> coretemp
> + corsair-cpro
> da9052
> da9055
> dell-smm-hwmon
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 68f21d46614c..47b0361718f4 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4400,6 +4400,12 @@ S: Maintained
> F: Documentation/hwmon/coretemp.rst
> F: drivers/hwmon/coretemp.c
>
> +CORSAIR-CPRO HARDWARE MONITOR DRIVER
> +M: Marius <mail@xxxxxxxxxxxxxxxxx>
> +L: linux-hwmon@xxxxxxxxxxxxxxx
> +S: Maintained
> +F: drivers/hwmon/corsair-cpro.c
> +
> COSA/SRP SYNC SERIAL DRIVER
> M: Jan "Yenya" Kasprzak <kas@xxxxxxxxxx>
> S: Maintained
> diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
> index ca8b5c261c7c..7b7bc7737c53 100644
> --- a/drivers/hid/hid-quirks.c
> +++ b/drivers/hid/hid-quirks.c
> @@ -699,6 +699,8 @@ static const struct hid_device_id hid_ignore_list[] = {
> { HID_USB_DEVICE(USB_VENDOR_ID_AXENTIA, USB_DEVICE_ID_AXENTIA_FM_RADIO) },
> { HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) },
> { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
> + { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, 0x0c10) },
> + { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, 0x1d00) },
> { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) },
> { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI4713) },
> { HID_USB_DEVICE(USB_VENDOR_ID_CMEDIA, USB_DEVICE_ID_CM109) },
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 288ae9f63588..8b046a5dfa40 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -439,6 +439,16 @@ config SENSORS_BT1_PVT_ALARMS
> the data conversion will be periodically performed and the data will be
> saved in the internal driver cache.
>
> +config SENSORS_CORSAIR_CPRO
> + tristate "Corsair Commander Pro controller"
> + depends on USB
> + help
> + If you say yes here you get support for the Corsair Commander Pro
> + controller.
> +
> + This driver can also be built as a module. If so, the module
> + will be called corsair-cpro.
> +
> config SENSORS_DRIVETEMP
> tristate "Hard disk drives with temperature sensors"
> depends on SCSI && ATA
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 3e32c21f5efe..18e1ef74ade7 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -56,6 +56,7 @@ obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
> obj-$(CONFIG_SENSORS_AXI_FAN_CONTROL) += axi-fan-control.o
> obj-$(CONFIG_SENSORS_BT1_PVT) += bt1-pvt.o
> obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
> +obj-$(CONFIG_SENSORS_CORSAIR_CPRO) += corsair-cpro.o
> obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
> obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o
> obj-$(CONFIG_SENSORS_DELL_SMM) += dell-smm-hwmon.o
> diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c
> new file mode 100644
> index 000000000000..a22583acc229
> --- /dev/null
> +++ b/drivers/hwmon/corsair-cpro.c
> @@ -0,0 +1,456 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * corsair-cpro.c - Linux driver for Corsair Commander Pro
> + * Copyright (C) 2020 Marius Zachmann <mail@xxxxxxxxxxxxxxxxx>
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/kernel.h>
> +#include <linux/hwmon.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/slab.h>
> +#include <linux/types.h>
> +#include <linux/usb.h>
> +
> +#define USB_VENDOR_ID_CORSAIR 0x1b1c
> +#define USB_PRODUCT_ID_CORSAIR_COMMANDERPRO 0x0c10
> +#define USB_PRODUCT_ID_CORSAIR_1000D 0x1d00
> +
> +#define OUT_BUFFER_SIZE 63
> +#define IN_BUFFER_SIZE 16
> +#define LABEL_LENGTH 11
> +
> +#define CTL_GET_TMP_CNCT 0x10 /*
> + * returns in bytes 1-4 for each temp sensor:
> + * 0 not connected
> + * 1 connected
> + */
> +#define CTL_GET_TMP 0x11 /*
> + * send: byte 1 is channel, rest zero
> + * rcv: returns temp for channel in centi-degree celsius
> + * in bytes 1 and 2
> + * returns 17 in byte 0 if no sensor is connected
> + */
> +#define CTL_GET_VOLT 0x12 /*
> + * send: byte 1 is rail number: 0 = 12v, 1 = 5v, 2 = 3.3v
> + * rcv: returns millivolt in bytes 1,2
> + */
> +#define CTL_GET_FAN_CNCT 0x20 /*
> + * returns in bytes 1-6 for each fan:
> + * 0 not connected
> + * 1 3pin
> + * 2 4pin
> + */
> +#define CTL_GET_FAN_RPM 0x21 /*
> + * send: byte 1 is channel, rest zero
> + * rcv: returns rpm in bytes 1,2
> + */
> +#define CTL_SET_FAN_FPWM 0x23 /*
> + * set fixed pwm
> + * send: byte 1 is fan number
> + * send: byte 2 is percentage from 0 - 100
> + */
> +
> +#define NUM_FANS 6
> +#define NUM_TEMP_SENSORS 4
> +
> +struct ccp_device {
> + struct usb_device *udev;
> + struct mutex mutex; /* whenever buffer is used, lock before send_usb_cmd */
> + u8 *buffer;
> + int pwm[6];
> + DECLARE_BITMAP(temp_cnct, NUM_TEMP_SENSORS);
> + DECLARE_BITMAP(fan_cnct, NUM_FANS);
> + char fan_label[6][LABEL_LENGTH];
> +};
> +
> +/* send command, check for error in response, response in ccp->buffer */
> +static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2)
> +{
> + int actual_length;
> + int ret;
> +
> + memset(ccp->buffer, 0x00, OUT_BUFFER_SIZE);
> + ccp->buffer[0] = command;
> + ccp->buffer[1] = byte1;
> + ccp->buffer[2] = byte2;
> +
> + ret = usb_bulk_msg(ccp->udev, usb_sndintpipe(ccp->udev, 2), ccp->buffer, OUT_BUFFER_SIZE,
> + &actual_length, 1000);
> + if (ret)
> + return ret;
> +
> + /* response needs to be received every time */
> + ret = usb_bulk_msg(ccp->udev, usb_rcvintpipe(ccp->udev, 1), ccp->buffer, IN_BUFFER_SIZE,
> + &actual_length, 1000);
> + if (ret)
> + return ret;
> +
> + /* first byte of response is error code */
> + if (ccp->buffer[0] != 0x00) {
> + dev_dbg(&ccp->udev->dev, "device response error: %d", ccp->buffer[0]);
> + return -EIO;
> + }
> +
> + return 0;
> +}
> +
> +/* requests and returns single data values depending on channel */
> +static int get_data(struct ccp_device *ccp, int command, int channel)
> +{
> + int ret;
> +
> + mutex_lock(&ccp->mutex);
> +
> + ret = send_usb_cmd(ccp, command, channel, 0);
> + if (ret)
> + goto out_unlock;
> +
> + ret = (ccp->buffer[1] << 8) + ccp->buffer[2];
> +
> +out_unlock:
> + mutex_unlock(&ccp->mutex);
> + return ret;
> +}
> +
> +static int set_pwm(struct ccp_device *ccp, int channel, long val)
> +{
> + int ret;
> +
> + if (val < 0 || val > 255)
> + return -EINVAL;
> +
> + ccp->pwm[channel] = val;
> +
> + /* The Corsair Commander Pro uses values from 0-100 */
> + val = DIV_ROUND_CLOSEST(val * 100, 255);
> +
> + mutex_lock(&ccp->mutex);
> +
> + ret = send_usb_cmd(ccp, CTL_SET_FAN_FPWM, channel, val);
> +
> + mutex_unlock(&ccp->mutex);
> + return ret;
> +}
> +
> +static int ccp_read_string(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, const char **str)
