Version six of the driver for Texas Instruments TMP512/513 sensors. Except for the renaming of the shunt-resistor-micro-ohms property, the changes are only in the binding documentation. Thanks Main changes from version 5: - Use shunt-resistor-micro-ohms standard property - Fix alignment between 'enum' and 'default' in dt-bindings Main changes from version 4: - Remove config_lock mutex - Rewrite dt-bindings in yaml Main changes from version 3: - Remove tmp51x_config structure, there was no useful static field in the structure. The data was moved to tmp51x_data structure. - Remove platform data - use device_ API instead of of_device API - Use array for n-Factor values. - Set shunt default value to 1000 uOhms Main changes from version 2: - Remove the neccessity to provide a shunt-resistor value - Remove max-expected-current-ma configuration and always use max possible current for calibration - Make sure calculation during calibration can't overflow - Add value clamping for DT value and runtime parameters - Support non DT system - Move hysteresis from DT to standard attribute Main changes from version 1: - Use the with_info API instead of sysfs attributes. - Remove non-standard attributes and raw value. - Move settings that were non-standard attributes to device tree, update documentation as well. - Fix coding style issues Eric Tremblay (2): dt-bindings: hwmon: Add TMP512/513 hwmon: Add driver for Texas Instruments TMP512/513 sensor chips. .../devicetree/bindings/hwmon/ti,tmp513.yaml | 88 ++ Documentation/hwmon/tmp513.rst | 102 +++ MAINTAINERS | 7 + drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/tmp513.c | 785 ++++++++++++++++++ 6 files changed, 993 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml create mode 100644 Documentation/hwmon/tmp513.rst create mode 100644 drivers/hwmon/tmp513.c -- 2.17.1
