Am 2020-04-19 17:56, schrieb Andrew Lunn:
On Sun, Apr 19, 2020 at 12:12:49PM +0200, Michael Walle wrote:
Hi Michael
You have an #if here...
+#if IS_ENABLED(CONFIG_HWMON)
+static umode_t bcm54140_hwmon_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ switch (type) {
+ case hwmon_in:
+ switch (attr) {
+ case hwmon_in_min:
+ case hwmon_in_max:
+ return 0644;
+ case hwmon_in_label:
+ case hwmon_in_input:
+ case hwmon_in_alarm:
+ return 0444;
+ default:
+ return 0;
+ }
+ case hwmon_temp:
+ switch (attr) {
+ case hwmon_temp_min:
+ case hwmon_temp_max:
+ return 0644;
+ case hwmon_temp_input:
+ case hwmon_temp_alarm:
+ return 0444;
+ default:
+ return 0;
+ }
+ default:
+ return 0;
+ }
+}
...
+static const struct hwmon_chip_info bcm54140_chip_info = {
+ .ops = &bcm54140_hwmon_ops,
+ .info = bcm54140_hwmon_info,
};
static int bcm54140_phy_base_read_rdb(struct phy_device *phydev, u16
rdb)
@@ -203,6 +522,72 @@ static int bcm54140_get_base_addr_and_port(struct
phy_device *phydev)
return 0;
}
Still inside the #if. Some original code is now inside the #if/#endif.
Is this correct? Hard to see from just the patch.
Whoops you're correct, something got messed up here. Will
fix that in the next version.
-michael
+/* Check if one PHY has already done the init of the parts common to
all PHYs
+ * in the Quad PHY package.
+ */
+static bool bcm54140_is_pkg_init(struct phy_device *phydev)
+{
+ struct bcm54140_phy_priv *priv = phydev->priv;
+ struct mii_bus *bus = phydev->mdio.bus;
+ int base_addr = priv->base_addr;
+ struct phy_device *phy;
+ int i;
+
...
+static int bcm54140_phy_probe_once(struct phy_device *phydev)
+{
+ struct device *hwmon;
+ int ret;
+
+ /* enable hardware monitoring */
+ ret = bcm54140_enable_monitoring(phydev);
+ if (ret)
+ return ret;
+
+ hwmon = devm_hwmon_device_register_with_info(&phydev->mdio.dev,
+ "BCM54140", phydev,
+ &bcm54140_chip_info,
+ NULL);
+ return PTR_ERR_OR_ZERO(hwmon);
+}
+#endif
Thanks
Andrew
