On 4/17/20 12:04 PM, Naveen Krishna Chatradhi wrote:
> This patch adds hwmon based amd_energy driver support for
> family 17h processors from AMD.
>
> The driver provides following interface to the userspace
> 1. Reports the per core consumption
> * file: "energy%d_input", label: "Ecore%03d"
> 2. Reports per socket energy consumption
> * file: "energy%d_input", label: "Esocket%d"
> 3. Reports scaled energy value in Joules.
>
> Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
> Signed-off-by: Naveen Krishna Chatradhi <nchatrad@xxxxxxx>
Please run checkpatch --strict and fix the alignment errors it reports.
> ---
> Changes in V2:
> Addressed comments from Guenter. Major changes include
> 1. Use chip_info instead of groups
> 2. Use standard file naming conventions
> 3. Report scaled values
>
> drivers/hwmon/Kconfig | 10 ++
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/amd_energy.c | 251 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 262 insertions(+)
> create mode 100644 drivers/hwmon/amd_energy.c
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 05a30832c6ba..d83f1403b429 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -324,6 +324,16 @@ config SENSORS_FAM15H_POWER
> This driver can also be built as a module. If so, the module
> will be called fam15h_power.
>
> +config SENSORS_AMD_ENERGY
> + tristate "AMD RAPL MSR based Energy driver"
> + depends on X86
> + help
> + If you say yes here you get support for core and package energy
> + sensors, based on RAPL MSR for AMD family 17h and above CPUs.
> +
> + This driver can also be built as a module. If so, the module
> + will be called as amd_energy.
> +
> config SENSORS_APPLESMC
> tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
> depends on INPUT && X86
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index b0b9c8e57176..318f89dc7133 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_SENSORS_ADT7411) += adt7411.o
> obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o
> obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
> obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
> +obj-$(CONFIG_SENSORS_AMD_ENERGY) += amd_energy.o
> obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
> obj-$(CONFIG_SENSORS_ARM_SCMI) += scmi-hwmon.o
> obj-$(CONFIG_SENSORS_ARM_SCPI) += scpi-hwmon.o
> diff --git a/drivers/hwmon/amd_energy.c b/drivers/hwmon/amd_energy.c
> new file mode 100644
> index 000000000000..7127f1f5f5ee
> --- /dev/null
> +++ b/drivers/hwmon/amd_energy.c
> @@ -0,0 +1,251 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/*
> + * Copyright (C) 2020 Advanced Micro Devices, Inc.
> + */
> +
> +#include <asm/cpu_device_id.h>
> +
> +#include <linux/cpu.h>
> +#include <linux/cpumask.h>
> +#include <linux/device.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
Leftover from v1 ?
> +#include <linux/kernel.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/processor.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/sysfs.h>
Leftover from v1 ?
> +#include <linux/types.h>
> +
> +#define DRVNAME "amd_energy"
> +
> +#define ENERGY_PWR_UNIT_MSR 0xC0010299
> +#define ENERGY_CORE_MSR 0xC001029A
> +#define ENERGY_PKG_MSR 0xC001029B
> +
> +#define AMD_TIME_UNIT_MASK 0xF0000
> +#define AMD_ENERGY_UNIT_MASK 0x01F00
> +#define AMD_POWER_UNIT_MASK 0x0000F
> +
> +#define ENERGY_STATUS_MASK 0xffffffff
> +
> +#define AMD_FAM_17 0x17 /* ZP, SSP */
> +
> +/* Useful macros */
> +#define AMD_CPU_FAM_ANY(_family, _model) \
> +{ \
> + .vendor = X86_VENDOR_AMD, \
> + .family = _family, \
> + .model = _model, \
> + .feature = X86_FEATURE_ANY, \
> +}
> +
> +#define AMD_CPU_FAM(_model) \
> + AMD_CPU_FAM_ANY(AMD_FAM_##_model, X86_MODEL_ANY)
> +
> +struct amd_energy_data {
> + struct hwmon_channel_info energy_info;
> + const struct hwmon_channel_info *info[2];
> + struct hwmon_chip_info chip;
> +};
> +
> +static int nr_cpus, nr_socks;
> +static uint64_t energy_units;
> +
> +static int amd_energy_read_labels(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel, const char **str)
> +{
> + char *buf = devm_kcalloc(dev, 10, sizeof(char), GFP_KERNEL);
> +
> + if (channel >= nr_cpus)
> + scnprintf(buf, 9, "Esocket%u", channel - nr_cpus);
> + else
> + scnprintf(buf, 9, "Ecore%03u", channel);
> +
> + *str = buf;
> +
> + return 0;
> +}
> +
> +static int get_energy_units(void)
> +{
> + uint64_t rapl_units;
> + int ret;
> +
> + ret = rdmsrl_safe(ENERGY_PWR_UNIT_MSR, &rapl_units);
> + if (ret)
> + return -EAGAIN;
> +
> + energy_units = (rapl_units & AMD_ENERGY_UNIT_MASK) >> 8;
> + return 0;
> +}
> +
> +static int amd_energy_read(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + uint64_t value;
> + int cpu = 0, ret;
There is no need to initialize 'cpu'.
