On Thu, Apr 02, 2020 at 10:36:48PM +0200, Michael Walle wrote:
> This adds support for the watchdog of the sl28cpld board management
> controller. This is part of a multi-function device driver.
>
> Signed-off-by: Michael Walle <michael@xxxxxxxx>
> ---
> drivers/watchdog/Kconfig | 11 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/sl28cpld_wdt.c | 242 ++++++++++++++++++++++++++++++++
> 3 files changed, 254 insertions(+)
> create mode 100644 drivers/watchdog/sl28cpld_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 0663c604bd64..6c53c1d0f348 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -340,6 +340,17 @@ config MLX_WDT
> To compile this driver as a module, choose M here: the
> module will be called mlx-wdt.
>
> +config SL28CPLD_WATCHDOG
> + tristate "Kontron sl28 watchdog"
> + depends on MFD_SL28CPLD
> + select WATCHDOG_CORE
> + help
> + Say Y here to include support for the watchdog timer
> + on the Kontron sl28 CPLD.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called sl28cpld_wdt.
> +
> # ALPHA Architecture
>
> # ARM Architecture
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 6de2e4ceef19..b9ecdf2d7347 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -224,3 +224,4 @@ obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o
> obj-$(CONFIG_MENZ069_WATCHDOG) += menz69_wdt.o
> obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o
> obj-$(CONFIG_STPMIC1_WATCHDOG) += stpmic1_wdt.o
> +obj-$(CONFIG_SL28CPLD_WATCHDOG) += sl28cpld_wdt.o
> diff --git a/drivers/watchdog/sl28cpld_wdt.c b/drivers/watchdog/sl28cpld_wdt.c
> new file mode 100644
> index 000000000000..79a7e36217a6
> --- /dev/null
> +++ b/drivers/watchdog/sl28cpld_wdt.c
> @@ -0,0 +1,242 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * sl28cpld watchdog driver.
> + *
> + * Copyright 2019 Kontron Europe GmbH
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/watchdog.h>
> +
> +/*
> + * Watchdog timer block registers.
> + */
> +#define WDT_CTRL 0x00
> +#define WDT_CTRL_EN BIT(0)
> +#define WDT_CTRL_LOCK BIT(2)
> +#define WDT_CTRL_ASSERT_SYS_RESET BIT(6)
> +#define WDT_CTRL_ASSERT_WDT_TIMEOUT BIT(7)
> +#define WDT_TIMEOUT 0x01
> +#define WDT_KICK 0x02
> +#define WDT_KICK_VALUE 0x6b
> +#define WDT_COUNT 0x03
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
> + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +static int timeout;
> +module_param(timeout, int, 0);
> +MODULE_PARM_DESC(timeout, "Initial watchdog timeout in seconds");
> +
> +struct sl28cpld_wdt {
> + struct watchdog_device wdd;
> + struct regmap *regmap;
> + u32 offset;
> + bool assert_wdt_timeout;
> +};
> +
> +static int sl28cpld_wdt_ping(struct watchdog_device *wdd)
> +{
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> + return regmap_write(wdt->regmap, wdt->offset + WDT_KICK,
> + WDT_KICK_VALUE);
> +}
> +
> +static int sl28cpld_wdt_start(struct watchdog_device *wdd)
> +{
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
> + unsigned int val;
> +
> + val = WDT_CTRL_EN | WDT_CTRL_ASSERT_SYS_RESET;
> + if (wdt->assert_wdt_timeout)
> + val |= WDT_CTRL_ASSERT_WDT_TIMEOUT;
> + if (nowayout)
> + val |= WDT_CTRL_LOCK;
> +
> + return regmap_update_bits(wdt->regmap, wdt->offset + WDT_CTRL,
> + val, val);
> +}
> +
> +static int sl28cpld_wdt_stop(struct watchdog_device *wdd)
> +{
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> + return regmap_update_bits(wdt->regmap, wdt->offset + WDT_CTRL,
> + WDT_CTRL_EN, 0);
> +}
> +
> +static unsigned int sl28cpld_wdt_status(struct watchdog_device *wdd)
> +{
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
> + unsigned int status;
> + int ret;
> +
> + ret = regmap_read(wdt->regmap, wdt->offset + WDT_CTRL, &status);
> + if (ret < 0)
> + return 0;
> +
> + /* is the watchdog timer running? */
> + return (status & WDT_CTRL_EN) << WDOG_ACTIVE;
This is really bad coding style. It uses the fact that WDT_CTRL_EN is
at bit position 0 and sets WDOG_ACTIVE accordingly.
But that it is wrong, not even considering the coding style problem.
The status function is supposed to return WDIOF_ bits. What it returns
if the watchdog is running is WDOG_ACTIVE, or BIT(0), which is then
reported to userspace as WDIOF_OVERHEAT.
> +}
> +
> +static unsigned int sl28cpld_wdt_get_timeleft(struct watchdog_device *wdd)
> +{
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
> + int ret;
> + unsigned int val;
> +
> + ret = regmap_read(wdt->regmap, wdt->offset + WDT_COUNT, &val);
> + if (ret < 0)
> + return 0;
> +
> + return val;
> +}
> +
> +static int sl28cpld_wdt_set_timeout(struct watchdog_device *wdd,
> + unsigned int timeout)
> +{
> + int ret;
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
Nit: Reverse christmas tree order looks a bit nicer.
