From: "amy.shih" <amy.shih@xxxxxxxxxxxxxxxx>
Voltage sensors overlap with external temperature sensors. Detect
the multi-function of voltage, thermal diode, thermistor and
reserved from register VT_ADC_MD_REG to set value of vsen_mask &
tcpu_mask & temp_mode in nct7904_data struct. If the value is
reserved, needs to disable the vsen_mask & tcpu_mask.
Signed-off-by: amy.shih <amy.shih@xxxxxxxxxxxxxxxx>
---
drivers/hwmon/nct7904.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c
index b26419dbe840..281c81edabc6 100644
--- a/drivers/hwmon/nct7904.c
+++ b/drivers/hwmon/nct7904.c
@@ -82,6 +82,10 @@
#define FANCTL1_FMR_REG 0x00 /* Bank 3; 1 reg per channel */
#define FANCTL1_OUT_REG 0x10 /* Bank 3; 1 reg per channel */
+#define VOLT_MONITOR_MODE 0x0
+#define THERMAL_DIODE_MODE 0x1
+#define THERMISTOR_MODE 0x3
+
#define ENABLE_TSI BIT(1)
static const unsigned short normal_i2c[] = {
@@ -935,11 +939,16 @@ static int nct7904_probe(struct i2c_client *client,
for (i = 0; i < 4; i++) {
val = (ret >> (i * 2)) & 0x03;
bit = (1 << i);
- if (val == 0) {
+ if (val == VOLT_MONITOR_MODE) {
data->tcpu_mask &= ~bit;
+ } else if (val == THERMAL_DIODE_MODE && i < 2) {
+ data->temp_mode |= bit;
+ data->vsen_mask &= ~(0x06 << (i * 2));
+ } else if (val == THERMISTOR_MODE) {
+ data->vsen_mask &= ~(0x02 << (i * 2));
} else {
- if (val == 0x1 || val == 0x2)
- data->temp_mode |= bit;
+ /* Reserved */
+ data->tcpu_mask &= ~bit;
data->vsen_mask &= ~(0x06 << (i * 2));
}
}
--
2.17.1
