Holger Hoffstätte observed that Samsung 850 Pro may return invalid temperatures for a short period of time after resume. Return -ENODATA to userspace if this is observed. Fixes: 5b46903d8bf3 ("hwmon: Driver for disk and solid state drives with temperature sensors") Reported-by: Holger Hoffstätte <holger@xxxxxxxxxxxxxxxxxxxxxx> Cc: Holger Hoffstätte <holger@xxxxxxxxxxxxxxxxxxxxxx> Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- drivers/hwmon/drivetemp.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/hwmon/drivetemp.c b/drivers/hwmon/drivetemp.c index 370d0c74eb01..9179460c2d9d 100644 --- a/drivers/hwmon/drivetemp.c +++ b/drivers/hwmon/drivetemp.c @@ -264,12 +264,18 @@ static int drivetemp_get_scttemp(struct drivetemp_data *st, u32 attr, long *val) return err; switch (attr) { case hwmon_temp_input: + if (!temp_is_valid(buf[SCT_STATUS_TEMP])) + return -ENODATA; *val = temp_from_sct(buf[SCT_STATUS_TEMP]); break; case hwmon_temp_lowest: + if (!temp_is_valid(buf[SCT_STATUS_TEMP_LOWEST])) + return -ENODATA; *val = temp_from_sct(buf[SCT_STATUS_TEMP_LOWEST]); break; case hwmon_temp_highest: + if (!temp_is_valid(buf[SCT_STATUS_TEMP_HIGHEST])) + return -ENODATA; *val = temp_from_sct(buf[SCT_STATUS_TEMP_HIGHEST]); break; default: -- 2.17.1