On Fri, Dec 13, 2019 at 09:56:05AM +0800, Chen Zhou wrote: > Fix sparse warning: > > drivers/hwmon/w83627ehf.c:1202:1: warning: symbol 'sensor_dev_attr_pwm1_target' was not declared. Should it be static? ... > > Reported-by: Hulk Robot <hulkci@xxxxxxxxxx> > Signed-off-by: Chen Zhou <chenzhou10@xxxxxxxxxx> Applied (though I removed most of the log messages - there no point of having all of them in the commit message). Guenter > --- > drivers/hwmon/w83627ehf.c | 56 +++++++++++++++++++++++------------------------ > 1 file changed, 28 insertions(+), 28 deletions(-) > > diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c > index 207cc74..0a13f6b 100644 > --- a/drivers/hwmon/w83627ehf.c > +++ b/drivers/hwmon/w83627ehf.c > @@ -1199,22 +1199,22 @@ store_tolerance(struct device *dev, struct device_attribute *attr, > return count; > } > > -SENSOR_DEVICE_ATTR(pwm1_target, 0644, show_target_temp, > +static SENSOR_DEVICE_ATTR(pwm1_target, 0644, show_target_temp, > store_target_temp, 0); > -SENSOR_DEVICE_ATTR(pwm2_target, 0644, show_target_temp, > +static SENSOR_DEVICE_ATTR(pwm2_target, 0644, show_target_temp, > store_target_temp, 1); > -SENSOR_DEVICE_ATTR(pwm3_target, 0644, show_target_temp, > +static SENSOR_DEVICE_ATTR(pwm3_target, 0644, show_target_temp, > store_target_temp, 2); > -SENSOR_DEVICE_ATTR(pwm4_target, 0644, show_target_temp, > +static SENSOR_DEVICE_ATTR(pwm4_target, 0644, show_target_temp, > store_target_temp, 3); > > -SENSOR_DEVICE_ATTR(pwm1_tolerance, 0644, show_tolerance, > +static SENSOR_DEVICE_ATTR(pwm1_tolerance, 0644, show_tolerance, > store_tolerance, 0); > -SENSOR_DEVICE_ATTR(pwm2_tolerance, 0644, show_tolerance, > +static SENSOR_DEVICE_ATTR(pwm2_tolerance, 0644, show_tolerance, > store_tolerance, 1); > -SENSOR_DEVICE_ATTR(pwm3_tolerance, 0644, show_tolerance, > +static SENSOR_DEVICE_ATTR(pwm3_tolerance, 0644, show_tolerance, > store_tolerance, 2); > -SENSOR_DEVICE_ATTR(pwm4_tolerance, 0644, show_tolerance, > +static SENSOR_DEVICE_ATTR(pwm4_tolerance, 0644, show_tolerance, > store_tolerance, 3); > > /* Smart Fan registers */ > @@ -1291,35 +1291,35 @@ store_##reg(struct device *dev, struct device_attribute *attr, \ > > fan_time_functions(fan_stop_time, FAN_STOP_TIME) > > -SENSOR_DEVICE_ATTR(pwm4_stop_time, 0644, show_fan_stop_time, > +static SENSOR_DEVICE_ATTR(pwm4_stop_time, 0644, show_fan_stop_time, > store_fan_stop_time, 3); > -SENSOR_DEVICE_ATTR(pwm4_start_output, 0644, show_fan_start_output, > +static SENSOR_DEVICE_ATTR(pwm4_start_output, 0644, show_fan_start_output, > store_fan_start_output, 3); > -SENSOR_DEVICE_ATTR(pwm4_stop_output, 0644, show_fan_stop_output, > +static SENSOR_DEVICE_ATTR(pwm4_stop_output, 0644, show_fan_stop_output, > store_fan_stop_output, 3); > -SENSOR_DEVICE_ATTR(pwm4_max_output, 0644, show_fan_max_output, > +static SENSOR_DEVICE_ATTR(pwm4_max_output, 0644, show_fan_max_output, > store_fan_max_output, 3); > -SENSOR_DEVICE_ATTR(pwm4_step_output, 0644, show_fan_step_output, > +static SENSOR_DEVICE_ATTR(pwm4_step_output, 0644, show_fan_step_output, > store_fan_step_output, 3); > > -SENSOR_DEVICE_ATTR(pwm3_stop_time, 0644, show_fan_stop_time, > +static SENSOR_DEVICE_ATTR(pwm3_stop_time, 0644, show_fan_stop_time, > store_fan_stop_time, 2); > -SENSOR_DEVICE_ATTR(pwm3_start_output, 0644, show_fan_start_output, > +static SENSOR_DEVICE_ATTR(pwm3_start_output, 0644, show_fan_start_output, > store_fan_start_output, 2); > -SENSOR_DEVICE_ATTR(pwm3_stop_output, 0644, show_fan_stop_output, > +static SENSOR_DEVICE_ATTR(pwm3_stop_output, 0644, show_fan_stop_output, > store_fan_stop_output, 2); > > -SENSOR_DEVICE_ATTR(pwm1_stop_time, 0644, show_fan_stop_time, > +static SENSOR_DEVICE_ATTR(pwm1_stop_time, 0644, show_fan_stop_time, > store_fan_stop_time, 0); > -SENSOR_DEVICE_ATTR(pwm2_stop_time, 0644, show_fan_stop_time, > +static SENSOR_DEVICE_ATTR(pwm2_stop_time, 0644, show_fan_stop_time, > store_fan_stop_time, 1); > -SENSOR_DEVICE_ATTR(pwm1_start_output, 0644, show_fan_start_output, > +static SENSOR_DEVICE_ATTR(pwm1_start_output, 0644, show_fan_start_output, > store_fan_start_output, 0); > -SENSOR_DEVICE_ATTR(pwm2_start_output, 0644, show_fan_start_output, > +static SENSOR_DEVICE_ATTR(pwm2_start_output, 0644, show_fan_start_output, > store_fan_start_output, 1); > -SENSOR_DEVICE_ATTR(pwm1_stop_output, 0644, show_fan_stop_output, > +static SENSOR_DEVICE_ATTR(pwm1_stop_output, 0644, show_fan_stop_output, > store_fan_stop_output, 0); > -SENSOR_DEVICE_ATTR(pwm2_stop_output, 0644, show_fan_stop_output, > +static SENSOR_DEVICE_ATTR(pwm2_stop_output, 0644, show_fan_stop_output, > store_fan_stop_output, 1); > > > @@ -1327,17 +1327,17 @@ SENSOR_DEVICE_ATTR(pwm2_stop_output, 0644, show_fan_stop_output, > * pwm1 and pwm3 don't support max and step settings on all chips. > * Need to check support while generating/removing attribute files. > */ > -SENSOR_DEVICE_ATTR(pwm1_max_output, 0644, show_fan_max_output, > +static SENSOR_DEVICE_ATTR(pwm1_max_output, 0644, show_fan_max_output, > store_fan_max_output, 0); > -SENSOR_DEVICE_ATTR(pwm1_step_output, 0644, show_fan_step_output, > +static SENSOR_DEVICE_ATTR(pwm1_step_output, 0644, show_fan_step_output, > store_fan_step_output, 0); > -SENSOR_DEVICE_ATTR(pwm2_max_output, 0644, show_fan_max_output, > +static SENSOR_DEVICE_ATTR(pwm2_max_output, 0644, show_fan_max_output, > store_fan_max_output, 1); > -SENSOR_DEVICE_ATTR(pwm2_step_output, 0644, show_fan_step_output, > +static SENSOR_DEVICE_ATTR(pwm2_step_output, 0644, show_fan_step_output, > store_fan_step_output, 1); > -SENSOR_DEVICE_ATTR(pwm3_max_output, 0644, show_fan_max_output, > +static SENSOR_DEVICE_ATTR(pwm3_max_output, 0644, show_fan_max_output, > store_fan_max_output, 2); > -SENSOR_DEVICE_ATTR(pwm3_step_output, 0644, show_fan_step_output, > +static SENSOR_DEVICE_ATTR(pwm3_step_output, 0644, show_fan_step_output, > store_fan_step_output, 2); > > static ssize_t
