RE: [PATCH v6 1/2] hwmon: Add driver for Texas Instruments TMP512/513 sensor chips

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> On 10/29/19 8:04 AM, Tremblay, Eric wrote:
> > dt-bindings: hwmon: Add TMP512/513
> >
> > Add dt-binding for TMP512/513 sensor chips
> >
> > Signed-off-by: Eric Tremblay <etremblay@xxxxxxxxxxxxxxxxxxxx>
> I do get the following warnings:
> 
> Documentation/hwmon/tmp513.rst:2: WARNING: Explicit markup ends without a blank line; unexpected unindent.
> Documentation/hwmon/tmp513.rst: WARNING: document isn't included in any toctree
> 
> The .rst file needs to be added to Documentation/hwmon/index.rst. No idea what the first problem is.
> 
> Guenter

The first warning was a missing empty line after the license-Identifier.

I'll wait for bindings review then resubmit with the documentations fixes.

Thanks
 
> 
> > ---
> >   .../devicetree/bindings/hwmon/ti,tmp513.yaml  | 88 +++++++++++++++++++
> >   1 file changed, 88 insertions(+)
> >   create mode 100644
> > Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> > b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> > new file mode 100644
> > index 000000000000..e5f3c72ff548
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> > @@ -0,0 +1,88 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # Copyright 2018
> > +Linaro Ltd.
> > +%YAML 1.2
> > +---
> > +
> > +$id:
> > +https://urldefense.proofpoint.com/v2/url?u=http-3A__devicetree.org_sc
> > +hemas_hwmon_ti-2Ctmp513.yaml-23&d=DwICaQ&c=tvvHx3uC0XdtgG-ImPDjfM0Qna
> > +kIsmmGcwejQDVxD-g&r=y34zLl9_AvBy5NSrvskG6SFbiKoCzI99WW2xhKlsVV4&m=gHR
> > +Ok_Dbgs_OeUN4Ho5czv_vfxbxT5oJboKcfQ8pb9c&s=HvM497Y_TfiYsrbgEJwUA7akpT
> > +8B1iw574s8U07g33U&e=
> > +$schema:
> > +https://urldefense.proofpoint.com/v2/url?u=http-3A__devicetree.org_me
> > +ta-2Dschemas_core.yaml-23&d=DwICaQ&c=tvvHx3uC0XdtgG-ImPDjfM0QnakIsmmG
> > +cwejQDVxD-g&r=y34zLl9_AvBy5NSrvskG6SFbiKoCzI99WW2xhKlsVV4&m=gHROk_Dbg
> > +s_OeUN4Ho5czv_vfxbxT5oJboKcfQ8pb9c&s=xN_rsjAGGv2726S7t192bq_USllTcJ6n
> > +85vSlDFWjV8&e=
> > +
> > +title: TMP513/512 system monitor sensor
> > +
> > +maintainers:
> > +  - Eric Tremblay <etremblay@xxxxxxxxxxxxxxxxxxxx>
> > +
> > +description: |
> > +  The TMP512 (dual-channel) and TMP513 (triple-channel) are system
> > +monitors that include
> > +  remote sensors, a local temperature sensor, and a high-side current shunt monitor.
> > +  These system monitors have the capability of measuring remote
> > +temperatures,
> > +  on-chip temperatures, and system voltage/power/current consumption.
> > +
> > +  Datasheets:
> > +
> > + https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ti.com_lit_g
> > + pn_tmp513&d=DwICaQ&c=tvvHx3uC0XdtgG-ImPDjfM0QnakIsmmGcwejQDVxD-g&r=y
> > + 34zLl9_AvBy5NSrvskG6SFbiKoCzI99WW2xhKlsVV4&m=gHROk_Dbgs_OeUN4Ho5czv_
> > + vfxbxT5oJboKcfQ8pb9c&s=rJ6zr6BprlwewjKUzVr6PeEqP6cCsdxTF_SzNOmwZiA&e
> > + =
> > + https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ti.com_lit_g
> > + pn_tmp512&d=DwICaQ&c=tvvHx3uC0XdtgG-ImPDjfM0QnakIsmmGcwejQDVxD-g&r=y
> > + 34zLl9_AvBy5NSrvskG6SFbiKoCzI99WW2xhKlsVV4&m=gHROk_Dbgs_OeUN4Ho5czv_
> > + vfxbxT5oJboKcfQ8pb9c&s=NCK1yfHisyz7dLEylm8cObUISdImgC5OCY1wV9TJdsA&e
> > + =
> > +
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - ti,tmp512
> > +      - ti,tmp513
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  shunt-resistor-micro-ohms:
> > +    description: |
> > +      If 0, the calibration process will be skiped and the current and power
> > +      measurement engine will not work. Temperature and voltage measurement
> > +      will continue to work.
> > +      The shunt value also need to respect : rshunt <= pga-gain * 40 * 1000 * 1000.
> > +      If not, it's not possible to compute a valid calibration value.
> > +    default: 1000
> > +
> > +  ti,pga-gain:
> > +    description: |
> > +      The gain value for the PGA function. This is 8, 4, 2 or 1.
> > +      The PGA gain affect the shunt voltage range.
> > +      The range will be equal to: pga-gain * 40mV
> > +    allOf:
> > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > +    enum: [1, 2, 4, 8]
> > +    default: 8
> > +
> > +  ti,bus-voltage-range-volt:
> > +    description: |
> > +      This is the operating range of the bus voltage
> > +    allOf:
> > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > +    enum: [16, 32]
> > +    default: 32
> > +
> > +  ti,nfactor:
> > +    description: |
> > +      Array of three(TMP513) or two(TMP512) n-Factor value for each remote
> > +      temperature channel.
> > +      See datasheet Table 11 for n-Factor range list and value interpretation.
> > +    allOf:
> > +      - $ref: /schemas/types.yaml#definitions/uint8-array
> > +      - minItems: 2
> > +        maxItems: 3
> > +        items:
> > +          default: 0
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +
> > +examples:
> > +  - |
> > +    i2c {
> > +        tmp513@5c {
> > +            compatible = "ti,tmp513";
> > +            reg = <0x5C>;
> > +            shunt-resistor-micro-ohms = <330000>;
> > +            ti,bus-voltage-range-volts = <32>;
> > +            ti,pga-gain = <8>;
> > +            ti,nfactor = [01 F3 00];
> > +        };
> > +    };
> >





[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux