Re: [PATCH v11 14/14] hwmon: Add PECI dimmtemp driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[...]

+static int get_dimm_temp(struct peci_dimmtemp *priv, int dimm_no)
+{
+    int dimm_order = dimm_no % priv->gen_info->dimm_idx_max;
+    int chan_rank = dimm_no / priv->gen_info->dimm_idx_max;
+    struct peci_rd_pci_cfg_local_msg rp_msg;
+    u8  cfg_data[4];
+    int ret;
+
+    if (!peci_sensor_need_update(&priv->temp[dimm_no]))
+        return 0;
+
+    ret = read_ddr_dimm_temp_config(priv, chan_rank, cfg_data);
+    if (ret)
+        return ret;
+
+    priv->temp[dimm_no].value = cfg_data[dimm_order] * 1000;
+
+    switch (priv->gen_info->model) {
+    case INTEL_FAM6_SKYLAKE_X:
+        rp_msg.addr = priv->mgr->client->addr;
+        rp_msg.bus = 2;
+        /*
+         * Device 10, Function 2: IMC 0 channel 0 -> rank 0
+         * Device 10, Function 6: IMC 0 channel 1 -> rank 1
+         * Device 11, Function 2: IMC 0 channel 2 -> rank 2
+         * Device 12, Function 2: IMC 1 channel 0 -> rank 3
+         * Device 12, Function 6: IMC 1 channel 1 -> rank 4
+         * Device 13, Function 2: IMC 1 channel 2 -> rank 5
+         */
+        rp_msg.device = 10 + chan_rank / 3 * 2 +
+                 (chan_rank % 3 == 2 ? 1 : 0);
+        rp_msg.function = chan_rank % 3 == 1 ? 6 : 2;
+        rp_msg.reg = 0x120 + dimm_order * 4;
+        rp_msg.rx_len = 4;
+
+        ret = peci_command(priv->mgr->client->adapter,
+                   PECI_CMD_RD_PCI_CFG_LOCAL, &rp_msg);
+        if (rp_msg.cc != PECI_DEV_CC_SUCCESS)
+            ret = -EAGAIN;
+        if (ret)
+            return ret;
+
+        priv->temp_max[dimm_no] = rp_msg.pci_config[1] * 1000;
+        priv->temp_crit[dimm_no] = rp_msg.pci_config[2] * 1000;
+        break;
+    case INTEL_FAM6_SKYLAKE_XD:
+        rp_msg.addr = priv->mgr->client->addr;
+        rp_msg.bus = 2;
+        /*
+         * Device 10, Function 2: IMC 0 channel 0 -> rank 0
+         * Device 10, Function 6: IMC 0 channel 1 -> rank 1
+         * Device 12, Function 2: IMC 1 channel 0 -> rank 2
+         * Device 12, Function 6: IMC 1 channel 1 -> rank 3
+         */
+        rp_msg.device = 10 + chan_rank / 2 * 2;
+        rp_msg.function = (chan_rank % 2) ? 6 : 2;
+        rp_msg.reg = 0x120 + dimm_order * 4;
+        rp_msg.rx_len = 4;
+
+        ret = peci_command(priv->mgr->client->adapter,
+                   PECI_CMD_RD_PCI_CFG_LOCAL, &rp_msg);
+        if (rp_msg.cc != PECI_DEV_CC_SUCCESS)
+            ret = -EAGAIN;
+        if (ret)
+            return ret;
+
+        priv->temp_max[dimm_no] = rp_msg.pci_config[1] * 1000;
+        priv->temp_crit[dimm_no] = rp_msg.pci_config[2] * 1000;
+        break;
+    case INTEL_FAM6_HASWELL_X:
+    case INTEL_FAM6_BROADWELL_X:
+        rp_msg.addr = priv->mgr->client->addr;
+        rp_msg.bus = 1;
+        /*
+         * Device 20, Function 0: IMC 0 channel 0 -> rank 0
+         * Device 20, Function 1: IMC 0 channel 1 -> rank 1
+         * Device 21, Function 0: IMC 0 channel 2 -> rank 2
+         * Device 21, Function 1: IMC 0 channel 3 -> rank 3
+         * Device 23, Function 0: IMC 1 channel 0 -> rank 4
+         * Device 23, Function 1: IMC 1 channel 1 -> rank 5
+         * Device 24, Function 0: IMC 1 channel 2 -> rank 6
+         * Device 24, Function 1: IMC 1 channel 3 -> rank 7
+         */
+        rp_msg.device = 20 + chan_rank / 2 + chan_rank / 4;
+        rp_msg.function = chan_rank % 2;
+        rp_msg.reg = 0x120 + dimm_order * 4;
+        rp_msg.rx_len = 4;
+
+        ret = peci_command(priv->mgr->client->adapter,
+                   PECI_CMD_RD_PCI_CFG_LOCAL, &rp_msg);
+        if (rp_msg.cc != PECI_DEV_CC_SUCCESS)
+            ret = -EAGAIN;
+        if (ret)
+            return ret;
+
+        priv->temp_max[dimm_no] = rp_msg.pci_config[1] * 1000;
+        priv->temp_crit[dimm_no] = rp_msg.pci_config[2] * 1000;
+        break;
+    default:
+        return -EOPNOTSUPP;

It looks like the sensors are created even on unsupported platforms,
which would generate error messages whenever someone tries to read
the attributes.

There should be some code early on checking this, and the driver
should not even instantiate if the CPU model is not supported.

Actually, this 'default' case will not be happened because this driver
will be registered only when the CPU model is supported. The CPU model
checking code is in 'intel-peci-client.c' which is [11/14] of this
patch set.


That again assumes that both drivers will be modified in sync in the future.
We can not make that assumption.

As you said, both drivers must be modified in sync in the future because
each Intel CPU family uses different way of reading DIMM temperature.
In case if supported CPU checking code updated without making sync with
it, this driver will return the error.

[...]

+    ret = create_dimm_temp_info(priv);
+    if (ret && ret != -EAGAIN) {
+        dev_err(dev, "Failed to create DIMM temp info\n");

Does this generate error messages if there are no DIMMS ?

Yes, this error message will be printed out once if it meets a timeout
in DIMM scanning when there is no DIMM.


Is that indeed an error, or are there situations where no DIMMs are
detected and that is a perfectly valid situation ? An error message
is only acceptable if this is indeed an error in all situations.

If a machine under monitoring has two Intel CPUs installed but only one
CPU has a DIMM, it's also an working configuration although it's an
unusual H/W configuration. I'll fix that to dbg printing.

Thanks,

Jae



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux