Michael Walle <michael@xxxxxxxx> writes:
> +struct sl28cpld_gpio {
> + struct regmap_irq_chip irq_chip;
> + struct regmap_irq_chip_data *irq_data;
> +};
> +
> +static const struct regmap_irq sl28cpld_gpio_irqs[] = {
> + REGMAP_IRQ_REG_LINE(0, 8),
> + REGMAP_IRQ_REG_LINE(1, 8),
> + REGMAP_IRQ_REG_LINE(2, 8),
> + REGMAP_IRQ_REG_LINE(3, 8),
> + REGMAP_IRQ_REG_LINE(4, 8),
> + REGMAP_IRQ_REG_LINE(5, 8),
> + REGMAP_IRQ_REG_LINE(6, 8),
> + REGMAP_IRQ_REG_LINE(7, 8),
> +};
This is exactly the same as the one in the irq chip patch.
> +static int sl28cpld_gpio_irq_init(struct device *dev,
> + struct sl28cpld_gpio *gpio,
> + struct regmap *regmap, unsigned int base,
> + int irq)
> +{
> + struct regmap_irq_chip *irq_chip = &gpio->irq_chip;
> +
> + irq_chip->name = "sl28cpld-gpio-irq",
> + irq_chip->irqs = sl28cpld_gpio_irqs;
> + irq_chip->num_irqs = ARRAY_SIZE(sl28cpld_gpio_irqs);
> + irq_chip->num_regs = 1;
> + irq_chip->status_base = base + GPIO_REG_IP;
> + irq_chip->mask_base = base + GPIO_REG_IE;
> + irq_chip->mask_invert = true,
> + irq_chip->ack_base = base + GPIO_REG_IP;
> +
> + return devm_regmap_add_irq_chip_np(dev, dev_of_node(dev), regmap,
> + irq, IRQF_SHARED | IRQF_ONESHOT, 0,
> + irq_chip, &gpio->irq_data);
> +}
And this looks pretty familiar as well. What's the point of duplicating
that code?
Thanks,
tglx
