The latest version of the On-Chip Controller (OCC) has a different format for the temperature sensor data. Add a new temperature sensor version to handle this data. Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx> --- drivers/hwmon/occ/common.c | 75 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c index 30e18eb60da7..52af0e728232 100644 --- a/drivers/hwmon/occ/common.c +++ b/drivers/hwmon/occ/common.c @@ -41,6 +41,14 @@ struct temp_sensor_2 { u8 value; } __packed; +struct temp_sensor_10 { + u32 sensor_id; + u8 fru_type; + u8 value; + u8 throttle; + u8 reserved; +} __packed; + struct freq_sensor_1 { u16 sensor_id; u16 value; @@ -307,6 +315,60 @@ static ssize_t occ_show_temp_2(struct device *dev, return snprintf(buf, PAGE_SIZE - 1, "%u\n", val); } +static ssize_t occ_show_temp_10(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int rc; + u32 val = 0; + struct temp_sensor_10 *temp; + struct occ *occ = dev_get_drvdata(dev); + struct occ_sensors *sensors = &occ->sensors; + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + + rc = occ_update_response(occ); + if (rc) + return rc; + + temp = ((struct temp_sensor_10 *)sensors->temp.data) + sattr->index; + + switch (sattr->nr) { + case 0: + val = get_unaligned_be32(&temp->sensor_id); + break; + case 1: + val = temp->value; + if (val == OCC_TEMP_SENSOR_FAULT) + return -EREMOTEIO; + + /* + * VRM doesn't return temperature, only alarm bit. This + * attribute maps to tempX_alarm instead of tempX_input for + * VRM + */ + if (temp->fru_type != OCC_FRU_TYPE_VRM) { + /* sensor not ready */ + if (val == 0) + return -EAGAIN; + + val *= 1000; + } + break; + case 2: + val = temp->fru_type; + break; + case 3: + val = temp->value == OCC_TEMP_SENSOR_FAULT; + break; + case 4: + val = temp->throttle * 1000; + break; + default: + return -EINVAL; + } + + return snprintf(buf, PAGE_SIZE - 1, "%u\n", val); +} + static ssize_t occ_show_freq_1(struct device *dev, struct device_attribute *attr, char *buf) { @@ -745,6 +807,10 @@ static int occ_setup_sensor_attrs(struct occ *occ) num_attrs += (sensors->temp.num_sensors * 4); show_temp = occ_show_temp_2; break; + case 0x10: + num_attrs += (sensors->temp.num_sensors * 5); + show_temp = occ_show_temp_10; + break; default: sensors->temp.num_sensors = 0; } @@ -844,6 +910,15 @@ static int occ_setup_sensor_attrs(struct occ *occ) attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_temp, NULL, 3, i); attr++; + + if (sensors->temp.version == 0x10) { + snprintf(attr->name, sizeof(attr->name), + "temp%d_max", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, + show_temp, NULL, + 4, i); + attr++; + } } } -- 2.24.0