There are quite a lot simple GPIO controller which are using regmap to
access the hardware. This driver tries to be a base to unify existing
code into one place. This won't cover everything but it should be a good
starting point.
It does not implement its own irq_chip because there is already a
generic one for regmap based devices. Instead, the irq_chip will be
instanciated in the parent driver and its irq domain will be associate
to this driver.
For now it consists of the usual registers, like set (and an optional
clear) data register, an input register and direction registers.
Out-of-the-box, it supports consecutive register mappings and mappings
where the registers have gaps between them with a linear mapping between
GPIO offset and bit position. For weirder mappings the user can register
its own .xlate().
Signed-off-by: Michael Walle <michael@xxxxxxxx>
---
drivers/gpio/Kconfig | 4 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-regmap.c | 320 ++++++++++++++++++++++++++++++++++++
include/linux/gpio-regmap.h | 88 ++++++++++
4 files changed, 413 insertions(+)
create mode 100644 drivers/gpio/gpio-regmap.c
create mode 100644 include/linux/gpio-regmap.h
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 1b96169d84f7..a8e148f4b2e0 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -73,6 +73,10 @@ config GPIO_GENERIC
depends on HAS_IOMEM # Only for IOMEM drivers
tristate
+config GPIO_REGMAP
+ depends on REGMAP
+ tristate
+
# put drivers in the right section, in alphabetical order
# This symbol is selected by both I2C and SPI expanders
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index b2cfc21a97f3..93e139fdfa57 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o
obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o
# Device drivers. Generally keep list sorted alphabetically
+obj-$(CONFIG_GPIO_REGMAP) += gpio-regmap.o
obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o
# directly supported by gpio-generic
diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c
new file mode 100644
index 000000000000..cc4437dc0521
--- /dev/null
+++ b/drivers/gpio/gpio-regmap.c
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * regmap based generic GPIO driver
+ *
+ * Copyright 2019 Michael Walle <michael@xxxxxxxx>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/gpio-regmap.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+struct gpio_regmap_data {
+ struct gpio_chip gpio_chip;
+ struct gpio_regmap *gpio;
+};
+
+/**
+ * gpio_regmap_simple_xlate() - translate base/offset to reg/mask
+ *
+ * Use a simple linear mapping to translate the offset to the bitmask.
+ */
+int gpio_regmap_simple_xlate(struct gpio_regmap *gpio, unsigned int base,
+ unsigned int offset,
+ unsigned int *reg, unsigned int *mask)
+{
+ unsigned int line = offset % gpio->ngpio_per_reg;
+ unsigned int stride = offset / gpio->ngpio_per_reg;
+
+ *reg = base + stride * gpio->reg_stride;
+ *mask = BIT(line);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(gpio_regmap_simple_xlate);
+
+static int gpio_regmap_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct gpio_regmap_data *data = gpiochip_get_data(chip);
+ struct gpio_regmap *gpio = data->gpio;
+ unsigned int base;
+ unsigned int val, reg, mask;
+ int ret;
+
+ /* we might not have an output register if we are input only */
+ if (gpio->reg_dat_base.valid)
+ base = gpio->reg_dat_base.addr;
+ else
+ base = gpio->reg_set_base.addr;
+
+ ret = gpio->reg_mask_xlate(gpio, base, offset, ®, &mask);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(gpio->regmap, reg, &val);
+ if (ret)
+ return ret;
+
+ return (val & mask) ? 1 : 0;
+}
+
+static void gpio_regmap_set(struct gpio_chip *chip, unsigned int offset,
+ int val)
+{
+ struct gpio_regmap_data *data = gpiochip_get_data(chip);
+ struct gpio_regmap *gpio = data->gpio;
+ unsigned int base = gpio->reg_set_base.addr;
+ unsigned int reg, mask;
+
+ gpio->reg_mask_xlate(gpio, base, offset, ®, &mask);
+ if (val)
+ regmap_update_bits(gpio->regmap, reg, mask, mask);
+ else
+ regmap_update_bits(gpio->regmap, reg, mask, 0);
+}
+
+static void gpio_regmap_set_with_clear(struct gpio_chip *chip,
+ unsigned int offset, int val)
+{
+ struct gpio_regmap_data *data = gpiochip_get_data(chip);
+ struct gpio_regmap *gpio = data->gpio;
+ unsigned int base;
+ unsigned int reg, mask;
+
+ if (val)
+ base = gpio->reg_set_base.addr;
+ else
+ base = gpio->reg_clr_base.addr;
+
+ gpio->reg_mask_xlate(gpio, base, offset, ®, &mask);
+ regmap_write(gpio->regmap, reg, mask);
+}
+
+static int gpio_regmap_get_direction(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct gpio_regmap_data *data = gpiochip_get_data(chip);
+ struct gpio_regmap *gpio = data->gpio;
+ unsigned int val, reg, mask;
+ unsigned int base;
+ int invert;
+ int ret;
+
+ if (gpio->reg_dir_out_base.valid) {
+ base = gpio->reg_dir_out_base.addr;
+ invert = 0;
+ } else if (gpio->reg_dir_in_base.valid) {
+ base = gpio->reg_dir_in_base.addr;
+ invert = 1;
+ } else {
+ return GPIO_LINE_DIRECTION_IN;
+ }
+
+ ret = gpio->reg_mask_xlate(gpio, base, offset, ®, &mask);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(gpio->regmap, reg, &val);
+ if (ret)
+ return ret;
+
+ if (!!(val & mask) ^ invert)
+ return GPIO_LINE_DIRECTION_OUT;
+ else
+ return GPIO_LINE_DIRECTION_IN;
+}
+
+static int gpio_regmap_set_direction(struct gpio_chip *chip,
+ unsigned int offset, bool output)
+{
+ struct gpio_regmap_data *data = gpiochip_get_data(chip);
+ struct gpio_regmap *gpio = data->gpio;
+ unsigned int val, reg, mask;
+ unsigned int base;
+ int invert;
+ int ret;
+
+ if (gpio->reg_dir_out_base.valid) {
+ base = gpio->reg_dir_out_base.addr;
+ invert = 0;
+ } else if (gpio->reg_dir_in_base.valid) {
+ base = gpio->reg_dir_in_base.addr;
+ invert = 1;
+ } else {
+ return 0;
+ }
+
+ ret = gpio->reg_mask_xlate(gpio, base, offset, ®, &mask);
+ if (ret)
+ return ret;
+
+ if (!invert)
+ val = (output) ? mask : 0;
+ else
+ val = (output) ? 0 : mask;
+
+ return regmap_update_bits(gpio->regmap, reg, mask, val);
+}
+
+static int gpio_regmap_direction_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ return gpio_regmap_set_direction(chip, offset, false);
+}
+
+static int gpio_regmap_direction_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ gpio_regmap_set(chip, offset, value);
+ return gpio_regmap_set_direction(chip, offset, true);
+}
+
+static int gpio_regmap_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+ struct gpio_regmap_data *data = gpiochip_get_data(chip);
+ struct gpio_regmap *gpio = data->gpio;
+
+ /* the user might have its own .to_irq callback */
+ if (gpio->to_irq)
+ return gpio->to_irq(gpio, offset);
+
+ return irq_create_mapping(gpio->irq_domain, offset);
+}
+
+/**
+ * gpio_regmap_register() - Register a generic regmap GPIO controller
+ *
+ * @gpio: gpio_regmap device to register
+ *
+ * Returns 0 on success or an errno on failure.
+ */
+int gpio_regmap_register(struct gpio_regmap *gpio)
+{
+ struct gpio_regmap_data *d;
+ struct gpio_chip *chip;
+ int ret;
+
+ if (!gpio->parent)
+ return -EINVAL;
+
+ if (!gpio->ngpio)
+ return -EINVAL;
+
+ /* we need at least one */
+ if (!gpio->reg_dat_base.valid && !gpio->reg_set_base.valid)
+ return -EINVAL;
+
+ /* we don't support having both registers simulaniously for now */
+ if (gpio->reg_dir_out_base.valid && gpio->reg_dir_in_base.valid)
+ return -EINVAL;
+
+ /* if not set, assume they are consecutive */
+ if (!gpio->reg_stride)
+ gpio->reg_stride = 1;
+
+ /* if not set, assume there is only one register */
+ if (!gpio->ngpio_per_reg)
+ gpio->ngpio_per_reg = gpio->ngpio;
+
+ if (!gpio->reg_mask_xlate)
+ gpio->reg_mask_xlate = gpio_regmap_simple_xlate;
+
+ d = kzalloc(sizeof(*d), GFP_KERNEL);
+ if (!d)
+ return -ENOMEM;
+
+ gpio->data = d;
+ d->gpio = gpio;
+
+ chip = &d->gpio_chip;
+ chip->parent = gpio->parent;
+ chip->label = gpio->label;
+ chip->base = -1;
+ chip->ngpio = gpio->ngpio;
+ chip->can_sleep = true;
+ chip->get = gpio_regmap_get;
+
+ if (!chip->label)
+ chip->label = dev_name(gpio->parent);
+
+ if (gpio->reg_set_base.valid && gpio->reg_clr_base.valid)
+ chip->set = gpio_regmap_set_with_clear;
+ else if (gpio->reg_set_base.valid)
+ chip->set = gpio_regmap_set;
+
+ if (gpio->reg_dir_in_base.valid || gpio->reg_dir_out_base.valid) {
+ chip->get_direction = gpio_regmap_get_direction;
+ chip->direction_input = gpio_regmap_direction_input;
+ chip->direction_output = gpio_regmap_direction_output;
+ }
+
+ if (gpio->irq_domain)
+ chip->to_irq = gpio_regmap_to_irq;
+
+ ret = gpiochip_add_data(chip, d);
+ if (ret < 0)
+ goto err_alloc;
+
+ return 0;
+
+err_alloc:
+ kfree(d);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(gpio_regmap_register);
+
+/**
+ * gpio_regmap_unregister() - Unregister a generic regmap GPIO controller
+ *
+ * @gpio: gpio_regmap device to unregister
+ */
+void gpio_regmap_unregister(struct gpio_regmap *gpio)
+{
+ gpiochip_remove(&gpio->data->gpio_chip);
+ kfree(gpio->data);
+}
+EXPORT_SYMBOL_GPL(gpio_regmap_unregister);
+
+static void devm_gpio_regmap_unregister(struct device *dev, void *res)
+{
+ gpio_regmap_unregister(*(struct gpio_regmap **)res);
+}
+
+/**
+ * devm_gpio_regmap_register() - resource managed gpio_regmap_register()
+ *
+ * @dev: device that is registering this GPIO device
+ * @gpio: gpio_regmap device to register
+ *
+ * Managed gpio_regmap_register(). For generic regmap GPIO device registered by
+ * this function, gpio_regmap_unregister() is automatically called on driver
+ * detach. See gpio_regmap_register() for more information.
+ */
+int devm_gpio_regmap_register(struct device *dev, struct gpio_regmap *gpio)
+{
+ struct gpio_regmap **ptr;
+ int ret;
+
+ ptr = devres_alloc(devm_gpio_regmap_unregister, sizeof(*ptr),
+ GFP_KERNEL);
+ if (!ptr)
+ return -ENOMEM;
+
+ ret = gpio_regmap_register(gpio);
+ if (ret) {
+ devres_free(ptr);
+ return ret;
+ }
+
+ *ptr = gpio;
+ devres_add(dev, ptr);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(devm_gpio_regmap_register);
+
+MODULE_AUTHOR("Michael Walle <michael@xxxxxxxx>");
+MODULE_DESCRIPTION("GPIO generic regmap driver core");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/gpio-regmap.h b/include/linux/gpio-regmap.h
new file mode 100644
index 000000000000..ad63955e0e43
--- /dev/null
+++ b/include/linux/gpio-regmap.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _LINUX_GPIO_REGMAP_H
+#define _LINUX_GPIO_REGMAP_H
+
+struct gpio_regmap_addr {
+ unsigned int addr;
+ bool valid;
+};
+#define GPIO_REGMAP_ADDR(_addr) \
+ ((struct gpio_regmap_addr) { .addr = _addr, .valid = true })
+
+/**
+ * struct gpio_regmap - Description of a generic regmap gpio_chip.
+ *
+ * @parent: The parent device
+ * @regmap: The regmap use to access the registers
+ * given, the name of the device is used
+ * @label: (Optional) Descriptive name for GPIO controller.
+ * If not given, the name of the device is used.
+ * @ngpio: Number of GPIOs
+ * @reg_dat_base: (Optional) (in) register base address
+ * @reg_set_base: (Optional) set register base address
+ * @reg_clr_base: (Optional) clear register base address
+ * @reg_dir_in_base: (Optional) out setting register base address
+ * @reg_dir_out_base: (Optional) in setting register base address
+ * @reg_stride: (Optional) May be set if the registers (of the
+ * same type, dat, set, etc) are not consecutive.
+ * @ngpio_per_reg: Number of GPIOs per register
+ * @irq_domain: (Optional) IRQ domain if the controller is
+ * interrupt-capable
+ * @reg_mask_xlate: (Optional) Translates base address and GPIO
+ * offset to a register/bitmask pair. If not
+ * given the default gpio_regmap_simple_xlate()
+ * is used.
+ * @to_irq: (Optional) Maps GPIO offset to a irq number.
+ * By default assumes a linear mapping of the
+ * given irq_domain.
+ * @driver_data: Pointer to the drivers private data. Not used by
+ * gpio-regmap.
+ *
+ * The reg_mask_xlate translates a given base address and GPIO offset to
+ * register and mask pair. The base address is one of the given reg_*_base.
+ */
+struct gpio_regmap {
+ struct device *parent;
+ struct regmap *regmap;
+ struct gpio_regmap_data *data;
+
+ const char *label;
+ int ngpio;
+
+ struct gpio_regmap_addr reg_dat_base;
+ struct gpio_regmap_addr reg_set_base;
+ struct gpio_regmap_addr reg_clr_base;
+ struct gpio_regmap_addr reg_dir_in_base;
+ struct gpio_regmap_addr reg_dir_out_base;
+ int reg_stride;
+ int ngpio_per_reg;
+ struct irq_domain *irq_domain;
+
+ int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base,
+ unsigned int offset, unsigned int *reg,
+ unsigned int *mask);
+ int (*to_irq)(struct gpio_regmap *gpio, unsigned int offset);
+
+ void *driver_data;
+};
+
+static inline void gpio_regmap_set_drvdata(struct gpio_regmap *gpio,
+ void *data)
+{
+ gpio->driver_data = data;
+}
+
+static inline void *gpio_regmap_get_drvdata(struct gpio_regmap *gpio)
+{
+ return gpio->driver_data;
+}
+
+int gpio_regmap_register(struct gpio_regmap *gpio);
+void gpio_regmap_unregister(struct gpio_regmap *gpio);
+int devm_gpio_regmap_register(struct device *dev, struct gpio_regmap *gpio);
+int gpio_regmap_simple_xlate(struct gpio_regmap *gpio, unsigned int base,
+ unsigned int offset,
+ unsigned int *reg, unsigned int *mask);
+
+#endif /* _LINUX_GPIO_REGMAP_H */
--
2.20.1