> +{
> + struct ccp_device *ccp = dev_get_drvdata(dev);
> +
> + switch (type) {
> + case hwmon_fan:
> + switch (attr) {
> + case hwmon_fan_label:
> + *str = ccp->fan_label[channel];
> + return 0;
> + default:
> + break;
> + }
> + break;
> + default:
> + break;
> + }
> +
> + return -EOPNOTSUPP;
> +}
> +
> +static int ccp_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct ccp_device *ccp = dev_get_drvdata(dev);
> + int ret;
> +
> + switch (type) {
> + case hwmon_temp:
> + switch (attr) {
> + case hwmon_temp_input:
> + ret = get_data(ccp, CTL_GET_TMP, channel);
> + if (ret < 0)
> + return ret;
> + *val = ret * 10;
> + return 0;
> + default:
> + break;
> + }
> + break;
> + case hwmon_fan:
> + switch (attr) {
> + case hwmon_fan_input:
> + ret = get_data(ccp, CTL_GET_FAN_RPM, channel);
> + if (ret < 0)
> + return ret;
> + *val = ret;
> + return 0;
> + default:
> + break;
> + }
> + break;
> + case hwmon_pwm:
> + switch (attr) {
> + case hwmon_pwm_input:
> + /* how to read pwm values from the device is currently unknown */
> + /* driver returns last set value or 0 */
> + *val = ccp->pwm[channel];
> + return 0;
> + default:
> + break;
> + }
> + break;
> + case hwmon_in:
> + switch (attr) {
> + case hwmon_in_input:
> + ret = get_data(ccp, CTL_GET_VOLT, channel);
> + if (ret < 0)
> + return ret;
> + *val = ret;
> + return 0;
> + default:
> + break;
> + }
> + break;
> + default:
> + break;
> + }
> +
> + return -EOPNOTSUPP;
> +};
> +
> +static int ccp_write(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long val)
> +{
> + struct ccp_device *ccp = dev_get_drvdata(dev);
> +
> + switch (type) {
> + case hwmon_pwm:
> + switch (attr) {
> + case hwmon_pwm_input:
> + return set_pwm(ccp, channel, val);
> + default:
> + break;
> + }
> + break;
> + default:
> + break;
> + }
> +
> + return -EOPNOTSUPP;
> +};
> +
> +static umode_t ccp_is_visible(const void *data, enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + const struct ccp_device *ccp = data;
> +
> + switch (type) {
> + case hwmon_temp:
> + if (!test_bit(channel, ccp->temp_cnct))
> + break;
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + return 0444;
> + case hwmon_temp_label:
> + return 0444;
> + default:
> + break;
> + }
> + break;
> + case hwmon_fan:
> + if (!test_bit(channel, ccp->fan_cnct))
> + break;
> +
> + switch (attr) {
> + case hwmon_fan_input:
> + return 0444;
> + case hwmon_fan_label:
> + return 0444;
> + default:
> + break;
> + }
> + break;
> + case hwmon_pwm:
> + if (!test_bit(channel, ccp->fan_cnct))
> + break;
> +
> + switch (attr) {
> + case hwmon_pwm_input:
> + return 0644;
> + default:
> + break;
> + }
> + break;
> + case hwmon_in:
> + switch (attr) {
> + case hwmon_in_input:
> + return 0444;
> + default:
> + break;
> + }
> + break;
> + default:
> + break;
> + }
> +
> + return 0;
> +};
> +
> +static const struct hwmon_ops ccp_hwmon_ops = {
> + .is_visible = ccp_is_visible,
> + .read = ccp_read,
> + .read_string = ccp_read_string,
> + .write = ccp_write,
> +};
> +
> +static const struct hwmon_channel_info *ccp_info[] = {
> + HWMON_CHANNEL_INFO(chip,
> + HWMON_C_REGISTER_TZ),
> + HWMON_CHANNEL_INFO(temp,
> + HWMON_T_INPUT,
> + HWMON_T_INPUT,
> + HWMON_T_INPUT,
