From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
PmBus devices support Block Write-Block Read Process
Call described in SMBus specification v 2.0 with the
exception that Block writes and reads are permitted to
have up 255 data bytes instead of max 32 bytes (SMBus).
This patch adds Block WR process call support for ADM1266.
Signed-off-by: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
---
drivers/hwmon/pmbus/Kconfig | 1 +
drivers/hwmon/pmbus/adm1266.c | 79 +++++++++++++++++++++++++++++++++++
2 files changed, 80 insertions(+)
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 6949483aa732..dc6971a7c49e 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -28,6 +28,7 @@ config SENSORS_PMBUS
config SENSORS_ADM1266
tristate "Analog Devices ADM1266 Sequencer"
+ select CRC8
help
If you say yes here you get hardware monitoring support for Analog
Devices ADM1266 Cascadable Super Sequencer.
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index a7ef048a9a5c..381d89a8569f 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -6,6 +6,7 @@
* Copyright 2020 Analog Devices Inc.
*/
+#include <linux/crc8.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -14,6 +15,82 @@
#include "pmbus.h"
+#define ADM1266_PMBUS_BLOCK_MAX 255
+
+DECLARE_CRC8_TABLE(pmbus_crc_table);
+
+/* Different from Block Read as it sends data and waits for the slave to
+ * return a value dependent on that data. The protocol is simply a Write Block
+ * followed by a Read Block without the Read-Block command field and the
+ * Write-Block STOP bit.
+ */
+int pmbus_block_xfer(struct i2c_client *client, u8 cmd, u8 w_len,
+ u8 *data_w, u8 *data_r)
+{
+ u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 2];
+ struct i2c_msg msgs[2] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .buf = write_buf,
+ .len = w_len + 2,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = ADM1266_PMBUS_BLOCK_MAX + 2,
+ }
+ };
+ u8 addr = 0;
+ u8 crc = 0;
+ int ret;
+
+ msgs[0].buf[0] = cmd;
+ msgs[0].buf[1] = w_len;
+ memcpy(&msgs[0].buf[2], data_w, w_len);
+
+ msgs[0].buf = i2c_get_dma_safe_msg_buf(&msgs[0], 1);
+ if (!msgs[0].buf)
+ return -ENOMEM;
+
+ msgs[1].buf = i2c_get_dma_safe_msg_buf(&msgs[1], 1);
+ if (!msgs[1].buf) {
+ i2c_put_dma_safe_msg_buf(msgs[0].buf, &msgs[0], false);
+ return -ENOMEM;
+ }
+
+ ret = i2c_transfer(client->adapter, msgs, 2);
+ if (ret != 2) {
+ ret = -EPROTO;
+ goto cleanup;
+ }
+
+ if (client->flags & I2C_CLIENT_PEC) {
+ addr = i2c_8bit_addr_from_msg(&msgs[0]);
+ crc = crc8(pmbus_crc_table, &addr, 1, crc);
+ crc = crc8(pmbus_crc_table, msgs[0].buf, msgs[0].len, crc);
+
+ addr = i2c_8bit_addr_from_msg(&msgs[1]);
+ crc = crc8(pmbus_crc_table, &addr, 1, crc);
+ crc = crc8(pmbus_crc_table, msgs[1].buf, msgs[1].buf[0] + 1,
+ crc);
+
+ if (crc != msgs[1].buf[msgs[1].buf[0] + 1]) {
+ ret = -EBADMSG;
+ goto cleanup;
+ }
+ }
+
+ memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]);
+ ret = msgs[1].buf[0];
+
+cleanup:
+ i2c_put_dma_safe_msg_buf(msgs[0].buf, &msgs[0], true);
+ i2c_put_dma_safe_msg_buf(msgs[1].buf, &msgs[1], true);
+
+ return ret;
+}
+
static int adm1266_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -24,6 +101,8 @@ static int adm1266_probe(struct i2c_client *client,
info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info),
GFP_KERNEL);
+ crc8_populate_msb(pmbus_crc_table, 0x7);
+
info->pages = 17;
info->format[PSC_VOLTAGE_OUT] = linear;
funcs = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
--
2.20.1
