All chips of this series with published datasheets support IIN, PIN, and STATUS_INPUT PMBus commands. Per TI Power Management Forum, "TPS53679 and TPS53681 have the same PMBus command set". There is no reason to believe that this does not apply to TPS53688. Let's assume that this is correct and add support for IIN, PIN, and STATUS_INPUT to TPS53679 and TPS53688 to simplify adding support for more chips of the same series. At the same time, drop reporting VIN on channel 2. On chips with published datasheets this voltage is identical to the voltage reported on channel 1, and there is no reason to believe that this is different for TPS53679 and TPS53888. Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- drivers/hwmon/pmbus/tps53679.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/pmbus/tps53679.c b/drivers/hwmon/pmbus/tps53679.c index 77b2fb06c0d2..2a6495424a87 100644 --- a/drivers/hwmon/pmbus/tps53679.c +++ b/drivers/hwmon/pmbus/tps53679.c @@ -63,13 +63,13 @@ static struct pmbus_driver_info tps53679_info = { .format[PSC_TEMPERATURE] = linear, .format[PSC_CURRENT_OUT] = linear, .format[PSC_POWER] = linear, - .func[0] = PMBUS_HAVE_VIN | + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | + PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT, - .func[1] = PMBUS_HAVE_VIN | - PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT, -- 2.17.1