> + u32 reg;
> +
> + if (channel >= nr_cpus) {
> + reg = ENERGY_PKG_MSR;
> + cpu = cpumask_first_and(cpu_online_mask,
> + cpumask_of_node(channel - nr_cpus));
> + } else {
> + reg = ENERGY_CORE_MSR;
> + cpu = channel;
> + }
> +
> + if (!cpu_online(cpu))
> + return -ENODEV;
> +
> + ret = rdmsrl_safe_on_cpu(cpu, reg, &value);
> + if (ret)
> + return -EAGAIN;
> +
> + if ((energy_units == 0) && get_energy_units())
Please no unnecessary ( ).
> + return -EAGAIN;
> +
> + /* Energy consumed = (1/(2^ESU) * RAW * 1000000UL) Joules */
> + *val = (long)value * div64_ul(1000000UL, (1 << energy_units));
BIT ?
> +
> + return 0;
> +}
> +
> +static umode_t amd_energy_is_visible(const void *_data,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + return 0444;
> +}
> +
> +static const struct hwmon_ops amd_energy_ops = {
> + .is_visible = amd_energy_is_visible,
> + .read = amd_energy_read,
> + .read_string = amd_energy_read_labels,
> +};
> +
> +static int amd_create_sensor(struct device *dev,
> + struct amd_energy_data *data,
> + u8 type, u32 config)
> +{
> + int i;
> + u32 *s_config;
> + struct hwmon_channel_info *info = &data->energy_info;
> +
> + nr_socks = num_online_nodes();
> + nr_cpus = num_online_cpus();
> +
This code makes me wonder what happens if some CPUs are taken
offline/online dynamically. Have you tried that ?
> + s_config = devm_kcalloc(dev, nr_cpus + nr_socks,
> + sizeof(u32), GFP_KERNEL);
> + if (!s_config)
> + return -ENOMEM;
> +
> + info->type = type;
> + info->config = s_config;
> +
> + for (i = 0; i < nr_cpus + nr_socks; i++)
> + s_config[i] = config;
> +
> + return 0;
> +}
> +
> +static int amd_energy_probe(struct platform_device *pdev)
> +{
> + struct device *hwmon_dev;
> + struct amd_energy_data *data;
> + struct device *dev = &pdev->dev;
> + int ret;
> +
> + ret = get_energy_units();
> +
> + data = devm_kzalloc(dev, sizeof(struct amd_energy_data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->chip.ops = &amd_energy_ops;
> + data->chip.info = data->info;
> +
> + /* Populate per-core energy reporting */
> + data->info[0] = &data->energy_info;
> + amd_create_sensor(dev, data, hwmon_energy,
> + HWMON_E_INPUT | HWMON_E_LABEL);
> +
> + data->info[1] = NULL;
data was allocated with devm_kzalloc(). There is no need to clean
that field again.
> +
> + hwmon_dev = devm_hwmon_device_register_with_info(dev, DRVNAME,
> + data,
> + &data->chip,
> + NULL);
> + return PTR_ERR_OR_ZERO(hwmon_dev);
> +}
> +
> +static int amd_energy_remove(struct platform_device *pdev)
> +{
> + return 0;
> +}
> +
> +static const struct platform_device_id amd_energy_ids[] = {
> + { .name = DRVNAME, },
> + {}
> +};
> +MODULE_DEVICE_TABLE(platform, amd_energy_ids);
> +
> +static struct platform_driver amd_energy_driver = {
> + .probe = amd_energy_probe,
> + .remove = amd_energy_remove,
> + .id_table = amd_energy_ids,
> + .driver = {
> + .name = DRVNAME,
> + },
> +};
> +
> +static struct platform_device *amd_energy_platdev;
> +
> +static const struct x86_cpu_id cpu_ids[] __initconst = {
> + AMD_CPU_FAM(17),
> + {}
> +};
> +MODULE_DEVICE_TABLE(x86cpu, cpu_ids);
> +
> +static int __init amd_energy_init(void)
> +{
> + int ret;
> +
> + if (!x86_match_cpu(cpu_ids))
> + return -ENODEV;
> +
> + ret = platform_driver_register(&amd_energy_driver);
> + if (ret < 0)
> + return ret;
> +
> + amd_energy_platdev = platform_device_alloc(DRVNAME, 0);
> + if (!amd_energy_platdev)
> + return -ENOMEM;
> +
> + ret = platform_device_add(amd_energy_platdev);
> + if (ret) {
> + platform_device_unregister(amd_energy_platdev);
> + return ret;
> + }
> +
> + return ret;
> +}
> +
> +static void __exit amd_energy_exit(void)
> +{
> + platform_device_unregister(amd_energy_platdev);
> + platform_driver_unregister(&amd_energy_driver);
> +}
> +
> +module_init(amd_energy_init);
> +module_exit(amd_energy_exit);
> +
> +MODULE_DESCRIPTION("Driver for AMD Energy reporting from RAPL MSR via HWMON interface");
> +MODULE_AUTHOR("Naveen Krishna Chatradhi <nchatrad@xxxxxxx>");
> +MODULE_LICENSE("GPL");
>