> +
> + ret = regmap_write(wdt->regmap, wdt->offset + WDT_TIMEOUT, timeout);
> + if (ret == 0)
Please run checkpatch --strict and fix this and the reported alignment
problem.
> + wdd->timeout = timeout;
> +
> + return ret;
> +}
> +
> +static const struct watchdog_info sl28cpld_wdt_info = {
> + .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
> + .identity = "SMARC-sAL28 CPLD watchdog",
> +};
> +
> +static struct watchdog_ops sl28cpld_wdt_ops = {
> + .owner = THIS_MODULE,
> + .start = sl28cpld_wdt_start,
> + .stop = sl28cpld_wdt_stop,
> + .status = sl28cpld_wdt_status,
> + .ping = sl28cpld_wdt_ping,
> + .set_timeout = sl28cpld_wdt_set_timeout,
> + .get_timeleft = sl28cpld_wdt_get_timeleft,
> +};
> +
> +static int sl28cpld_wdt_locked(struct sl28cpld_wdt *wdt)
> +{
> + unsigned int val;
> + int ret;
> +
> + ret = regmap_read(wdt->regmap, wdt->offset + WDT_CTRL, &val);
> + if (ret < 0)
> + return ret;
> +
> + return val & WDT_CTRL_LOCK;
> +}
> +
> +static int sl28cpld_wdt_probe(struct platform_device *pdev)
> +{
> + struct sl28cpld_wdt *wdt;
> + struct watchdog_device *wdd;
> + struct resource *res;
> + unsigned int val;
> + int ret;
> +
> + if (!pdev->dev.parent)
> + return -ENODEV;
> +
> + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> + if (!wdt)
> + return -ENOMEM;
> +
> + wdt->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> + if (!wdt->regmap)
> + return -ENODEV;
> +
> + res = platform_get_resource(pdev, IORESOURCE_REG, 0);
> + if (res == NULL)
> + return -EINVAL;
> + wdt->offset = res->start;
> +
> + if (device_property_read_bool(&pdev->dev,
> + "kontron,assert-wdt-timeout-pin"))
> + wdt->assert_wdt_timeout = true;
This might be simpler written as
wdt->assert_wdt_timeout = device_property_read_bool(...);
> +
> + /* initialize struct watchdog_device */
> + wdd = &wdt->wdd;
> + wdd->parent = &pdev->dev;
> + wdd->info = &sl28cpld_wdt_info;
> + wdd->ops = &sl28cpld_wdt_ops;
> + wdd->min_timeout = 1;
> + wdd->max_timeout = 255;
> +
> + watchdog_set_drvdata(wdd, wdt);
> +
> + /* if the watchdog is locked, we set nowayout to true */
> + ret = sl28cpld_wdt_locked(wdt);
> + if (ret < 0)
> + return ret;
> + if (ret)
> + nowayout = true;
> + watchdog_set_nowayout(wdd, nowayout);
> +
> + /*
> + * Initial timeout value, can either be set by kernel parameter or by
> + * the device tree. If both are not given the current value is used.
> + */
> + watchdog_init_timeout(wdd, timeout, &pdev->dev);
> + if (wdd->timeout) {
> + sl28cpld_wdt_set_timeout(wdd, wdd->timeout);
> + } else {
> + ret = regmap_read(wdt->regmap, wdt->offset + WDT_TIMEOUT,
> + &val);
> + if (ret < 0)
> + return ret;
> + wdd->timeout = val;
Oddly enough that can result in a timeout of 0 if that is what the chip
reports. Are you sure that is acceptable ?
> + }
> +
> + watchdog_stop_on_reboot(wdd);
> + ret = devm_watchdog_register_device(&pdev->dev, wdd);
This does not inform the watchdog core if the watchdog is already active,
even though that is clearly supported. You might want to consider setting
WDOG_HW_RUNNING in that case.
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to register watchdog device\n");
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, wdt);
> +
I don't see where this is used.
> + dev_info(&pdev->dev, "CPLD watchdog: initial timeout %d sec%s\n",
> + wdd->timeout, nowayout ? ", nowayout" : "");
> +
> + return 0;
> +}
> +
> +static const struct of_device_id sl28cpld_wdt_of_match[] = {
> + { .compatible = "kontron,sl28cpld-wdt" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, sl28cpld_wdt_of_match);
> +
> +static const struct platform_device_id sl28cpld_wdt_id_table[] = {
> + { "sl28cpld-wdt" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(platform, sl28cpld_wdt_id_table);
> +
> +static struct platform_driver sl28cpld_wdt_driver = {
> + .probe = sl28cpld_wdt_probe,
> + .id_table = sl28cpld_wdt_id_table,
> + .driver = {
> + .name = KBUILD_MODNAME,
> + .of_match_table = sl28cpld_wdt_of_match,
> + },
> +};
> +module_platform_driver(sl28cpld_wdt_driver);
> +
> +MODULE_DESCRIPTION("sl28cpld Watchdog Driver");
> +MODULE_AUTHOR("Michael Walle <michael@xxxxxxxx>");
> +MODULE_LICENSE("GPL");