> + HWMON_T_INPUT
> + ),
> + HWMON_CHANNEL_INFO(fan,
> + HWMON_F_INPUT | HWMON_F_LABEL,
> + HWMON_F_INPUT | HWMON_F_LABEL,
> + HWMON_F_INPUT | HWMON_F_LABEL,
> + HWMON_F_INPUT | HWMON_F_LABEL,
> + HWMON_F_INPUT | HWMON_F_LABEL,
> + HWMON_F_INPUT | HWMON_F_LABEL
> + ),
> + HWMON_CHANNEL_INFO(pwm,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT
> + ),
> + HWMON_CHANNEL_INFO(in,
> + HWMON_I_INPUT,
> + HWMON_I_INPUT,
> + HWMON_I_INPUT
> + ),
> + NULL
> +};
> +
> +static const struct hwmon_chip_info ccp_chip_info = {
> + .ops = &ccp_hwmon_ops,
> + .info = ccp_info,
> +};
> +
> +/* read fan connection status and set labels */
> +static int get_fan_cnct(struct ccp_device *ccp)
> +{
> + int channel;
> + int mode;
> + int ret;
> +
> + ret = send_usb_cmd(ccp, CTL_GET_FAN_CNCT, 0, 0);
> + if (ret)
> + return ret;
> +
> + for (channel = 0; channel < NUM_FANS; channel++) {
> + mode = ccp->buffer[channel + 1];
> + if (mode == 0)
> + continue;
> +
> + set_bit(channel, ccp->fan_cnct);
> +
> + switch (mode) {
> + case 1:
> + scnprintf(ccp->fan_label[channel], LABEL_LENGTH,
> + "fan%d 3pin", channel + 1);
> + break;
> + case 2:
> + scnprintf(ccp->fan_label[channel], LABEL_LENGTH,
> + "fan%d 4pin", channel + 1);
> + break;
> + default:
> + scnprintf(ccp->fan_label[channel], LABEL_LENGTH,
> + "fan%d other", channel + 1);
> + break;
> + }
> + }
> +
> + return 0;
> +}
> +
> +/* read temp sensor connection status */
> +static int get_temp_cnct(struct ccp_device *ccp)
> +{
> + int channel;
> + int mode;
> + int ret;
> +
> + ret = send_usb_cmd(ccp, CTL_GET_TMP_CNCT, 0, 0);
> + if (ret)
> + return ret;
> +
> + for (channel = 0; channel < NUM_TEMP_SENSORS; channel++) {
> + mode = ccp->buffer[channel + 1];
> + if (mode == 0)
> + continue;
> +
> + set_bit(channel, ccp->temp_cnct);
> + }
> +
> + return 0;
> +}
> +
> +static int ccp_probe(struct usb_interface *intf, const struct usb_device_id *id)
> +{
> + struct device *hwmon_dev;
> + struct ccp_device *ccp;
> + int ret;
> +
> + ccp = devm_kzalloc(&intf->dev, sizeof(*ccp), GFP_KERNEL);
> + if (!ccp)
> + return -ENOMEM;
> +
> + ccp->buffer = devm_kmalloc(&intf->dev, OUT_BUFFER_SIZE, GFP_KERNEL);
> + if (!ccp->buffer)
> + return -ENOMEM;
> +
> + mutex_init(&ccp->mutex);
> +
> + ccp->udev = interface_to_usbdev(intf);
> +
> + /* temp and fan connection status only updates when device is powered on */
> + ret = get_temp_cnct(ccp);
> + if (ret)
> + return ret;
> +
> + ret = get_fan_cnct(ccp);
> + if (ret)
> + return ret;
> +
> + hwmon_dev = devm_hwmon_device_register_with_info(&intf->dev, "corsaircpro", ccp,
> + &ccp_chip_info, 0);
> +
> + return PTR_ERR_OR_ZERO(hwmon_dev);
> +}
> +
> +static void ccp_disconnect(struct usb_interface *intf)
> +{
> +}
> +
> +static const struct usb_device_id ccp_devices[] = {
> + { USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_COMMANDERPRO) },
> + { USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_1000D) },
> + { }
> +};
> +
> +static struct usb_driver ccp_driver = {
> + .name = "corsair-cpro",
> + .probe = ccp_probe,
> + .disconnect = ccp_disconnect,
> + .id_table = ccp_devices
> +};
> +
> +MODULE_DEVICE_TABLE(usb, ccp_devices);
> +MODULE_LICENSE("GPL");
> +
> +module_usb_driver(ccp_driver);
> --
> 2.27.0
